-35%

US license plate holder with tail light support

US license plate holder with tail light support

US license plate holder with tail light support

US license plate holder with tail light support

US license plate holder with tail light support

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint.

This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates.

It's compatible with this Vintage Tail Light.

Made in France

$33 $51 -35%

Tax included In Stock

Description
Product Details

Overall dimensions : 96 mm (height), 169 mm (width)

Catégorie: Accessoires
Type of part: Body and suspension
Modèles: Bonneville (2000-2016)
Bonneville Bobber (2017-…)
Bonneville T100 (2016-…)
Bonneville T120 (2016-…)
Bullet / Classic (2008-..)
Continental GT 535
Himalayan 400
Interceptor / Continental GT 650
NineT (standard)
NineT Pure
NineT Racer
NineT Scrambler
NineT Urban G/S
Scrambler (2006-2016)
Speed Twin 1200 (2019-…)
Street Scrambler / Scrambler 900 (2016-…)
Street Twin / Speed Twin 900 (2016-...)
Thruxton (2004-2016)
Thruxton 1200 (2016-…)
Triumph Scrambler 1200 X / XC / XE
V7 850
V7 I & V7 II (2007-2017)
V7 III (2017-…)
V9 (2016-…)
Products: Cycle parts

Customers who bought this product also bought:

Classic rear mudguard for BMW NineT

Classic rear mudguard for BMW NineT 2

-35%

Bmw

Classic rear mudguard for BMW NineT

$276 $424

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

-15%

Parts

Round mirror ø8 steel for motorcycle

$38 $44

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Classic headlight with integrated speedometer for Triumph before 2016

Classic headlight with integrated speedometer for Triumph before 2016 2

Triumph

Classic Headlight / Integrated Speedometer for Triumph (pre-2016)

Classic headlight with integrated speedometer for Triumph (before 2016 – air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal headlight with M8 side mounts, is the ideal way to visually lighten the front of your bike while retaining advanced speedometer functionalities. This speedometer is offered in a plug & play version,...

Starter cover for Moto Guzzi V7 / V9

Starter cover for Moto Guzzi V7 / V9 2

-35%

Moto Guzzi

Starter cover for Moto Guzzi V7 / V9

$40 $62

Starter cover for Moto Guzzi V7 and V9. Manufactured out of aluminium, this starter cover is easy to assemble over the original part. It's available in Satin black (powder coated) or Brushed aluminium. This part is suitable for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9. Designed and manufactured by our team in France.

Resistors for LED turn indicators

-15%

Parts

Resistors for LED turn indicators

$14 $17

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9 2

Moto Guzzi

Monza gas cap for Moto Guzzi V7III / V9

Monza gas cap for Moto Guzzi V7 III and V9. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter. It doesn't have any lock system and simply opens by pushing on the opening button. It is only...

Headlight struts

Headlight struts 2

-40%

Parts

Headlight struts

$15 $25

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

$20 $34

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...