Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi. This wiring harness is essential to connect an aftermarket set of turn indicators and taillight on your Moto Guzzi. It's plug & play over the factory connector. This parts fit the Moto Guzzi V7, V7 II, V7 III, V7 850 and V9. It's available in Short and Long size.

Subject to the right wiring length on your turn indicators, we advice to select the short size for an installation on your shock absorbers axle or long size for an installation on you license plate in rear position.

Comes standard with all the mudguards we provide for Moto Guzzi. This wiring harness is designed and manufactured at our workshop in France.

$21

Tax included In stock

Product Details

Brand: Moto GUZZI
Univers: Motocyclette
Catégorie: Accessoires
Type of part: Body and suspension
Phare & Clignotants
Modèles: V7 I & V7 II (2007-2017)
V7 III (2017-…)
V9 (2016-…)
Products: Phare & Clignotants

Customers who bought this product also bought:

License plate holder for Moto Guzzi V9 original mudguard

License plate holder for Moto Guzzi V9 original mudguard 2

V9 (2016 -...)

License plate holder for Moto Guzzi V9 original mudguard

License plate holder for Moto Guzzi V9 original rear mudguard. This satin black powder coat painted part comes in place of your original taillight unit. It is composed of a license plate holder, a round LED taillight (EU approved)with plate lightning, a pair of turn indicators brackets on choice, a plug & play wiring harness and optional turn...

Front turn indicators bracket for Moto Guzzi V7 / V9

Front turn indicators bracket for Moto Guzzi V7 / V9 2

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

Heritage headlight

Heritage headlight 2

Parts

Heritage headlight

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

Starter cover for Moto Guzzi V7 / V9

Starter cover for Moto Guzzi V7 / V9 2

Moto Guzzi

Starter cover for Moto Guzzi V7 / V9

Starter cover for Moto Guzzi V7 and V9. Manufactured out of aluminium, this starter cover is easy to assemble over the original part. It's available in Satin black (powder coated) or Brushed aluminium. This part is suitable for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9. Designed and manufactured by our team in France.

BAAK License plate lightning

BAAK License plate lightning 2

Parts

License plate lightning

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Resistors for LED turn indicators

Parts

Resistors for LED turn indicators

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Classic Medium front mudguard for Moto Guzzi

Classic Medium front mudguard for Moto Guzzi 2

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Headlight harness for Moto Guzzi

Headlight harness for Moto Guzzi 2

Parts

Headlight harness for Moto Guzzi

This headlight cluster for Moto Guzzi is compatible with V7, V7 II, V7 III, and V7 850 models. Ideal for your motorcycle customization projects. Two choices for : Plug-and-play installation of an adaptable headlight. Convert your Moto Guzzi, which has an original LED headlight, for an adaptable bulb headlight. Sold individually.Made in France