Products

Showing 217-252 of 450 item(s)

Leather goods

Leather satchel-style bag for 14" laptop BAAK

This laptop satchel is designed for 14-inch models in black or aged brown. Timeless colors that will develop character over time. Dimensions (in cm) Length: 36Width: 26.5

View

Biker equipment

Leather satchel-style laptop sleeve 16" BAAK

€135.00

This 16-inch laptop pouch is available in black and aged brown. It will accessorize all your outfits with elegance and refinement. Dimensions (in cm) Length: 40.5Width: 27.5

View

Leather goods

Card holder in leather BAAK

€69.00

This map holder with a timeless design is available in aged brown and black. It features 3 compartments, allowing you to store your cards and bills. Its small, compact format makes it pleasant to carry wherever you go.

View

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

-20%

Parts

Turn signal brackets for Triumph Bobber 1200

€20.00 €25.00

Time left

Kit of turn signal brackets to relocate the front turn signals of your Triumph Bobber 1200 and thus streamline its lines. The bracket mounts at the level of your oil radiator.

View

BAAK Turn indicators brackets kit for Triumph Bobber 1200

BAAK Turn indicators brackets kit for Triumph Bobber 1200 2

Parts

Turn signal kit for Triumph Bobber 1200

€390.00

This kit lets you relocate the turn signals on your Bobber 1200 to streamline its lines. The rear turn signals incorporate the brake lights.

Rear BAAK wiring harness for Triumph Bobber 1200

Rear BAAK wiring harness for Triumph Bobber 1200 2

Parts

Rear wiring harness for Triumph Bobber 1200

€39.00

These adapters allow you to connect any accessory to the stock wiring harness of your Bobber 1200 without having to cut or solder any wires.

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi 2

Parts

Turn Signals + Brake Light 3-in-1 - Full Black

€156.00

These elegant aluminium turn signals streamline your motorcycle. The rear turn signals integrate brake lights and position lights. The front turn signals are classic and only provide the turn signal function. Powerful lighting. Stem M8 ø, 38mm long, 22mm ø lens.

View

Triumph

Rear fender for Triumph Bobber 1200

€495.00

Rear fender for Triumph Bonneville Bobber 1200 in stainless steel. Its molded end gives it a raw, classic and elegant look. Although shorter than the original, it provides good protection against rear wheel spray.Made in France

View

US license plate bracket with license plate light bracket

US license plate bracket with license plate light bracket 2

-20%

Parts

US license plate bracket with license plate light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (horizontal) license plates. It is made from 3mm thick aluminum, finished in satin black epoxy paint. This bracket allows mounting a license plate light. It is mandatory to purchase one of our license plate brackets offered by BAAK.

-20%

Universal

US license plate bracket

€18.24 €22.80

Time left

This license plate bracket is designed for US-format (horizontal) license plates. It is made from 3mm thick aluminium, painted with satin black epoxy paint. It is essential to purchase one of our license plate brackets offered by BAAK.

US license plate bracket with integrated stop-light bracket

US license plate bracket with integrated stop-light bracket 2

-20%

Parts

US license plate bracket with integrated stop-light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format license plates (horizontal 170x100mm). It is made from 3mm thick aluminium, painted with satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit US plates. It is compatible with this Vintage Tail Light. Made in France

Flat leather seat for Royal Enfield Interceptor / Continental GT

Parts

Flat leather seat for Royal Enfield Interceptor / Continental GT

€540.00

This leather seat changes the look of your Royal Enfield Interceptor / Continental GT without compromising on comfort. It reshapes the bike's line and endures, from daily rides to long outings. The <strong,double-tanned leather does not wear out, it develops a patina: the seat gains character as the miles go by. Leather that ages well is a seat you...

View

Adapter for high front fender and Bates headlight (Street Scrambler 2019-...)

Parts

Adapter for high front fender and Bates headlight (Street Scrambler 2019-...)

€30.00

Essential to mount the BAAK bates headlights and the BAAK front scrambler fender on Street Scrambler models from 2019 onward.

Leather goods

Leather tool roll

€149.00

BAAK leather tool roll with visible stitching and heat-stamped logo. Multiple compartments, both open and closed. Top flap secures the tools inside the roll. Closed dimensions (cm): H 10, W 26Open dimensions (cm): H 40, W 40

View

Leather goods

Large leather pot cover

€69.00

BAAK leather pot cover with visible stitching and hot-stamped logo. Handcrafted in our workshops from our selected leathers. Dimensions (cm): H 19 ø24

Engine guard BAAK for Triumph T100/ T120

Engine guard BAAK for Triumph T100/ T120 2

-20%

Parts

Engine guard TRAIL for Triumph T100/ T120

€116.00 €145.00

Time left

Aluminum engine guard Trail for Triumph T100/T120 (2016-…) with an adventurer look for the best protection.

BAAK | Mini Daytona speedometer for Royal Enfield 650

BAAK | Mini Daytona speedometer for Royal Enfield 650 2

Parts

Mini speedometer Daytona for Royal Enfield 650

€369.00

Daytona 60 speedometer for Royal Enfield 650 Interceptor / Continental GT (2018-...) This plug & play speedometer solution is ideal for simplifying the cockpit of your Royal Enfield while retaining the functions of your original instrument. The speedometer is delivered pre-wired, with its wiring harness, and its satin black aluminum mounting plate....

BAAK | Classic headlight with large integrated Daytona speedometer for RE 650

BAAK | Classic headlight with large integrated Daytona speedometer for RE 650 2

Parts

Classic headlight with large Daytona integrated speedometer for Royal Enfield 650...

€599.00

Daytona W Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018-...) This headlight with integrated speedometer plug & play solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functions of your original speedometer. The speedometer is delivered pre-wired. It features a needle speedometer and...

View

BAAK | Large Daytona Speedometer for Royal Enfield 650

BAAK | Large Daytona Speedometer for Royal Enfield 650 2

Parts

Daytona main speedometer for Royal Enfield 650 Interceptor / Continental GT

€489.00

Daytona W Speedo for Royal Enfield 650 Interceptor / Continental GT (2018-...) This plug & play speedo solution with tachometer is ideal to streamline the cockpit of your Royal Enfield while retaining the functions of your original instrument. The speedo is supplied pre-wired, with its satin black stainless mounting plate available for either the...

View

Parts

BAAK replacement silencer

€588.00

BAAK replacement exhaust silencers are sold in pairs with mounting brackets and bolts. Select your motorcycle model and we will craft these silencers to fit perfectly with BAAK headers. The muted tone remains the same, the finish matched.

View

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650 2

-20%

Home

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650

€396.00 €495.00

Time left

Give your motorcycle a Roadster look by freeing the space of the original airbox on your Royal Enfield Interceptor or Continental GT by replacing it with this airbox delete kit. This kit creates a hollowed area, visually lightening the bike. The air filters will no longer be hidden, their function revealed. This kit includes: 2 air filters a crankcase...

Low fender for 17-inch wheel on Royal Enfield Interceptor / Continental GT 650

Low fender for 17-inch wheel on Royal Enfield Interceptor / Continental GT 650 2

-20%

Front end & chassis

Low fender for 17-inch wheel on Royal Enfield Interceptor / Continental GT 650

€228.00 €285.00

Time left

This low mini Classic front fender for 17” wheel for Interceptor / Continental GT 650 lets you fit a fender very close to your 17‑inch front wheel. We designed a bracket delivered with it so it adapts to the new height of your front wheel and visually lowers the look of your Royal Enfield. The Roadster look within reach… Made in France

View

Output shaft sprocket -1 tooth for Interceptor / Continental GT 650

Engine & Exhaust

Output shaft sprocket -1 tooth for Interceptor / Continental GT 650

€57.00

Change from 15 to 14 teeth on your rear sprocket and gain torque across the entire rev range. Acceleration will be crisper and stronger, without sacrificing top speed. We fit these sprockets to our Royal Enfield Interceptor BAAK Aventures to be more comfortable on our off-road routes!

Fork spring preload spacers for Triumph Street Scrambler (after 2016)

Fork spring preload spacers for Triumph Street Scrambler (after 2016) 2

-15%

Street / Speed Twin 900 (2016 -...)

Fork spring preload spacers for Triumph Street Scrambler (after 2016)

€16.15 €19.00

Time left

This pair of stainless steel fork spring shims raises the front of your Triumph Street Scrambler (2016-...) by 10 mm, notably to keep the bike's rake similar to the original when fitting longer shocks. These shims are fitted simply in addition to the original fork springs.

Triumph

Tracker kit for Triumph Street Twin / T100 (after 2016)

€6,600.00

Our craftsmen developed this kit to give the Triumph Street Twin and Bonneville T100 (2016-...) a Tracker spirit. We worked on both aesthetics and road behavior to make the machine more playful. Compact, stripped-back, aggressive... a set of superlatives that will make your bike stand out thanks to this kit.Build your pack by choosing your leather color,...

View

Leather wiring-harness cover for air-box removal on Triumph Bobber (2017-...)

Bonneville Bobber (2017 -...)

Leather wiring harness cover for airbox removal on Triumph Bobber (2017-...)

€165.00

Our Airbox delete kit for Triumph Bobber 1200 (2017-...) allows you to remove your original airbox. We now offer the elegant leather piece that conceals the wiring harness separately, without air filters. Designed and made by our craftsmen, we offer this wiring-harness cover in brown leather, black leather, gold leather and ruby (red) leather.

View

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal dual-headlight headlight fairing draws its inspiration from 1980s trail bikes. Ideal for a Scrambler project, this fairing is designed by us and made from fiberglass. It includes an extension of the wiring harness and aluminum mounting brackets that attach to the fork tubes (ø39 - ø40mm / ø41 - ø42mm / ø43mm optional).We offer it in a raw...

View

Long Trail shock absorbers for Royal Enfield 650 Interceptor

Long Trail shock absorbers for Royal Enfield 650 Interceptor 2

Interceptor / Continental GT 650

2Win TRAIL shocks for Royal Enfield 650 Interceptor

€517.20

2Win Trail aluminum shock absorbers for Royal Enfield 650 Interceptor / Continental GT (2018-...). These 2Win shock absorbers are adjustable in spring preload and hydraulics. Each click of the knob simultaneously alters the compression and rebound hydraulic settings, very simple to use. They are 20mm longer than your original shock absorbers (+15mm of...

License plate bracket for US side-mounted plate

License plate bracket for US side-mounted plate 2

-20%

Parts

License plate bracket for US side license plate

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (vertical) license plates mounted in a side position. It is made from 3mm-thick aluminum, painted with satin black epoxy paint. It is essential to purchase one of our BAAK side license plate brackets.

Leather side saddlebag for BMW NineT by BAAK

Leather side saddlebag for BMW NineT by BAAK 2

Parts

Leather saddlebag for BMW R NineT

€289.99

This leather side saddlebag for BMW R 1200 NineT replaces the original airbox cover. Its construction is based on an aluminum plate ensuring a rigid mounting to your machine, covered in leather to create a result in harmony with the shape of your tank. This saddlebag is available in Aged Brown leather, black, gold.

View

Replacement air filters for Triumph Bobber 1200 airbox delete kit

Replacement air filters for Triumph Bobber 1200 airbox delete kit 2

-20%

Bonneville Bobber (2017 -...)

Replacement air filters kit for Triumph Bobber 1200 airbox removal kit

€55.20 €69.00

Time left

This pack of replacement air filters is compatible with our Airbox removal kit for Triumph Bobber 1200 (2017-...). It consists of two “pod” style air filters, available in Polished, Brushed or Satin Black finish. The replacement interval for the filters depends on how you use your machine.

View

Reinforced aluminum engine guard for Royal Enfield 650 Interceptor / Continental GT

Reinforced aluminum engine guard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Engine guard Trail for Royal Enfield 650 Interceptor / Continental GT

€100.00 €125.00

Time left

Aluminum engine guard Trail for Royal Enfield 650 Interceptor / Continental GT (2018-...). In addition to giving your machine an adventurer look, it provides real protection for your lower engine in all situations. Its 4mm thick aluminum is a true barrier against terrain irregularities that could strike your lower engine. Very simple to fit, this engine...

View

Black front fender bracket for Royal Enfield Interceptor / Continental GT

Black front fender bracket for Royal Enfield Interceptor / Continental GT 2

Interceptor / Continental GT 650

Front black fender bracket Royal Enfield 650 Interceptor / Continental GT

€48.00

Black front fender bracket for Royal Enfield 650 Interceptor and Continental GT (2018-...). This black front fender bracket replaces the unsightly original grey fender support. It’s the perfect accessory if, like us, you pay particular attention to the finishing details of your machine.Compatible with the original front fender and BAAK front fenders for...

Triumph

Brembo brake pads for Triumph

€51.80

Front brake pads Brembo for Triumph. Softer than the original, these front brake pads made from quality materials will ensure consistently reliable braking, both cold and at high temperatures. The friction coefficient is higher than your original pads, which provides excellent braking performance and increased safety on the road. The kit includes 2 pads...

BAAK leather dye, ideal for motorcycle seats

Parts

Leather dye

€24.00

This leather coloring cream is a maintenance solution. It penetrates the leather and restores a deep black tone. You can use it for your seats but also for any other leather product: shoes, jackets, gloves, leather saddlebags, etc. Contents: 200 ml. Available for Black, Brown, Gold leather.Apply with a cloth, mixed with our maintenance cream (30% dye...

View

Aluminum intake covers for Royal Enfield 650 Interceptor / Continental GT

Aluminum intake covers for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Injection covers for Royal Enfield 650 Interceptor / Continental GT

€52.00 €65.00

Time left

Pair of aluminium injection covers for Royal Enfield 650 Interceptor / Continental GT. These covers replace the originals and will give your machine a more refined look. Supplied as a pair, with all necessary stainless steel fasteners. Available in Satin Black and Brushed finish.

View