Products

Showing 73-85 of 85 item(s)

Large Leather Roll Top Pannier

Large Leather Roll Top Pannier 2

-15%

35 to 45 days

Parts

Large Leather Roll Top Pannier

€762.45 €897.00

Time left

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection 2

15 days

Parts

Removable windshield for Moto Guzzi V7 III / V7 850 / V9

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windscreen. 2 sec to remove without tools. Supplied complete with fastenings and matching headlight brackets, it's available in gloss black or leather (black or brown). Please note that the original headlamp is not suitable, so you'll need a ø180mm classic headlamp and a...

Removable windshield for BMW Nine T Pure and Scrambler

Removable windshield for BMW Nine T Pure and Scrambler 2

-15%

15 days

Parts

Removable windshield for BMW Nine T Pure and Scrambler

€693.60 €816.00

Time left

For BMW Nine T Pure or Scrambler, this retro-touring removable windscreen is the perfect accessory for everyday use or long-distance travel.Easy to remove in 2 seconds without tools, it leaves just four discreet brackets. Please note that it is not compatible with the original headlight, but only with our Bates headlight, to be ordered separately....

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

In stock

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish 2

20 days

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

Classic ø10 round motorcycle mirror in aluminum, long stem

Classic ø10 round motorcycle mirror in aluminum, long stem 2

In stock

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

-15%

In stock

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

€84.15 €99.00

Time left

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

motoscope chronoclassic 2 speedometer for BMW NineT 2017-2023

motoscope chronoclassic 2 speedometer for BMW NineT 2017-2023 2

15 days

Parts

Motoscope chronoclassic 2 speedometer for BMW NineT 2017-2023

Opt for the Chronoclassic 2 Motoscope speedometer by Motogadget for your BMW NineT (2017-2023) and transform your bike in just minutes. This fully wired 'plug and ride' kit is easy to install without any technical knowledge required! Compatible with R9T models (2014-2016) and Euro 4 (post-2017) models such as Urban G/S, Pure, and Scrambler. Installation...

2Win Shock Absorbers for Moto Guzzi V7 III - V9

2Win Shock Absorbers for Moto Guzzi V7 III - V9 2

10 to 15 days

Parts

2Win Shock Absorbers for Moto Guzzi V7 III - V9

2Win Shock Absorbers for Moto Guzzi V7 III and V7 9 These shock absorbers are adjustable in both spring preload and hydraulics. Each click of the adjustment knob simultaneously alters the hydraulic compression and rebound settings, making them very easy to use.

Leather gas tank belt for Moto Guzzi V9 and V7III

Leather gas tank belt for Moto Guzzi V9 and V7III 2

-15%

15 days

Moto Guzzi

Leather gas tank strap for Moto Guzzi V7III / V7 850 / V9

€114.75 €135.00

Time left

Leather gas tank strap / belt for Moto Guzzi V7 III, V7 850 and V9. This strap enables you wrap your gas tank and give it a classy look. It's easy to assemble and as it simply wraps the gas tank and gets adjusted using the adjustment buckle on the nylon strap. Make sure to correctly choose your model of motorcycle so it perfectly fits. It's available in...

VANS 22mm Handlebar Grips

VANS 22mm Handlebar Grips 2

In stock

Parts

VANS 22mm Handlebar Grips

Vans handlebar grips for motorcycles, right and left. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 22mm diameter, also available below in ø25mm. Sold in pairs.

License plate holder for US format with rear light mount

License plate holder for US format with rear light mount 2

-15%

In Stock

Parts

License plate holder for US format with rear light mount

€38.25 €45.00

Time left

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-15%

In Stock

Parts

License plate holder for US format with light mount

€38.25 €45.00

Time left

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

1
2
3
4