Parts » Triumph » Bonneville t120

Short seat kit for Triumph (since 2016)

Short leather seat kit for Triumph Bonneville T100 / T120 / Street Twin and Street Scrambler (new generation). Enables to get a more compact look and the elegance of a leather seat while keeping two seatings.

Comes with:

  • Machined aluminium short subframe system
  • Genuine leather seat
  • Stainless steel mudguard with plate holder and bates taillight
  • Blinkers support

1 150 €

Leather seat for Triumph T120 & T100

Leather seat for Triumph T120 and T100 (from 2016). This leather saddle is handmade by ourself at the workshop. It's 2,5cm narrower than the original one, which considerably improves the look of the Triumph T120 or T100. We use high quality french leather to make this seat. 

The 6cm foam thickness gives a good comfort and a flat seat look. Available in classic ribbed or diamonds rib-shaped.

550 €

Leather seat for Triumph T120 & T100

Leather seat for Triumph T120 and T100 (from 2016). This leather saddle is handcrafted at our workshop. It's 2,5cm narrower than the original one, which considerably improves the look of the Triumph T120 or T100. We use high quality french leather to make this seat. 

The seat foam is 6cm thick which gives a good comfort and a flat look. It's available in classic ribbed or diamonds rib-shaped. 

550 €

Leather saddlebag for Triumph T120, T100, Street Twin

Side leather saddlebag for Triumph Bonneville T120, T100 (from 2016), Street Twin / Cup and Street Scrambler. This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some objetcs and gives a retro distinguished look to your bike.

It comes mounting on a Brushed or Satin black aluminium cover that comes in place of your original side cover. 

220 €

Black leather gas tank strap

Universal leather gas tank strap / belt, fits with any gas tank with cap on the side. It gives a distinguished look to your motorcycle tank. 

It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. It particularly fits for Triumph Bonneville, Scrambler, Thruxton, Street Twin and T120. Maximum lenght 190cm, minimum 107cm.

95 €

Mini rear fender for Triumph Street Twin, T100 & T120

Mini rear fender / mudguard made in stainless steel for Triumph Street Twin, Bonneville T120 and T100 (from 2016). This product includes a round LED taillight, a license plate lightning and a lincense plate support. 

You can choose to place your turn signals on the license plate support or on the shock absorbers axis. 2 models of optional turn signals available.

335 €

Short rear steel fender - Brushed finish

Short rear fender for Triumph Bonneville T120, T100 (from 2016), Street Twin and Street Scrambler, equipped with a taillight with license plate lightning, a license plate support and the blinkers support of your choice.

Shorter than the original one, this stainless steel part is really effective against the sprays and enables you to keep the original passenger bar / grab bar of the Triumph T120. 

335 €

Mini front fender for Triumph

Mini stainless steel front mudguard for Triumph, perfect to modify the look of your motorcycle while keeping a good protection.

It's pre-drilled for the bike of your choice : Triumph Bonneville, Scrambler, Thruxton, and the new Street Twin, Street Scrambler, T100 and T120 from 2016. 

115 €

Medium front mudguard for Triumph

Stainless steel medium front mudguard for Triumph, perfect to visually lighten the look of your motorcycle while keeping a good protection.

This front fender is pre-drilled for the bike of your choice : Triumph Bonneville, Scrambler, Thruxton, and the new Street Twin, Street Scrambler, Thruxton, T100 and T120 2016. 

135 €

Headlight for Triumph T120, T100 & Thruxton

Triumph Bonneville T120, T100 and Thruxton 1200 lighthouse. More flat than the original one (135mm depth), it offers a stronger look to your motorcycle. The casing is in black satin metal, the trin ring is available in brushed and chromed finish.

UE approved. Suits the Bonneville T120, T100 (since 2016) and Thruxton 1200.

95 €

Bates headlight for Triumph

Bates headlight for Triumph. This lower fixation lighthouse is 15cm diameter. Its casing and trim ring enables you to visually lighten your fork tubes and improve the look of your motorcycle.

Suits the Triumph Bonneville / Thruxton / Scrambler (before 2016) and the Triumph Street Twin / T100 / T120 / Thruxton 1200 (since 2016). It comes with a fixation bracket and a plug & play wiring harness.

114,01 €

Engine protection for Triumph T120 / Street Twin

This sump guard / engine protection is made in aluminium. It gives a stronger look to your Triumph Street Twin, Bonneville T120 and T100 (from 2016) or Thruxton 1200. It's 3mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. 

This part is available in satin black or brushed finish.

115 €

Engine protection for Triumph - Satin black

This sump guard / engine protection is made in aluminium. It gives a stronger look to your Triumph Street Twin, Bonneville T120 and T100 (from 2016) or Thruxton 1200. It's 3mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. 

Available in satin black or brushed finish. It comes with all the necessary screwing for an easy mounting on your bike.

115 €

Under handlebar mirror

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility with its wide angle glass.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually. Fit both left and right sides, available in satin black only.

34 €

Monza gas cap

Monza gas tank cap. The legendary Monza cap will perfectly suit your gas tank thanks to our exclusive adapter. 

The full kit includes the gas cap, the seal, the necessary screwing and the adapter. This part is manufactured in aluminium, it's polished finish.

Beware of poor quality copies.

129 €

Bindings headlight

Motorcycle headlight bracket, for M8 side fixation. The brackets are designed and manufactured in BAAK's workshop in France.

Only available in satin black.

  • Ø41mm for TRiumph Bonneville (60mm length for original lighthouse)
  • 40mm and 60mm length for Moto Guzzi V7
  • Ø41mm and length 60mm for Triumph Street and Twin T120 (Doesn't fit with original headlight)

99 €

Bobber exhaust for Triumph (since 2016)

Bobber exhaust line, that suits the Triumph Street Twin, Bonneville T100 and T120 (since 2016), designed and manufactured at our workshop. The manifolds are stainless steel, the mufflers are aluminium. 

It provides a rough and deeper sound, without reasonance, but remains discreet. This part isn't approved for road use. 

1 250 €

Beringer braking kit Triumph T120 & Thruxton 1200

Beringer full front braking kit for Triumph Bonneville T120 and Thruxton 1200. This kit is composed of a radial 4 pistons caliper, 2 brake Classic disks, a clutch control and a master cylinder. 
This kit includes two disks and two calipers. Suits the Triumph new generation only.

650 €

Leather fork gaiters + stainless steel collar

Pair of genuine leather fork gaiters. These 4, 6 or 8 folds fork gaiters are handmade in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. 

Diameter Ø41mm top and Ø63mm bottom, fits for Triumph Bonneville, Thruxton, Scrambler, Street Twin, T120 and Thruxton (except R version) and Moto Guzzi V7.

190 €

Fork gaiters in silicone

High quality silicone fork gaiters. For the following diameters fork tubes :

  • Ø41mm, Bonneville, Scrambler and Thruxton T100, Street Twin and T120. 
  • Ø40mm, Moto Guzzi V7 I, V7 II, V7 III, et V9.

Average length of 8cm (Beware of Chinese plastic ones which will resist a year !)

Comes in pairs.

49 €

Thermal tape

Here are 15 meters from thermal wrap, 5 cm wide, to bundle up your exhaust system and give you a look of BAD BOY.

For black color, we advise you to paint with a special high temperature painting, so the color can resist over the mounths.

It's a great quality part, beware of low-cost ones! Comes with 8 stainless steel collars.

59 €

Side number panel for Triumph Bonneville (since 2016)

Side number panel for Triumph Bonneville T120, Street Twin / Street Cup and T100 (since 2016) in brushed aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing. 

Available for Right or Left side, with the side cover in Brushed or Satin black finish.

127 €

Aluminium side covers for Triumph Street Twin / T120 / T100

Side covers for Triumph Bonneville T120, Street Twin / Street Cup and T100 (since 2016), made in aluminium. It replaces your original side covers to bring a strongest look to your motorcycle, using noble material.

Comes in pairs, with all the necessary screwing for left and right fixation. Available in brushed and satin black finish.

155 €

BAAK N°1 handlebars

Wide stailness steel handlebars. It's flatter, wider and has more pullback / sweep to the driver than other handlebars. It will offer a very distinguised look to your motorcycle, and improve its handling qualities. 

The stainless steel tubes we selected, very thin and resistant, make it a good quality handlebar.

95 €

BAAK N°1 Handlebar crossbar

Wide stainless steel handlebar with crossbar. It offers a very comfortable driving position and great handling. It's flatter, wider and has more pullback to the driver than other handlebars. Its central crossbar offers a nice scrambler look.  

The stainless steel tubes we selected, very thin and resistant, make it a good quality handlebar.

125 €

Flat track handlebar

Flat Track handlebar manufactured in steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. 

Available in 1 inch' (25,4mm) and 22mm diameter. It's 81cm wide and 13cm high.

69 €

Scroll To Top