Triumph

Showing 1-24 of 79 item(s)

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Side covers for Triumph Scrambler 1200 XC/XE in aluminium.Attaches to replace the original side covers of your Triumph 1200 XC or XE.

Triumph

Rear mudguard for Bobber 1200 Triumph

€495.00

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€198.00

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

Airbox removal kit for Triumph Bobber (2017)

Bonneville Bobber (2017 -...)

Airbox removal kit for Triumph Bobber (2017)

€225.00

This airbox removal kit for Triumph Bonneville Bobber (2017-...) enables you replaced the original plastic airbox by an elegant leather protection part and two air filters and a crankcase breather. The air filters and breather are available in polished, satin black and brushed version. Appart from the aesthetic aspect, this modification leads to a slight...

Plate holder for original Triumph Scrambler 1200 XC/XE mudguards

Parts

Plate holder for original Triumph Scrambler 1200 XC/XE mudguards

€0.00

More discreet than the original, this accessory is very easily fitted as a replacement for the original part, delivered with a plug & play harness. In the photos, the light and indicators are Triumph options.

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Parts

Leather Conditioner

€18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Aventures leather seat for Triumph Scrambler 1200 XE/XC

Parts

Aventures leather seat for Triumph Scrambler 1200 XE/XC

€915.00

Aventures Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE. Recommended height of the pilot: from 6,2 feet tall

Turn indicators wiring harness for Triumph (2016-...)

Parts

Turn indicators wiring harness for Triumph (2016)

€29.00

This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket...

Heritage leather seat for Triumph Scrambler 1200 XC/XE

Parts

Heritage leather seat for Triumph Scrambler 1200 XC/XE

€765.00

Heritage Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE.

Triumph

Long cables kit for Triumph (2016)

€84.00

Long cables kit for Triumph (2016-...), it enables to mount wide handlebars on your motorcycle. This kit includes the front brake hose extension and the clutch cable. We use it on most of our custom Triumph builds.

Triumph

Original turn indicators brackets kit for Triumph (2016)

€30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

License plate holder for Triumph Bobber original mudguard (2017)

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€199.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

Exhaust silencers for Triumph Bobber (2017)

Bonneville Bobber (2017 -...)

Exhaust silencers for Triumph Bobber (2017)

€765.00

Short exhaust silencers for Triumph Bobber 1200 (2017-...), designed and manufactured at our workshop in France. The stainless steel adapters connect to your catalytic converter (or X-Pipe). The mufflers are manufactured out of aluminium, and available in Brushed or Mat Black finish. This pair of silencers provides a rough and deep sound, without...

Classic Medium front mudguard for Triumph Bobber

Bonneville Bobber (2017 -...)

Classic Medium front mudguard for Triumph Bobber

€210.00

Classic Medium front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its mudguard fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for Triumph Bobber Black, Bobber TFC...

Triumph

Windscreen for Triumph 1200 Scrambler XE-XC

€96.00

You'll agree that on the Triumph Scrambler XE and XC, the rear part of the original speedometer lacks a refined finish... That's why we created this windscreen, available in brushed aluminum or satin black, both simple and elegant, specifically designed for this model. Our windscreen is specially designed to perfectly complement the original fenders of...

Classic mini front mudguard for Triumph Bobber

Bonneville Bobber (2017 -...)

Classic mini front mudguard for Triumph Bobber

€210.00

Classic Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't compatible with the models Bobber Black, Bobber TFC and...

Bonneville Bobber (2017 -...)

Mini front mudguard for Triumph Bobber

€210.00

Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled and comes with its fixation bracket so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for the...

Leather seat for Triumph Bobber 1200 (2017-...)

Bonneville Bobber (2017 -...)

Leather seat for Triumph Bobber

€600.00

Leather seat for Triumph Bonneville Bobber 1200 (2017-...). This seat has the same shape as your original one, and a perfect finish level thanks to the great quality leather we selected and its diamonds-shape quilting on the seating area. This seat is manufactured by our craftsmen at BAAK's workshop in France. It's available in Aged brown, Black, Gold...

Adjustable shock absorber for Triumph Bobber 1200 I BAAK

Bonneville Bobber (2017 -...)

Shock absorber for Triumph Bobber 1200

€420.00

Big Body shock absorber for Triumph Bobber 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only knob which adjust both compression and relaxation (48 different levels of setting) in a...

Triumph

Mini speedometer Tiny for Triumph (2016)

€1,230.00

Mini speedometer for Triumph (2016-... I Liquid-cooled). This tiny Plug & Play speedometer is THE solution to clear the cockpit of your Triumph while keeping the original features of your speedometer. It comes with a fixation bracket to mount it on one of your fork tube, or under the yokes if you already have one BAAK triple trees kit mounted on. The...

Triumph

Bates headlight / integrated speedometer for Triumph (2016)

€1,350.00

Bates headlight / integrated speedometer for Triumph (2016-... I Liquid-cooled). Inserted into a ø150mm diameter Bates lighthouse casing, this tiny Plug & Play speedometer is a simple solution to clear the cockpit of your Triumph while keeping the features of your original speedo. The speedometer is available in Classic or Vintage finish, the...

Rear fender removal kit Triumph 1200 Scrambler X-XE-XC

Parts

Rear fender removal kit Triumph 1200 Scrambler X-XE-XC

€210.00

Currently unavailable Do you want to streamline the rear of your Triumph 1200 Scrambler XC/XE/X? This fender eliminator with license plate holder allows you to completely remove the stock mudguard. Made of aluminum and stainless steel, the kit comes with an approved LED taillight and license plate lighting. A plug-and-play adapter harness makes...

View