Triumph

Showing 49-72 of 117 item(s)

Parts

Leather covered handlebar grips

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-15%

Parts

Motorcycle handlebar mounts, aluminum

€81.60 €96.00

Time left

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Time left

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

Stainless steel silencers for Triumph (pre- 2016)

Bonneville (2000-2016)

Stainless steel silencers for Triumph (pre- 2016)

€996.00

Pair of stainless steel exhaust mufflers for Triumph Bonneville (pre-2016 - air-cooled). These silencers are handcrafted in France. Available in chromed or brushed finish, it offers a deep and smooth sound. Not compliant with European regulations. Their sound is quite discreet (less than 100 Db). It's lighter than your original mufflers and will improve...

Triumph

Stainless steel silencers for Triumph T100-T120 (2016)

€1,095.00

Pair of stainless steel exhaust mufflers for Triumph Bonneville T100 / T120 (2016-... - liquid cooled). These silencers are manufactured in France. Available in Polished, Brushed or Matt black finish, it offers a deeper and smooth sound. Not compliant with European regulations. But It sounds quite discreet (less than 100 Db). Comes in pairs with all the...

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

Thruxton 1200 (2016 -...)

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

€996.00

Pair of stainless steel exhaust mufflers for Triumph Thruxton 1200 (liquid cooled). These silencers are manufactured in France and available in Polished or Brushed finish. It offers a deep and smooth sound. Not compliant with European regulations, but it sounds reasonably loud (less than 100 Db). It comes in pairs with all the necessary mounting hardware...

Rear turn indicators brackets for Triumph

-15%

Triumph

Rear turn indicators brackets for Triumph

€25.50 €30.00

Time left

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Rear turn indicators brackets for Triumph (pre- 2016)

-15%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€25.50 €30.00

Time left

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

View

Front turn indicators bracket for Triumph

-15%

Triumph

Front turn indicators bracket for Triumph

€25.50 €30.00

Time left

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Leather handlebar pad for motorcycle (black, brown, red, gold)

Leather handlebar pad for motorcycle (black, brown, red, gold) 2

-15%

Parts

Leather handlebar pad

€63.75 €75.00

Time left

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

Side speedometer holder for Triumph Street Twin / Street Scrambler

Side speedometer holder for Triumph Street Twin / Street Scrambler 2

-15%

Parts

Side speedometer holder for Triumph Street Twin / Street Scrambler

€75.65 €89.00

Time left

Side speedometer holder for Triumph Street Twin / speed Twin 900 / Street Scrambler. This part enables you to relocate your speedometer on the right or left of the ignition switch to visually lighten the front of your motorcycle. It mounts on the left or right fork tube.

Relocated ignition switch control bracket for Triumph (2016)

-15%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€25.50 €30.00

Time left

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-15%

Parts

License plate holder for US format side license plates

€38.25 €45.00

Time left

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

View

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

-15%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€41.65 €49.00

Time left

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

-15%

Triumph

Side license plate holder for Triumph

€80.75 €95.00

Time left

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according to...

License plate holder for Triumph Bobber original mudguard (2017)

License plate holder for Triumph Bobber original mudguard (2017) 2

-15%

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€153.00 €180.00

Time left

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

-15%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€41.65 €49.00

Time left

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

-15%

Triumph

Rectifier bracket for Triumph (2016)

€38.25 €45.00

Time left

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Rectifier bracket for Triumph (pre- 2016)

-15%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€25.50 €30.00

Time left

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

License plate holder triangle for Triumph Thruxton / Speed Twin 1200 2

-15%

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€46.75 €55.00

Time left

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

Triumph

Short Full Black exhaust Triumph (2016-...)

€1,680.00

Short Full Black Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (2016 to 2024 - liquid-cooled), featuring a matte black ceramic coating, designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep,...

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-15%

Parts

License plate holder for US format with light mount

€38.25 €45.00

Time left

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.