Parts » Triumph » Scrambler (Before 2016)

Engine protection // sump guard for Triumph

Aluminium engine protection / sump guard for Triumph, gives an aesthetic style to your motorcycle and a better protection to your engine. Available for Triumph Bonneville / Scrambler / Thruxton before 2016.

Easy to assemble, comes with stainless steel screws and installation instructions.

115 €

Monza gas cap

Monza gas tank cap. The legendary Monza cap will perfectly suit your gas tank thanks to our exclusive adapter. 

The full kit includes the gas cap, the seal, the necessary screwing and the adapter. This part is manufactured in aluminium, it's polished finish.

Beware of poor quality copies.

129 €

Beringer braking kit for Triumph

Beringer complete front braking kit for Triumph. This kit is composed of a radial 4 pistons caliper, a Classic disk, a clutch control and a master cylinder. It garantees an better braking feeling and an improved power during every braking action.
The quality of these elements assures a great look for your motorbike. It's possible to buy each element of the kit separately. 

420 €

Switch gear for Beringer levers on Triumph

Switch gear / controls for Beringer levers. These handlebar gears are designed to be assembled on Beringer brake and clutch levers for Triumph. Manufactured out of anodized machined aluminium, each controls includes a slide button (kill-switch and turn indicators) and 2 push buttons. 

The Beringer levers are not included. Available for classic Triumph before 2016 (air) and since 2016 (liquid).

335 €

Under handlebar mirror

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility with its wide angle glass.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually. Fit both left and right sides, available in satin black only. 

34 €

Leather fork gaiters + stainless steel collar

Pair of genuine leather fork gaiters. These 4, 6 or 8 folds fork gaiters are handmade in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. 

Diameter Ø41mm top and Ø63mm bottom, fits for Triumph Bonneville, Thruxton, Scrambler, Street Twin, T120 and Thruxton (except R version) and Moto Guzzi V7.

190 €

License plate support for Triumph original fender

License plate support with its tail light, for Triumph Bonneville - Scrambler - Thruxton (before 2016) original fender. Comes in place of the original block.

The mini turn signals are optional, it includes two pairs of turn signals, can be set in classic position or on the shock absorber axis. 

Designed and manufactured at our workshop in France.

150 €

Side license plate support for Triumph

Side license plate support / holder for Triumph Bonneville, Scrambler, Thruxton, Street Twin/ Street Cup, Street Scrambler, Bonneville T100 (from 2016) and T120.

Attaches to the upper axis of the left shock absorber. Comes with a connection wiring harness. 100% plug and play part, satin black powder coat painting finish.

95 €

Leather cell phone mount - Aged brown

Universal cell phone mount made out of leather. This tiny bag is design to be assembled on your motorcycle handlebar. It enables you watch and use your smartphone while riding has its front transparent surface is touch sensitive. It gets closed thanks to a velcro that makes it easy to connect the phone cable while riding.

Available in Aged brown, Black, Ruby or Gold genuine leather.

125 €

Aluminium side covers for Triumph

Side covers for Triumph, made in aluminium available in Brushed or satin black powder coated painting. It replaces your original side covers. These parts will bring a strongest look to your motorcycle, using noble material.

Comes in pairs, with left and right fixation. Designed and manufactured in our workshop in France.

125 €

Side number panel for Triumph (before 2016)

Side number panel for Triumph Bonneville, Scrambler and Thruxton (before 2016 - air cooled) in brushed aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing. 

Available for Right or Left side, with the side cover in Brushed or Satin black finish.

127 €

Mini speedometer for Triumph EFI - Below the handlebar fixation

Tiny speedometer manufactured by motogadget for Triumph Bonneville, Scrambler or Thruxton (before 2016). Mounted on a plate developed by BAAK Motorcycles, made in aluminium, epoxy  satin black painted.

Comes assembled and connected to a compatible wiring harness (plug and play).

Two locations available : Above the steering column (behind the handlebar) and classic position.

495 €

Cable speedometer for Triumph

Mini round speedometer for Triumph Bonneville / Scrambler / Thruxton carburators with cable speedometers and Triumph EFI up to 2011.

With neutral indicator, wiring harness, oil pressure and turn signals.

This speedometer comes with its plug & play wiring harness. Available in black only.

219 €

Shims short fork spring

Short fork spring blocks. To adapt our shorter shocks, and proportionally belittle the front of your Triumph Bonneville / Scrambler / Thruxton or Moto Guzzi V7 I and II sice 2013, you will need these fork springs blocks.

It comes simply replacing the original ones. It comes with installation instructions.

19 €

2win aluminum shock absorbers for Triumph

2 Win aluminium shock absorbers for Triumph Bonneville, Scrambler and Thruxton. These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation simultaneous manner.

The partner developed a short size version, to give a chunky look to your Triumph, without loosing comfort. Sold in pairs.

420 €

Removal Kit lambda sensors

Installation of this kit eliminates the lambda probes / sensors, to lure the injection system so your engine can provide more power, better engine rev increase and a more stable ticking over.

Fits the Triumph Bonneville T100 (2006 - ...), Scrambler, Thruxton, Thruxton 1200, Street Twin, Street Scrambler et T120.

59 €

Regulator - Turn signals - Horn support for Triumph

This bracket enables you to relocate your rectifier, front turn signals and horn below your steering column. Visually lightens the line of the front of your bike by grouping these parts on one support.

Fits with Triumph Bonneville (T100 / SE), Thruxton and scrambler, EFI or carburetor (2001 - 2016).

Manufactured in stainless steel at our workshop, satin black powder coat painted.

49 €

10mm headlight strut

Motorcycle headlight struts, made in aluminium, to perfectlly adjust the fixation of your headlight. The hole diameter is 8mm, the exterior diameter is 29mm.

For Moto Guzzi V7 headlight : 10mm

For Triumph headlight : 5mm

11 €

Front bracket flashing for Triumph

This turn signal bracket / support for Triumph (air-cooled and liquid-cooled models) is simple, effective and very discreet. It enables you relocate your Universal turn indicators under the steering column. Stainless steel laser cut and satin black powder coated.

Fits with the bracket regulator Triumph, or can be tightened on the superior fixation of the oil cooling system.

19 €

Rear turn signal support for Triumph

Rear turn signals support for Triumph. Simple, effective and very discreet.  Stainless steel bracket laser cut (3mm thick) and satin black powder coat painted.

Fits with any rear fender. Delivered without turn signals.

Suits the Triumph Bonneville, Scrambler and Thruxton before 2016.

22 €

Switch Bracket for Triumph

Switch / ignition bracket for Triumph. This simple switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits right side on the injection models (EFI).

It requires to move the wiring harness that is in your headlight, under the gas tank, without having to lengthen any electric cable. 

Aluminum, laser cut, satin black powder coat painted.

49 €

Rectifier bracket for Triumph

This bracket enables you to relocate the voltage rectifier, in place of the horn. The horn can be attached below, on the same bracket.

I's manufactured in aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank.

Suits the Triumph Bonneville, Thruxton and Scrambler (before 2016 - air cooled).

30 €

Oil temperature gauge Triumph

Oil temperature gauge, comes in place of the original oil filler cap. Allows you to monitor the oil temperature of your engine.

Fits with Triumph Bonneville, Thruxton, Scrambler, T120, T100 (from 2016) and Street Twin.

32 €

Rear turn signals brackets for Triumph

Rear turn signals bracket for Triumph Bonneville, Scrambler, Thruxton, Street Twin, T100 (from 2016) and T120.

Enables you to mount your turn signals on the shock absorber axis for a more discreet look. Compatible with the original passenger grab handle.
Flashing Axis ø10mm, shock absorber axis Ø14mm or Ø16mm, length 50mm.

Comes in pairs.

19 €

Mini LED turn signals

Mini LED turn signals in aluminium with Ø8mm shaft. These blinkers are minimalistic, once switched off, it's nearly invisible wether it offers a perfect visibility when running. We use it on main part of our custom motorcycles project at the workshop.

Sold in pairs. Blinkers size : 19,5mm x 16mm. 12V / 3W.

78 €

Mini round aluminum flashing.

Aluminium mini blinkers, 4cm diameter, 21W bulbs, made in aluminium.

Very nice finish, much more discreet than most of the original turn signals. We use it on the major part of our custom projects.

Sold in pairs. UE approved.

55 €

Mini Turn Signals

Mini blinkers. These small indicators are beautifully made and measures only 6cm long. They are bulbs indicators, classic and beautiful.

It's 21W bulbs blinkers.

Sold in pairs, it's an EU approved part.

19 €

Scroll To Top