Bonneville (2000-2016)

Showing 1-49 of 49 item(s)

Triumph

Big Body shock absorbers for Triumph (pre- 2016)

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Bonneville, Thruxton and Scrambler 865. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models...

Triumph

2Win shock absorbers for Triumph (pre-2016)

€466.00

2Win aluminum shock absorbers for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. If you choose a shorter set than the original one, we recommend you to also go for our...

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Aluminium side covers for Triumph (pre- 2016)

-35%

Triumph

Classic aluminum side covers for Triumph (pre- 2016)

€48.75 €75.00

Classic aluminum side covers for Triumph (before 2016 - air-cooled), available in Brushed or powder coated in Satin Black. It replaces your original plastic side covers. These parts will bring a strongest look to your motorcycle, using noble material while hiding the airbox. Comes with the necessary mounting bracket and hardware, available for right side...

Triumph

Rear mudguard wiring harness for Triumph

€19.00

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Classic rear mudguard for Triumph (pre- 2016)

-10%

Triumph

Classic rear mudguard for Triumph (pre- 2016)

€270.00 €300.00

Time left

Classic rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. Shorter than your original Triumph rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Classic Medium front mudguard for Triumph

-20%

Triumph

Classic Medium front mudguard for Triumph

€96.00 €120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

Short rear mudguard for Triumph (pre- 2016)

-20%

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€288.00 €360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

-20%

Triumph

Mini front mudguard for Triumph

€132.00 €165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Scrambler high front mudguard for Triumph Bonneville, Thruxton and Scrambler (pre-2016)

-20%

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€228.00 €285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

Front mudguard for Triumph Bonneville (pre- 2016)

Bonneville (2000-2016)

Front mudguard for Triumph Bonneville (pre- 2016)

€165.00

Long and narrow front mudguard for Triumph Bonneville (pre-2016 - air-cooled). It's the narrowest front fender which enables you keep the original metal fixation legs. It's a stainless steel front fender, designed and manufactured in France at BAAK's workshop. It enables to keep a classic look and a good protection against the wheel projections. It's...

Triumph

Short leather seat kit for Triumph (pre- 2016)

€1,290.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

Triumph

Bates headlight / integrated speedometer for Triumph (pre-2016)

€650.00

Bates headlight with integrated motogadget Tiny speedometer for Triumph (pre-2016 – air-cooled) Integrated into the housing of a ø150mm Bates headlight, this headlight with integrated speedometer is a Plug & Play solution to streamline your cockpit while keeping the functions of your original speedometer. This speedometer comes in a plug & play...

Front mudguard fixation brackets for Triumph (pre- 2016)

-40%

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€27.00 €45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Triumph

Classic Headlight / Integrated Speedometer for Triumph (pre-2016)

€840.00

Classic headlight with integrated speedometer for Triumph (before 2016 – air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal headlight with M8 side mounts, is the ideal way to visually lighten the front of your bike while retaining advanced speedometer functionalities. This speedometer is offered in a plug & play version,...

Bates headlight plate for Triumph (pre-2016)

-30%

Triumph

Bates headlight plate for Triumph (pre-2016)

€118.30 €169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Engine protection for Triumph (pre-2016)

-35%

Triumph

Engine protection for Triumph (pre-2016)

€74.75 €115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

Triumph

Side number panel for Triumph (pre- 2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish....

View

Rear turn indicators brackets for Triumph

-35%

Triumph

Rear turn indicators brackets for Triumph

€19.50 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Rear turn indicators brackets for Triumph (pre- 2016)

-35%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€19.50 €30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Front turn indicators bracket for Triumph

-35%

Triumph

Front turn indicators bracket for Triumph

€19.50 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

-35%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€31.85 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

-30%

Triumph

Side license plate holder for Triumph

€66.50 €95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according to...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

-30%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€34.30 €49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rectifier bracket for Triumph (pre- 2016)

-35%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€19.50 €30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

-20%

Triumph

Classic Mini front mudguard for Triumph

€86.40 €108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

21W turn indicators bulbs

209-405

€9.00

Transparent Mini Turn indicators bulbs, 21W, 12V. Comes in pair.

Parts

Exhaust wrap

€93.60

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

-15%

Parts

Short fork spring blocks

€16.15 €19.00

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

€24.00

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

-15%

Parts

Bates headlight

€63.75 €75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

-15%

Parts

Heritage headlight

€84.15 €99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

-15%

Parts

Classic headlight

€76.50 €90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

-15%

Parts

Headlight bulb wiring extension

€16.15 €19.00

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

-15%

Parts

Resistors for LED turn indicators

€12.75 €15.00

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

€18.00 €30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

-15%

Parts

License plate lightning

€15.30 €18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-35%

Parts

Universal short headlight clamps for classic motorcycles

€83.85 €129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

€29.25 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

-15%

Universal

Universal handlebars controls kit

€168.30 €198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

€29.25 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Parts

Turn indicators / Brake light

€156.00

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

Bouchon plat de réservoir pour triumph 2

-30%

Parts

Flat fuel tank cap for Triumph

€40.60 €58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.