Thruxton 1200 (2016 -...)

Showing 1-36 of 46 item(s)

Triumph

Monza gas cap for Triumph

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Turn indicators wiring harness for Triumph (2016-...)

Parts

Turn indicators wiring harness for Triumph (2016)

€29.00

This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket...

Triumph

Rear mudguard wiring harness for Triumph

€19.00

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

-35%

Triumph

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

€16.25 €25.00

Bates headlight fixation bracket for Triumph Thruxton 1200 and Speed Twin. This bracket fits the lower fork triple trees of the Thruxton 1200 / Speed Twin and enables you mount any Bates headlight with a lower fixation on your motorcycle. Distance between the fixation holes axis : 113mm. 4mm thick machined aluminium. Satin black powder coat painting.

Triumph

Long cables kit for Triumph (2016)

€84.00

Long cables kit for Triumph (2016-...), it enables to mount wide handlebars on your motorcycle. This kit includes the front brake hose extension and the clutch cable. We use it on most of our custom Triumph builds.

Original turn indicators brackets kit for Triumph (2016)

-35%

Triumph

Original turn indicators brackets kit for Triumph (2016)

€19.50 €30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

Triumph

Short exhaust for Triumph (2016-2024)

€1,200.00

Short Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016, liquid-cooled), designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep, resonance-free sound that is not too loud. It is easy to install,...

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

Thruxton 1200 (2016 -...)

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

€996.00

Pair of stainless steel exhaust mufflers for Triumph Thruxton 1200 (liquid cooled). These silencers are manufactured in France and available in Polished or Brushed finish. It offers a deep and smooth sound. Not compliant with European regulations, but it sounds reasonably loud (less than 100 Db). It comes in pairs with all the necessary mounting hardware...

Front turn indicators bracket for Triumph

-35%

Triumph

Front turn indicators bracket for Triumph

€19.50 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Relocated ignition switch control bracket for Triumph (2016)

-35%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€19.50 €30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Triumph

Short Full Black exhaust Triumph (2016-...)

€1,680.00

Short Full Black Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (2016 to 2024 - liquid-cooled), featuring a matte black ceramic coating, designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep,...

Headlight plate for Bates Headlight for Triumph (2016-...)

-30%

Triumph

Bates headlight plate for Triumph (2016)

€118.30 €169.00

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

Triumph

Bates headlight / integrated speedometer for Triumph (2016-...)

€1,350.00

Bates headlight / integrated speedometer for Triumph (2016-... / Liquid cooling) Integrated into the housing of a ø150mm Bates headlight, this motogadget Tiny Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while retaining the information from your original speedometer. The assembly is delivered pre-wired, with...

Triumph

Classic Headlight / Integrated Speedometer for Triumph (2016–...)

€1,500.00

Classic Headlight / Integrated Speedometer for Triumph (2016–... – Liquid-cooled) Integrated into the housing of a ø180mm Classic headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while keeping the original information display and ensuring optimal readability. The speedometer...

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

Exhaust wrap

€93.60

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

€24.00

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Parts

Universal 1 button control

€200.00

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

-40%

Parts

Leather cable guides

€4.80 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

-15%

Parts

Bates headlight

€63.75 €75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

Headlight brackets for original headlight for Triumph (2016 )

-40%

Triumph

Headlight brackets for original headlight for Triumph (2016 )

€77.40 €129.00

Headlight fixation brackets for Triumph original headlight (since 2016). This pair of lighthouse brackets come to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights. The optional turn indicators brackets enable mount on the headlight...

Parts

Biltwell Renegade handlebars grips

€22.00

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

-15%

Parts

Heritage headlight

€84.15 €99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

Parts

Biltwell Thruster handlebars grips

€22.00

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

Parts

Leather covered handlebar grips

€145.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-40%

Parts

Motorcycle handlebar mounts, aluminum

€57.60 €96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

-15%

Parts

Classic headlight

€76.50 €90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

-15%

Parts

Headlight bulb wiring extension

€16.15 €19.00

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

€54.40 €64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€18.70 €22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

€18.00 €30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

-15%

Parts

License plate lightning

€15.30 €18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.