Bonneville T120 (2016 -...)

Showing 1-116 of 116 item(s)

Kit Empreinte Triumph Bonneville T100/T120 | BAAK Motorcyclettes

Kit Empreinte Triumph Bonneville T100/T120 | BAAK Motorcyclettes 2

Kit Empreinte — Triumph T100 / T120

The hand-crafted leather saddlebag. The full-grain flat leather saddle. And the full Kit Caractère as a foundation. This is a statement.

View

Kit Caractère Triumph Bonneville T100/T120 | BAAK Motorcyclettes

Kit Caractère Triumph Bonneville T100/T120 | BAAK Motorcyclettes 2

Bonneville T120 (2016 -...)

Kit Caractère — Triumph T100 / T120

KIT-T100-CARAC

€1,295.00

The Bates ø150mm headlight. Natural leather fork gaiters. The hand-crafted tank strap. The BAAK handlebar. Here, the Triumph changes register.

View

Kit Allure Triumph Bonneville T100/T120 | BAAK Motorcyclettes

Kit Allure Triumph Bonneville T100/T120 | BAAK Motorcyclettes 2

Bonneville T120 (2016 -...)

Kit Allure — Triumph T100 / T120

KIT-T100-ALLURE

€719.00

The line, plus the low protection and the detail that changes the look. Four parts that hold together.

View

Kit Ligne Triumph Bonneville T100/T120 | BAAK Motorcyclettes

Kit Ligne Triumph Bonneville T100/T120 | BAAK Motorcyclettes 2

Bonneville T120 (2016 -...)

Kit Ligne — Triumph T100 / T120

KIT-T100-LIGNE

€529.00

Two parts to draw the line. The Triumph Bonneville T100/T120 already has what it takes — the Kit Ligne doesn't hide it, it affirms it.

View

Parts

Waterproof seat cover

€25.00

This cover has been designed to protect your Baak leather seat or your original seat from rain and external elements when your motorcycle is parked. Waterproof, resistant to UV, heat and cold, it can be easily stored in its included carry bag and takes up very little space once folded. A subtle tone-on-tone Baak logo decorates the cover. Do not ride...

Triumph

Leather tank strap for Triumph (after 2016)

€126.00

Leather tank strap for Triumph Speed Twin 1200, Triumph Street Twin / Street Cup, Triumph Bonneville T120 / T100 (post-2016), Triumph 1200 Bobber, Triumph Street Scrambler.This strap is designed for tanks with an offset side filler cap. It dresses your tank and gives it a refined look while protecting it from scratches. Adjustable with a metal tightening...

View

Triumph

Complete oil change and service kit for Triumph (after 2016)

€65.50

Take care of your engine with this customizable service kit. The base kit includes a 4‑litre can of oil, an oil filter and a drain plug crush washer. You can also choose to add spark plugs and an air filter if needed, to service your Triumph as it deserves. Compatibility: This reference is compatible with the entire neo‑retro 900 and 1200 range from...

View

Triumph

Spark plugs for Triumph (after 2016)

€33.00

NGK spark plugs LMAR8A-9 original-type for Triumph (after 2016). Designed to withstand the demanding thermal conditions of high-performance engines, they deliver a stable and powerful spark. These spark plugs are sold in pairs. Manufacturer recommendations: Inspection and cleaning: Every 16,000 km Replacement: Every 32,000 km or every 4 years...

Triumph

Air filter for Triumph (after 2016)

€17.40

Think about maintaining your Triumph! The air filter HFA 6509 is designed to provide optimal filtration and airflow. This filter is the direct, cost-effective replacement for the Triumph part reference T2201057. Hiflofiltro is the only filter manufacturer in the world to have obtained TÜV approval, guaranteeing a level of protection and performance equal...

Universal Round LED Turn Signals in Aluminum - BAAK

Universal Round LED Turn Signals in Aluminum - BAAK 2

Parts

Turn signals Round - LED 5W version

€89.00

Discover our Round turn signals in LED version. Made from aluminum with a 40mm diameter, 5W LED bulbs and an M10 mounting stem. These universal turn signals feature a very fine finish, they are small enough to be discreet and elegant, yet large enough to deliver a vintage look perfectly neo-retro. This LED version provides compatibility with the...

Triumph

Rear fender Classic bare for Triumph (after 2016)

€189.00

This Classic rear fender is delivered in a bare version: without accessories, to give you complete freedom in customizing your motorcycle. It is made of stainless steel, and its design with a <strong=sculpted end gives it a raw and elegant classic look. It provides good protection against spray from the rear wheel. The integrated mounting holes and...

View

PRE-ORDER - Baak Heritage windscreen for Triumph

On sale!

Triumph

PRE-ORDER - Baak Heritage windscreen for Triumph

€129.00

🔥 Pre-order your BAAK Heritage flyscreen for Triumph post-2016 and benefit from a special 20% pre-order discount off the retail price. ⏳ Limited to 10 pre-orders! 📦 Delivery scheduled for October 2026. Be among the first to fit this Heritage flyscreen to your motorcycle! Its clean, elegant design adds a subtly vintage touch without overdoing it. It...

View

Triumph

Grille for original Triumph T100-T120 headlight

€90.00

This 3 mm stainless steel headlight grille provides excellent protection for your headlight while giving your motorcycle a unique style. It was designed to fit perfectly on your original headlight and is compatible with your original headlight tabs as well as Baak headlight tabs. It is coated with a satin black epoxy paint that is ultra-resistant to...

Parts

Old School sticker sheet

€9.00

Printed on a UV-resistant vinyl, these Old School stickers are ready to withstand rain, heat and long journeys! Each design is precisely cut, with a glossy finish on a white background.Fairing, helmet, tank or toolbox, whatever the place, it sticks, it holds, and it tells a story. It’s a tribute to garage culture, to beautiful, authentic machines, and...

View

Front and rear fender pack for Triumph (2016-...)

Pack

Triumph

Headlight Bates kit + Headlight mounting plate for Triumph (after 2016)

€340.00

BAAK offers a plug-and-play headlight pack for a complete installation. This pack includes: - A Bates front headlight and its mounting plate - A plug-and-play wiring harness for your Triumph model - Bates headlight plate for Triumph (2016-...) - A front turn signal bracket - A key switch bracket if your fork yoke is original EU approved

View

Triumph

Classic headlight kit + Headlight brackets for Triumph (after 2016)

€243.00

BAAK offers a plug-and-play headlight pack for a complete installation. This pack includes: - A Classic front headlight ø180mm - A plug-and-play wiring harness matched to your Triumph model - Headlight brackets (Clamps Ø41-42 - bracket length: 60mm) - Optional turn signal brackets EU approved

View

Front and rear fender kit for Triumph Bonneville (2016-...)

-20%
Pack

Triumph

Front and rear Classic fender kit for Triumph (post-2016)

€336.00 €420.00

Time left

Designed to give your Triumph a retro and premium look while improving usability, this Classique fender pack brings a more balanced silhouette, timeless style and meticulous finishing details.Made from stainless steel, the front and rear fenders combine strength, durability and elegance, while effectively protecting against road spray. This complete pack...

View

Triumph

Triangle side covers for Triumph (after 2016)

€75.00

Give your Triumph a stronger character with these aluminum side covers. They replace the original plastic covers and neatly conceal the airbox, while reinforcing your bike’s classic styling. These covers are sold individually (right or left side) and come with all necessary mounting hardware.Compatible with Triumph T100 / T120 Bonneville models...

View

Triumph

Performance OEM-style air filter for Triumph (after 2016) - Green Filter

€65.00

Optimize your motorcycle’s performance with this Green filter sports air filter, made from double-layer oiled cotton for higher airflow and optimal filtration. Simple maintenance with the Green filter kit (optional). Easy fit: directly replaces the OEM filterMore power, more torque, lower fuel consumptionWashable and reusable for lifeMade in France

"Camembert" air filters Triumph (After 2016)

Parts

"Camembert" air filters Triumph (After 2016)

€98.00

Round "Camembert" air filters. This pair of air filters will give your machine a retro look while maintaining perfect filtration quality. Filter inlet: ø53.5mm Filter: ø139mm / thickness 41mm Supplied as a pair, with two stainless steel mounting clamps. These filters are only compatible with the Triumph Bonneville T120.

Parts

Mini turn signal LED mo.blaze Pin

€54.00

Mini motogadget LED turn signal 3W minimalist aluminium turn signal with an Ø8mm mounting stem. When off, these turn signals are almost invisible, while providing ideal brightness in operation. We use them on the majority of our custom projects. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your...

View

Universal

Micro turn signal LED mo.blaze Tens1

€49.42

Micro motogadget LED turn signal minimalist aluminum unit with Ø8mm mounting stem. The motogadget mo.blaze tens is one of the smallest certified turn signals in the world. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Finish choice in Black or polished Aluminum finish. Turn signal...

View

Beringer Classic front brake disc for Triumph (after 2016)

Home

Beringer Classic front brake disc for Triumph (after 2016)

€492.00

Front Beringer Classic brake disc for Triumph (2016-…). These discs will give your front wheel a more aesthetic and elegant look while reducing weight thanks to the aluminum carrier. Sold individually – allow 2 units for a twin front disc brake. Warning: returns are not accepted on Beringer products.

Parts

Universal VANS 25.4mm handlebar grips

€28.80

Vans handlebar grips right and left, for motorcycles. Featuring Vans® classic waffle sole pattern embossed and constructed from ODI's exclusive grip compounds. For 25.4mm (1 inch) diameter handlebars — also available below in ø22. Supplied in pairs.

View

rear fender removal kit Triumph 2016-...

rear fender removal kit Triumph 2016-... 2

Parts

rear fender removal kit Triumph (after 2016)

€240.00

Do you want to clean up the rear of your Triumph Bonneville T100/T120, ST900 or Scrambler 900? This fender eliminator with license plate bracket lets you completely remove the original fender. Made from aluminium and stainless steel, the kit is supplied with a road-legal LED taillight and license plate illumination. A plug&play adaptation wiring...

View

Accessory bracket for 41mm fork tube - Universal

Accessory bracket for 41mm fork tube - Universal 2

-20%

Parts

Accessory bracket for 41mm fork tube - Universal

€36.00 €45.00

Time left

This aluminum bracket mounts to your original fork tube to allow you to attach accessories such as a speedometer, GPS, switch, etc. Compatible with all ø41mm forks. M8 thread.

-20%

Triumph

Rear brake caliper protector Triumph

€28.80 €36.00

Time left

Protect your rear brake caliper with this stainless-steel guard specially designed for Triumph motorcycles. The rear caliper on your Triumph sits below the wheel axle and is therefore highly exposed to stone impacts off-road and to curbs in town. This caliper guard is specifically shaped to cover the caliper and reduce the risk of damage from impacts....

View

-20%

Home

Universal reflector for license plate

€7.92 €9.90

Time left

Black finish, mounts on license plate bracket or directly on the license plate.

Parts

Flat tank cap for Triumph

€58.00

Finish in black only, without a locking system. Made with a black anodized treatment for lasting durability and impeccable style. This product has been carefully selected by the BAAK workshop team for its elegant aesthetic and superior quality. It installs easily as a direct replacement for the original cap.

Classic ø10 round motorcycle mirror in aluminum, long stem

Classic ø10 round motorcycle mirror in aluminum, long stem 2

Parts

Classic round motorcycle mirror ø10 long stem

€66.00

The HIGHSIDER Pro MONTANA XL round motorcycle mirror combines elegance and practicality with a timeless design. Its black anodized finish, paired with a 175 mm articulated stem, provides improved rear visibility. Designed to enhance ergonomics and ensure a minimalist look, it fits vintage and custom motorcycles perfectly. Certified to European CE (E9)...

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish 2

Parts

LED motorcycle turn signals type Bullet black/brushed bezel

€78.00

Round LED 10W motorcycle turn signals, Bullet-style in black aluminum with brushed trim, simply beautiful. With a clear lens, they measure 20 mm in diameter and 36.5 mm in length. They install easily using a screw mounting (M8mm) and are compatible with a 12 V system. Delivered sleeved and with crimped Japanese round terminals ø3.2mm Approved to CE...

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Bar-end mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

The elegance of discretion. Designed for lovers of pure lines, this mirror in aluminum stands out for its profile of absolute thinness (only 5 mm thick). Its short stem and satin black finish allow it to blend with total sobriety on the handlebars of a Café Racer, a Scrambler or a characterful classic. A distinguished accessory that knows how to...

Triumph

Removable windscreen for Triumph Bonneville T100 / T120

€816.00

Equip your Triumph Bonneville T100/T120 with this removable retro-touring windscreen kit. It takes 2 seconds to remove without tools.It includes a removable windscreen and its fittings, as well as headlight brackets matched to the original model. This windscreen is compatible with the original headlight or any other ø180mm headlight, notably our phare...

View

With bracket for relocated switch only 2

Parts

Flat triple clamp for Triumph T100/T120

€600.00

Transform your Triumph T100/T120 with this flat machined-aluminium triple clamp. Satin black finish thanks to a high-quality epoxy paint, and supplied with a pair of risers of your choice. This triple clamp lowers your motorcycle by 25mm at the front, so it is recommended to adjust your shocks or choose our lowering kit. It is also compatible with the...

View

Plug and play headlight for Triumph (2016...)

Plug and play headlight for Triumph (2016...) 2

Parts

Front headlight parking/position light plug-and-play for Triumph (after 2016)

€27.00

Want to customize your Triumph (2016 and up) without the hassle? The plug-and-play front headlight pilot light is here for that. With its connector perfectly compatible with the original wiring harness, you can install an aftermarket front headlight in no time. Whether for a café racer, scrambler or bobber project, this pilot light gives you a simple,...

Mini speedometer Daytona for Triumph (2016-...)

Mini speedometer Daytona for Triumph (2016-...) 2

Parts

Mini speedometer Daytona for Triumph (after 2016)

€966.00

Daytona mini speedometer for Triumph The 60mm Daytona mini speedometer mounts on the original clamps of modern Triumphs (2016-...): T120, T100, Speed Twin 900, Scrambler 900 It is a 100% plug & play accessory, it includes a bracket, the necessary fasteners as well as a multiplexing module. Pre-wired in our workshop, it installs easily without...

View

Triumph

Radiator protection grille for Triumph (after 2016)

€84.00

Protect the radiator of your Triumph (2016-...) with this stainless steel grille coated in high-quality satin black epoxy paint. Designed to last, it provides optimal protection without compromising engine cooling. Supplied with stainless steel fittings. This water radiator guard is compatible with the following models: Triumph Bonneville T100...

View

Bracket for large leather saddlebag for short-seat kit Triumph (after 2016)

Bracket for large leather saddlebag for short-seat kit Triumph (after 2016) 2

-20%

Home

Bracket for large leather saddlebag for short-seat kit Triumph (after 2016)

€192.00 €240.00

Time left

Designed for our large removable leather saddlebags rolled or satchel-style, this bracket is compatible with our Triumph short seat kit (2016-...) This bracket only meets the need to be able to fit one or two large leather saddlebags if you have a BAAK short seat kit.We have of course designed it so the saddlebag does not interfere with the passenger....

View

Triumph

Exhaust silencers for Triumph OEM headers (post-2016)

€660.00

This pair of exhaust silencers delivers a perfect sound. With a tone neither too resonant nor too muffled, you will rediscover your Triumph while shedding several kilos. Made from aluminium in our workshop in France, this is a very small artisan serial production. You won't see them on every motorcycle... Installation is very simple and fits directly onto...

View

Parts

Large rolled leather saddlebag

€897.00

Large rolled leather saddlebag, carefully handmade by our craftsmen. Highly detailed, this fine leatherwork piece is made with BAAK leathers and suede. The rolled saddlebag is compatible with ALL SW‑Motech SLC side brackets (motorcycle bracket not included). For everyday use or for your holidays. Available in Brown or Black finish, according to your...

View

Parts

Large satchel-style leather saddlebag

€897.00

Discover our removable satchel-style leather saddlebag, an exceptional piece hand-crafted by our French artisans. Every detail is meticulously executed, reflecting our commitment to quality. This sublime leatherwork creation is made from BAAK vegetable-tanned leathers of the highest quality. The rolled saddlebag is compatible with ALL SW-Motech SLC side...

View

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi 2

Parts

Turn Signals + Brake Light 3-in-1 - Full Black

€156.00

These elegant aluminium turn signals streamline your motorcycle. The rear turn signals integrate brake lights and position lights. The front turn signals are classic and only provide the turn signal function. Powerful lighting. Stem M8 ø, 38mm long, 22mm ø lens.

View

US license plate bracket with license plate light bracket

US license plate bracket with license plate light bracket 2

-20%

Parts

US license plate bracket with license plate light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (horizontal) license plates. It is made from 3mm thick aluminum, finished in satin black epoxy paint. This bracket allows mounting a license plate light. It is mandatory to purchase one of our license plate brackets offered by BAAK.

Engine guard BAAK for Triumph T100/ T120

Engine guard BAAK for Triumph T100/ T120 2

-20%

Parts

Engine guard TRAIL for Triumph T100/ T120

€116.00 €145.00

Time left

Aluminum engine guard Trail for Triumph T100/T120 (2016-…) with an adventurer look for the best protection.

Parts

BAAK replacement silencer

€588.00

BAAK replacement exhaust silencers are sold in pairs with mounting brackets and bolts. Select your motorcycle model and we will craft these silencers to fit perfectly with BAAK headers. The muted tone remains the same, the finish matched.

View

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal dual-headlight headlight fairing draws its inspiration from 1980s trail bikes. Ideal for a Scrambler project, this fairing is designed by us and made from fiberglass. It includes an extension of the wiring harness and aluminum mounting brackets that attach to the fork tubes (ø39 - ø40mm / ø41 - ø42mm / ø43mm optional).We offer it in a raw...

View

License plate bracket for US side-mounted plate

License plate bracket for US side-mounted plate 2

-20%

Parts

License plate bracket for US side license plate

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (vertical) license plates mounted in a side position. It is made from 3mm-thick aluminum, painted with satin black epoxy paint. It is essential to purchase one of our BAAK side license plate brackets.

Triumph

Brembo brake pads for Triumph

€51.80

Front brake pads Brembo for Triumph. Softer than the original, these front brake pads made from quality materials will ensure consistently reliable braking, both cold and at high temperatures. The friction coefficient is higher than your original pads, which provides excellent braking performance and increased safety on the road. The kit includes 2 pads...

BAAK leather dye, ideal for motorcycle seats

Parts

Leather dye

€24.00

This leather coloring cream is a maintenance solution. It penetrates the leather and restores a deep black tone. You can use it for your seats but also for any other leather product: shoes, jackets, gloves, leather saddlebags, etc. Contents: 200 ml. Available for Black, Brown, Gold leather.Apply with a cloth, mixed with our maintenance cream (30% dye...

View

Leather handlebar grip pad (black, brown, gold, red) for motorcycle

Leather handlebar grip pad (black, brown, gold, red) for motorcycle 2

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Beyond the protection it provides in case of impact with your handlebar, this pad and its leather cover will give a more refined look to the front of your machine. Our craftsmen reinterpret the codes of off-road handlebar pads here to give them an aesthetic use. The inner diameter that contacts the crossbar is ø12mm, the...

View

Airbox removal kit for Triumph T120 (after 2016)

Airbox removal kit for Triumph T120 (after 2016) 2

-20%

Bonneville T120 (2016 -...)

Airbox removal kit for Triumph T120 (after 2016)

€224.00 €280.00

Time left

Airbox deletion kit for Triumph Bonneville T120 (2016-...). This kit cleans up the lines of your machine and frees the engine constrained by the very heavy original airbox. This kit includes: The battery tray in aluminium (Satin Black only) The pair of "camembert" air filters The pair of aluminium side covers (Black or Brushed) with or without leather...

View

-20%

Triumph

Classic Mini front fender for Triumph

€86.40 €108.00

Time left

Front Classic Mini Fender for Triumph, made from stainless steel. The mouldings at its ends give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. You can reuse the original fasteners. This Front Classic fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France....

View

Black aluminum headlight stays for motorcycle - BAAK

Black aluminum headlight stays for motorcycle - BAAK 2

Universal

Short universal headlight brackets for classic motorcycles

€129.00

Motorcycle headlight brackets, for M8 side-mounted headlight attachment, with optional turn signal mounts. Designed and manufactured in our BAAK workshop in France. Ideal for fitting a BAAK headlight and slimming the profile of your machine. Ø39 to 40mm and length 60mm for Moto Guzzi V7 I and II Ø41 to 42mm and length 50mm for Triumph Bonneville T100,...

View

Parts

Universal license plate lighting

€18.00

LED license plate light. This license plate light is approved to European ECE standards (12V / 2W). We use it on some of the license plate brackets manufactured at the BAAK workshop. License plate light dimensions: Length 17mm Diameter 12mm Mounting stem øM8.

Aluminum turn signal brackets for license plate bracket

Aluminum turn signal brackets for license plate bracket 2

Parts

Turn signal brackets on license-plate bracket - Universal

€30.00

Turn signal brackets for license plate mount. These stainless steel turn signal mounting plates attach to your BAAK license plate bracket on the motorcycle of your choice. They are available in 3 versions: For turn signals with øM8 stem For turn signals with øM10 stem For original/accessory Triumph turn signals (2016-...) Supplied with stainless steel...

View

Triumph

Classic headlight with integrated gauge for Triumph (after 2016)

€1,500.00

Classic Headlight / Integrated Speedometer for Triumph Integrated into the nacelle of a Classic ø180mm headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to tidy the cockpit of your Triumph while retaining the information from your original instrument and ensuring optimal readability. The speedometer dial is available...

View

Triumph

Bates headlight with integrated speedo for Triumph (after 2016)

€1,350.00

Bates headlight / integrated speedometer for Triumph Integrated into a Bates housing ø150mm, this motogadget Tiny Plug & Play speedometer is a simple solution to clean up the cockpit of your Triumph while keeping the information from your original instrument. The assembly is delivered pre-wired, with its multiplexing box, its wiring harness, and its...

View

Triumph

Motogadget Tiny speedometer for Triumph (after 2016)

€1,230.00

Mini speedometer for Triumph This Mini speedometer Plug & Play is THE solution to streamline the cockpit of your Triumph while retaining the information from your original speedometer.This speedometer is supplied with mounting plates for installation on one of the fork tubes, or under the upper triple clamp (if you have a BAAK triple clamp). Gauge...

View

Headlight plate for Bates headlight Triumph (2016-...)

-20%

Triumph

Headlight plate for Bates Triumph (after 2016)

€135.20 €169.00

Time left

Bates headlight plate for Triumph (from 2016 - liquid cooled). This aluminum plate neatly conceals the steering stem and cables after fitting a Bates front headlight to your machine. Its 4 leather fastening straps in black, brown, chocolate or gold hold it to your fork tubes. Available in satin black and brushed aluminum finishes, for OEM triple clamps or...

View

High front fender Scrambler for Triumph (2016-...)

-20%

Triumph

Front fender Scrambler for Triumph (after 2016)

€228.00 €285.00

Time left

High front fender Scrambler for Triumph (2016-... liquid-cooled). Handmade, this stainless steel high front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in finishes Glossy black varnish, Satin black, Brushed, Polished,...

View

Short Full Black exhaust line for Triumph (after 2016)

-10%

Triumph

Short Full Black exhaust line for Triumph (after 2016)

€1,512.00 €1,680.00

Time left

Short Full Black exhaust system for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016 to 2024 - liquid cooled), with matte black ceramic finish, designed and manufactured in our workshops. The headers are stainless steel and the silencers are aluminum. This system delivers a deep sound without resonance and...

View

Extension for Classic round motorcycle mirror ø10

Parts

Extension for Classic round motorcycle mirror ø10

€22.00

Aluminum extension for Classic round Mirror. This extension, compatible only with our Classic round Mirror, allows you to lengthen the mirror stem for improved rear visibility and offers greater adjustment options. It has the same finish as the mirror stem. This extension measures 55mm in length (center-to-center = 35mm). Sold individually.

Triumph

Regulator bracket for Triumph (after 2016)

€45.00

Regulator bracket plate for Triumph (2016-...). This bracket allows you to relocate your regulator behind the radiator rather than on the upper triple clamp to visually streamline your machine. Made from stainless steel, laser-cut. Its installation requires relocating your wiring harness under the tank. Supplied without regulator, with the necessary...

Triumph

Side license plate bracket for Triumph

€95.00

Side-mounted license plate holder for Triumph. This aluminium license plate holder mounts to the upper left shock absorber mount. Supplied with a plug-and-play wiring harness, making the accessory easy to install. Finished in satin black epoxy paint. You can optionally choose turn signal brackets mounted on the shock absorber mounts. License plate...

View

Parts

Bates headlight bracket

€30.00

Bates headlight mounting bracket, essential for fitting a lower-mounted front headlight. Made from 4mm thick aluminium. Supplied with stainless steel fasteners. Ø6mm mounting hole centers from 68mm to 95mm Bates headlight mounting Ø10mm

Ignition switch relocator for Triumph (after 2016)

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

Triumph

Front turn signal bracket for Triumph

€30.00

Front turn signal bracket for Triumph, simple, effective and above all very discreet. Made of laser-cut stainless steel and painted in satin black epoxy. Matches our Regulator bracket for Triumph, or can be bolted to the upper mount of your oil cooler. This bracket is compatible with classic Triumphs older models (pre-2016) and newer models (2016-...)....

Triumph

Rear turn signal bracket for Triumph (on shock absorber studs)

€30.00

Rear turn signal brackets for Triumph. This pair of brackets allows you to mount your turn signals on the upper shock axle for a more discreet look. Compatible with your Triumph's original passenger handle. Please select the correct motorcycle model to receive brackets adapted to your shock axle. Length 50mm. Supplied in pairs.

View

Parts

Fork gaiters in leather

€240.00

Pair of genuine leather fork gaiters. Handmade in France, they bring a touch of authenticity and distinction to your machine. These 4-, 5-, 6- or 8-pleat gaiters are water-repellent and specially treated to withstand intensive use. Available in several leather finishes. Diameter Ø41mm at the top and Ø63mm at the bottom. Supplied as a pair, with four...

View

Triumph

Exhaust silencer for Triumph T100-T120 (after 2016)

€1,110.00

Pair of stainless steel exhaust silencers for Triumph Bonneville T100 / T120 (2016-... - liquid cooled). Available in Polished or Brushed stainless finish, they deliver a deep, low tone without resonance. These silencers are not type-approved but their sound remains discreet (under 100 dB). Supplied in pairs with mounting system. Compatible with Triumph...

View

Triumph

Heritage leather seat for Triumph (after 2016)

€836.40

This Heritage leather seat transforms the look of your Triumph (2016 onwards) without compromising comfort. Narrower than the original seat (-2.5 cm), its slimmer, flatter profile enhances the motorcycle's lines while remaining comfortable, whether for daily commuting or long-distance rides. The double-tanned leather doesn't simply wear—it develops a...

View

Flat leather seat for Triumph (after 2016)

Parts

Flat leather seat for Triumph (after 2016)

€841.20

This flat café racer leather seat transforms the look of your Triumph (2016 onwards) without compromising comfort. Narrower than the original seat (-2.5 cm), it reshapes the bike's silhouette while remaining comfortable, from everyday commuting to long-distance rides. The double-tanned leather doesn't simply wear—it develops a rich patina over time. The...

View

Parts

Universal leather tank strap

€126.00

Universal leather tank strap suitable for tanks with an offset side filler cap. It dresses your tank to give it a refined look while protecting it from scratches. Adjustable with a metal tightening buckle, it wraps around the tank. Maximum length 190 cm, minimum length 107 cm. The leather strap is 55 mm wide. We use this strap on our Triumph Bonneville...

View

Triumph

Side cover with leather saddlebag for Triumph T100/T120, Street Twin, Street Scrambler,...

€273.00

Leather saddlebag for Triumph Bonneville T100/T120, Street Twin 900, Street Scrambler 900, Speed Twin 900 (2016-...). Add a touch of retro style and functionality to your Triumph with this leather saddlebag. Discreet and elegant, it allows you to carry a few personal items while integrating perfectly with your motorcycle's lines. Made from high-quality...

View

Parts

Mini universal leather saddlebag

€162.00

Mini universal leather saddlebag. Handcrafted in our workshop, it allows you to carry a few items while giving your machine a retro look. It is available in aged brown leather, gold, black or chocolate. It is particularly suitable for mounting on the original battery-side cover of Royal Enfield Classic / Bullet 500 (cover to be drilled). The rear is...

View

Parts

Medium universal leather saddlebag

€174.00

Universal Medium leather saddlebag. Handmade in our workshop, it allows you to carry a few items while giving your machine a retro look. It is available in aged brown leather, black, gold or ruby. The rear is pre-drilled with 4 holes (120mm spacing) to easily fit your motorcycle. Saddlebag dimensions: 20cm x 20cm x 7cm. Supplied with 4 M5x14...

View

Triumph

Engine guard for Triumph (after 2016)

€115.00

Engine guard made of stainless steel. It will give a bolder look to your Triumph (2016-...). With a thickness of 1.5mm, it provides good protection for your engine against impacts and debris thrown up by the front wheel. Available in satin black or brushed finish. Supplied with a screw kit for installation.

View

Mini under-handlebar round motorcycle mirror ø8 in steel

Mini under-handlebar round motorcycle mirror ø8 in steel 2

Parts

Round under-bar motorcycle mirror ø8

€45.00

Mini motorcycle mirror black steel Ø80mm specially designed to be mounted in the lower position, under your handlebar. It offers a discreet look and reliable visibility thanks to its wide-angle glass. Available Without adapter (for 8mm through-rod mounting) or with Adapter for 22mm handlebars. Sold individually.

View

Parts

Classic round motorcycle mirror ø10

€64.00

Round motorcycle mirror Classic in aluminum. This black mirror with a Ø10cm glass offers an impeccable finish while remaining discreet. It provides perfect rear visibility and fits any motorcycle. Adjustable in height thanks to its 150mm articulated stem. Supplied with two adapters (left-hand and right-hand thread M10x1.25 mm). Additional adapters...

View

Parts

Headlight wiring harness extension

€19.00

This headlight bulb extender is compatible with any motorcycle fitted with an H4 bulb. It allows you to reconnect your headlight to the machine if you relocate part of the original wiring harness. Length: 420mm. Handcrafted at the BAAK workshop. This extender is supplied by default with all headlights for Triumph, Moto Guzzi and Royal Enfield.

Triumph

Side cover with number plate for Triumph (after 2016)

€120.00

Side license plate holder for Triumph (2016-…) in aluminum. The brushed number plate is mounted on an aluminum side cover that replaces the original cover, delivered with all necessary fasteners. Available for right or left side, with side cover in Brushed or Satin Black finish. BAAK exclusive. Made in France

View

Classic vintage motorcycle handlebar clamps for cafe racer in aluminum

Classic vintage motorcycle handlebar clamps for cafe racer in aluminum 2

Parts

Handlebar risers motorcycle - universal

€96.00

Machined aluminum handlebar clamps for motorcycles. Available in diameters ø22mm, ø28.6mm or 1 inch (ø25.4mm), these machined aluminum clamps are lightweight and elegant. They are finished in high-quality satin black epoxy, machined from solid and delivered with stainless steel fasteners (size options available) Designed and manufactured by the BAAK...

View

Parts

Leather handlebar grips

€145.00

Leather handlebar grips. Wrapped in high-quality leather, they add a touch of elegance to your machine while maintaining a secure grip. Available in black leather, aged brown, gold. Four thread colors available to perfectly match your bike. For 1" (ø25.4mm) or ø22mm diameter handlebars. Supplied in pairs

View

Parts

Biltwell Thruster handlebar grips

€22.00

Handlebar grips Biltwell Thruster right and left, for characterful motorcycles. Provide a secure grip on the bars, perfect comfort and a look unmatched from stock. For 1" (25.4mm) or ø22mm diameter handlebars. Supplied in pairs.

View

Parts

Biltwell Renegade handlebar grips

€22.00

Handlebar grips Biltwell Renegade right and left, for characterful motorcycles. Provide a secure hold on the bars, perfect comfort and a look unmatched by the original. For 1" (ø25.4mm) or ø22mm handlebars. Supplied in pairs. Available in black only.

View

Parts

Heritage headlight

€99.00

Heritage front headlight for motorcycle. This side-mount M8 headlight measures ø180mm in diameter. Bowl and bezel in metal, its lens is plastic. This headlight offers an exceptional level of finish; its flat bowl will give your machine a more compact look. It is offered with a Brushed or Chrome bezel. Our universal headlight protection grille fits this...

View

Classic Front Headlight ø180mm - Universal

Parts

Classic Front Headlight ø180mm - Universal

€90.00

Round front headlight for classic motorcycles, with M8 side mounting and a diameter of ø180mm. It features a metal bucket and bezel, with a plastic lens, providing an exceptional level of finish. Its profiled bucket gives it a decidedly classic look. Depending on the chosen motorcycle model, a plug-and-play wiring harness is supplied (which may explain a...

View

Parts

Bates front headlight

€75.00

Bates-style headlight for motorcycle. This lower-mounted headlight measures ø15cm in diameter. Bowl and rim in metal. Discreet, it enhances the machine's look. This headlight is available in Brushed, Chrome, Satin Black, or Satin Black with Brushed or Chrome rim. It is supplied with the mounting plate adapted to the chosen motorcycle model. EU approved.

View

Headlight brackets for original Triumph headlight (after 2016)

-20%

Triumph

Headlight brackets for original Triumph headlight (after 2016)

€103.20 €129.00

Time left

Mounting brackets for original Triumph headlight (since 2016). This pair of headlight brackets replaces the originals to reveal the fork tubes. Compatible with the original headlight of T100 / T120 / Street Scrambler / Street Twin / Thruxton 1200 (since 2016). Available with turn signal brackets for Universal turn signals or original Triumph turn signals...

View

Triumph

Front fender mounting brackets for Triumph (after 2016)

€45.00

Front fender mounting brackets for Triumph (2016-... - liquid-cooled) in stainless steel. These mounting brackets allow you to adjust the height of your fender and guide cables along the fork. Particularly useful if you change the diameter of your front wheel. Supplied in pairs, fender not included. Made in France

View

Parts

Round motorcycle mirror ø8

€45.00

Mini mirror in steel with a Ø8cm diameter and M8 thread, ideal for a high position. The mirror stem measures 13cm long; its bend is specifically designed to ensure good rear visibility while remaining discreet. Sold individually, available in satin black only. Suitable for mounting on the right or left side.

View

Parts

Oval 3W Universal LED Turn Signals

€19.80

Universal oval LED turn signals in plastic with a total length of 60mm and M10 mounting stem. These turn signals feature a very nice finish, for a more discreet look than most stock indicators. They offer unbeatable value without compromising the style of your motorcycle. Sold in pairs. EU approved.

Short exhaust system for Triumph (post-2016)

-10%

Triumph

Short exhaust system for Triumph (post-2016)

€1,080.00 €1,200.00

Time left

Short exhaust system for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016, liquid-cooled), designed and manufactured in our workshop. The headers are stainless steel and the silencers are aluminum. This system delivers a deep sound, without resonance, and is not overly loud. It is easy to fit; all necessary...

View

Parts

Leather cable-guide strap

€8.00

Leather cable strap. This leather strap lets you secure your cables together or attach them to your handlebar. If, like us, the finish of your machine is one of your obsessions, this strap is ideal for your project. Available in Aged Brown leather, Black and Gold. Available in lengths 80mm, 90mm, 115mm, 130mm. Width 20mm. Sold individually, not in pairs.

View

Triumph

Wide triple clamp kit for Triumph T100-T120 (after 2016)

€1,200.00

Wide triple tree kit for Triumph T100 / T120 (2016-... - liquid cooled), allowing fitment of a wide front tyre (3.50). The kit includes upper and lower triple trees widened by 20mm, the lower bearing, disc spacers, clamps and axle. It allows a 25mm lowering of the front. This kit is notably used on our Triumph Bonneville T120 Bobber. We recommend...

View

Turn signal bracket kit for original front and rear for Triumph (after 2016)

-20%

Triumph

Turn signal bracket kit for original front and rear for Triumph (after 2016)

€24.00 €30.00

Time left

Turn signal mounting kit allowing relocation of Triumph original and accessory turn signals that have a mounting locator, thereby streamlining the lines of your machine. The front bracket fits at the level of your oil radiator, the rear brackets on the upper shock absorber pivots. These brackets are sold without turn signals.

View

Triumph

Short leather seat kit for Triumph (after 2016)

€1,290.00

Short leather seat kit for Triumph Bonneville T100, T120, Street Twin and Street Scrambler (2016-... - liquid cooled). This kit provides a shortened leather seat for a more compact look while retaining 2 comfortable places for riding two-up. Supplied with its assembly instructions. It includes: Seamless system buckle in aluminium Short leather seat...

View

Triumph

Heated grip removal kit for Triumph T120 (after 2016)

€54.00

Heated grip elimination kit for Triumph Bonneville T120 (2016-...). This grip kit allows fitting any handlebars to your T120 without cutting a notch in them to accommodate the heated grip system. The grips are Biltwell Thruster or Renegade (ø25.4mm), comfortable and high quality. Supplied as a pair.

View

-15%

Triumph

Lowering kit for Triumph (After 2016)

€1,071.00 €1,260.00

Time left

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We...

View

Long wiring harness kit for Triumph (post-2016)

-10%

Triumph

Long wiring harness kit for Triumph (post-2016)

€75.60 €84.00

Time left

Long cable kit for Triumph (2016-...) allowing the fitment of a wider handlebar on your bike. The kit includes the front brake hose extension and the clutch cable. We use it on the majority of our BAAK customized Triumphs.

View

-15%

Parts

BAAK Handlebar No.1 Ø25.4mm

€135.15 €159.00

Time left

BAAK No.1 stainless wide handlebar with constant diameter Ø25.4mm (1 inch). This handlebar provides a very comfortable riding position. With a good pullback toward the rider, it gives your machine an unmatched look and improves its handling. It is flatter than FlatTrack-style handlebars. Available in Satin Black or Brushed finish. The stainless tubes,...

View

Classic Medium front mudguard for Triumph

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Triumph

Heritage rear fender for Triumph (after 2016)

€360.00

Rear fender Heritage for Triumph (2016 - … - liquid cooled) in stainless steel. Shorter than your original rear fender, it retains a shape faithful to the original spirit, cleaner while providing optimal protection against road spray. Equipped with a Vintage LED taillight (CE approved) with number plate illumination, a license plate bracket, choice of...

View

Rear fender Classic for Triumph (2016 - …) Discover the Style

-20%

Triumph

Rear fender Classic for Triumph (after 2016)

€240.00 €300.00

Time left

Classic rear fender for Triumph (2016 - … - liquid cooled) in stainless steel. Its molded end gives it a raw and elegant classic look. It provides good protection against rear wheel spray. Equipped with an LED Bates taillight (CE approved), license plate illumination (CE approved), choice of license plate bracket, choice of rear turn signal brackets, a...

View

Triumph

Bates headlight mount wide fork yokes Triumph (after 2016)

€25.00

This Bates headlight mounting plate is intended for the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork yoke kit. Bolt hole centre distance: 113mm. Made from 4mm thick aluminium. Satin black epoxy paint.

Triumph

Rear fender wiring harness for Triumph

€19.00

Rear fender wiring harness for Triumph. This wiring harness allows you to connect an aftermarket set of turn signals + tail light to your Triumph. It is plug & play with your machine’s original connectors; be sure to select the correct model. This harness is supplied as standard with our rear fenders for Triumph. Available in short and long lengths....

View

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn signal wiring harness for Triumph (after 2016)

€29.00

This turn signal wiring harness is essential for fitting new turn signals to your Triumph (2016-... liquid-cooled). The harness is plug & play on your motorcycle’s original terminals. This 160mm harness is ideal for installing aftermarket turn signals. Supplied in pairs.

Parts

Headlight spacers

€22.00

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Parts

Leather care cream

€18.00

This leather care cream is a nourishing milk. It penetrates and feeds the leather. You can use it for your seats but also for any other leather item: shoes, jacket, gloves, leather saddlebags, etc. Capacity: 100 ml.

Parts

Clamps for exhaust wrap

€24.00

This set of 8 self-locking stainless steel clamps will allow you to properly attach the heat wrap to your exhaust. Don’t tell us you were just going to do that with twisted wire. Supplied as 8 units.

Aluminium side covers for Triumph (2016-...)

-20%

Triumph

Classic side covers for Triumph (after 2016)

€60.00 €75.00

Time left

Classic side covers for Triumph (from 2016), designed and manufactured in aluminum at the workshop in France. These covers replace the original side covers of your machine to give it a more assertive look. Available for the right or left side. Supplied with the necessary mounting screws. Available in Brushed or Satin Black finish. Dimensions: 265 x...

View

Triumph

Monza-style fuel cap for Triumph

€150.00

Monza fuel cap for Triumph. The legendary Monza-style caps will fit your Triumph tank using our specific adapter. Compatible with new generation Triumphs (2016-...) and older generation (pre-2016 - air-cooled). The complete kit includes the adapter, sealing gasket, screws and the Monza cap. The Monza caps are made from aluminum, polished finish.Beware of...

Parts

Heat wrap

€93.60

Here are 15 metres of 5cm-wide exhaust wrap to swaddle your exhaust and give you a BAD BOY look! For the black colour, it is strongly recommended to paint it with a high-temperature special paint; otherwise the colour will not hold long and your exhaust wrap will turn grey. Premium quality wrap — beware of low-cost imitations! The 8 stainless steel...

View

Parts

H4 bulb (yellow)

€12.00

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.

Triumph

2Win shock absorbers for Triumph (after 2016)

€517.20

2Win aluminium shocks for Triumph (liquid-cooled - from 2016). These 2Win shocks are adjustable in spring preload and hydraulics. Each click of the knob changes the compression and rebound hydraulic settings simultaneously, very easy to use. Aluminium shocks, sold in pairs. Available in 340mm and 350mm lengths.

View

Parts

Mirror adapter

€15.00

Improve your visibility with our BAAK handlebar mirror adapters Discover BAAK solutions to mount your mirrors safely and with style. We offer two types of handlebar adapters, designed to meet different needs and motorcycle configurations: Handlebar adapter ø22mm: Ideal for fitting our BAAK mini mirrors in the under-handlebar position. This discreet and...

View