Parts » Triumph

Monza gas cap

Monza gas tank cap. The legendary Monza cap will perfectly suit your gas tank thanks to our exclusive adapter. 

The full kit includes the gas cap, the seal, the necessary screwing and the adapter. This part is manufactured in aluminium, it's polished finish.

Beware of poor quality copies.

129 €

Removal Kit lambda sensors

Installation of this kit eliminates the lambda probes / sensors, to lure the injection system so your engine can provide more power, better engine rev increase and a more stable ticking over.

Fits the Triumph Bonneville T100 (2006 - ...), Scrambler, Thruxton, Thruxton 1200, Street Twin, Street Scrambler et T120.

59 €

Triumph Street Twin headlight - Brushed finish

Triumph Street Twin headlight 200mm diameter. More flat (135mm depth) than the original one, it offers a stronger look to your bike. The casing is in satin black metal, the hooping is available in chromed and brushed finish.

It enables you to keep the original optic with the Triumph logo in front of the bulb. It simply plugs on the original wiring harness of your Street Twin.

95 €

Motorcycle headlight Ø180mm - Brushed trim ring

Classic motorcycle headlight with British style, 180mm diameter. We offer it as a universal version, or a version designed for Triumph and Moto Guzzi, compatible with your original wiring harness.

The casing is in satin black metal, two different trim ring finishes are available. M8 side fixations.

95 €

Brackets for original headlight for Triumph (since 2016)

Headlight fixation brackets for Triumph Bonneville T120 / T100 (since 2016) original headlight. This pair of lighthouse brackets comes to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights.

Available with optional front turn indicators brackets.

135 €

Bates headlight for Triumph

Bates headlight for Triumph. This lower fixation lighthouse is 15cm diameter. Its casing and trim ring enables you to visually lighten your fork tubes and improve the look of your motorcycle.

Suits the Triumph Bonneville / Thruxton / Scrambler (before 2016) and the Triumph Street Twin / T100 / T120 / Thruxton 1200 (since 2016). It comes with a fixation bracket and a plug & play wiring harness.

114,01 €

Beringer braking kit for Triumph

Beringer complete front braking kit for Triumph. This kit is composed of a radial 4 pistons caliper, a Classic disk, a clutch control and a master cylinder. It garantees an better braking feeling and an improved power during every braking action.
The quality of these elements assures a great look for your motorbike. It's possible to buy each element of the kit separately. 

420 €

Beringer braking kit Street Twin & T100

Beringer full front braking kit for Triumph Bonneville T100, Street Twin and Street Scrambler. This kit is composed of a radial 4 pistons caliper, a Classic brake disk, a clutch control and a master cylinder. 
This part only suits the Triumph new generation (from 2016 - liquid cooled).

420 €

Beringer braking kit Triumph T120 & Thruxton 1200

Beringer full front braking kit for Triumph Bonneville T120 and Thruxton 1200. This kit is composed of a radial 4 pistons caliper, 2 brake Classic disks, a clutch control and a master cylinder. 
This kit includes two disks and two calipers. Suits the Triumph new generation only.

720 €

10mm headlight strut

Motorcycle headlight struts, made in aluminium, to perfectlly adjust the fixation of your headlight. The hole diameter is 8mm, the exterior diameter is 29mm.

For Moto Guzzi V7 headlight : 10mm

For Triumph headlight : 5mm

11 €

Regulator - Turn signals - Horn support for Triumph

This bracket enables you to relocate your rectifier, front turn signals and horn below your steering column. Visually lightens the line of the front of your bike by grouping these parts on one support.

Fits with Triumph Bonneville (T100 / SE), Thruxton and scrambler, EFI or carburetor (2001 - 2016).

Manufactured in stainless steel at our workshop, satin black powder coat painted.

49 €

Front bracket flashing for Triumph

This turn signal bracket / support for Triumph (air-cooled and liquid-cooled models) is simple, effective and very discreet. It enables you relocate your Universal turn indicators under the steering column. Stainless steel laser cut and satin black powder coated.

Fits with the bracket regulator Triumph, or can be tightened on the superior fixation of the oil cooling system.

19 €

Rear turn signal support for Triumph

Rear turn signals support for Triumph. Simple, effective and very discreet.  Stainless steel bracket laser cut (3mm thick) and satin black powder coat painted.

Fits with any rear fender. Delivered without turn signals.

Suits the Triumph Bonneville, Scrambler and Thruxton before 2016.

22 €

Switch Bracket for Triumph

Switch / ignition bracket for Triumph. This simple switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits right side on the injection models (EFI).

It requires to move the wiring harness that is in your headlight, under the gas tank, without having to lengthen any electric cable. 

Aluminum, laser cut, satin black powder coat painted.

49 €

Rectifier bracket for Triumph

This bracket enables you to relocate the voltage rectifier, in place of the horn. The horn can be attached below, on the same bracket.

I's manufactured in aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank.

Suits the Triumph Bonneville, Thruxton and Scrambler (before 2016 - air cooled).

30 €

Rear turn signals brackets for Triumph

Rear turn signals bracket for Triumph Bonneville, Scrambler, Thruxton, Street Twin, T100 (from 2016) and T120.

Enables you to mount your turn signals on the shock absorber axis for a more discreet look. Compatible with the original passenger grab handle.
Flashing Axis ø10mm, shock absorber axis Ø14mm or Ø16mm, length 50mm.

Comes in pairs.

19 €

Brackets kit for factory Triumph indicators

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axis. 

Fits for new Triumph Bonneville T100 / T120, Street Twin / Street Scrambler, Thrxuton 1200 (after 2016).

19 €

Mini Turn Signals

Mini blinkers. These small indicators are beautifully made and measures only 6cm long. They are bulbs indicators, classic and beautiful.

It's 21W bulbs blinkers.

Sold in pairs, it's an EU approved part.

19 €

Mini LED turn signals

Mini LED turn signals in aluminium with Ø8mm shaft. These blinkers are minimalistic, once switched off, it's nearly invisible wether it offers a perfect visibility when running. We use it on main part of our custom motorcycles project at the workshop.

Sold in pairs. Blinkers size : 19,5mm x 16mm. 12V / 3W.

78 €

Street Bar handlebar with leather protection

Street Bar handlebar with crossbar and leather / foam protection. This handlebar has a 22mm diameter for the grips and 28,6mm diameter for the clamps. Its design offers a confortable riding position. It's only available in satin black powder coat painting. 

Can be provided with optional BAAK aluminium handlebar clamps.

160 €

Mini turn signals Street Twin / T120 / Thruxton / T100

Mini turn signals for Triumph Bonneville T120 / Street Twin / Thruxton 1200 / T100 (from 2016). It has an M10 fixation shaft.
10w bulb.

Much more discreet than the original blinkers, it offers a better finish to your motorcycle. Available with Long shaft (37mm) or Short shaft (17mm).

Sold in pairs. Blinkers dimension : 45x55mm. 

19 €

Mini round aluminum turn signals

Aluminium mini blinkers, 4cm diameter, 21W bulbs, made in aluminium.

Very nice finish, much more discreet than most of the original turn signals. We use it on the major part of our custom projects.

Sold in pairs. UE approved.

55 €

Turn signals wiring harness for Street Twin

This turn signals wiring harness is necessary to adapt new turn signals on your Triumph Street Twin, Street Scrambler, T100 and T120 (after 2016 - liquid cooled) and Thruxton 1200. This 160mm wiring harness is plug and play on the original pods of your motorcycle. 

This product is perfet to acheive the mounting of aftermarket indicators.

It comes in pairs. Fits for front and rear turn signals.

11,50 €

Turn signals wiring harness for Triumph (before 2016)

This plug & play Turn signals wiring harness for Triumph (before 2016 - air cooled) enables connect any universal turn indicators to your OEM wiring harness. On one side it has an original wiring harness friendly pod, on the other side a 10mm universal connector on which one you.

Sold as a pair. Suitable for Triumph Bonneville, Thruxton and Scrambler (before 2016). 

29 €

Resistors for LED turn indicators

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. 

Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

8 €

Scroll To Top