Parts

Showing 97-120 of 469 item(s)

Handlebar Controls – Universal

Replacement lever for Kustom Tech master cylinder

€150.00

This replacement lever is only compatible with our Kustom Tech front brake master cylinder.

Handlebar Controls – Universal

Replacement lever for Grimeca / BAAK front brake master cylinder

€78.00

This replacement lever is only compatible with our Grimeca / BAAK front brake master cylinder.

Handlebar Controls – Universal

Rebuild kit for Kustom Tech or Grimeca brake master cylinder

€52.20

This rebuild kit for the brake master cylinder Kustom Tech or Grimeca will allow you to renew all seals and the piston of your master cylinder. Variants: Master cylinder: Grimeca or Kustom Tech Piston diameter: ø 12 mm or ø 14 mm

View

Handlebar Controls – Universal

Half switch housing mirror mount for Beringer controls

€64.80

This half clamp allows mounting of mirrors with M10x125 right-hand threads (threading like a standard bolt) directly onto your Beringer lever assembly. Compatible only with clutch and front brake master cylinders from Beringer. This bracket is compatible with all our Ø8 and Ø10 mirrors. Available in black only. Note, the part is not symmetrical — be...

View

Triumph

Front and rear Classic fender pack for Triumph (pre-2016)

€420.00

Front and rear fender pack for Triumph before 2016 - Bonneville - Thruxton - Scrambler. Designed to give your Triumph a retro, premium look while improving usability, this Classic fender pack delivers a more balanced silhouette, a timeless style and careful finishing down to the last detail.Made from stainless steel, the front and rear fenders combine...

View

Classic front and rear fender pack Moto Guzzi V7

Pack

Moto Guzzi

Classic front and rear fender pack Moto Guzzi V7

€420.00

Front and rear fender pack for Moto Guzzi V7 I, V7 II, V7 III and V7 850 Designed to give your Moto Guzzi V7 a retro, premium look while improving its usability, this Classic fender pack provides a more balanced profile, a timeless style and meticulous finishing.Made from stainless steel, the front and rear fenders combine strength, durability and...

View

Fantic

BAAK number board - Fantic Caballero

€29.00

Number board for Fantic Caballero in pressed brushed aluminum. Easy to fit on the original side covers after re-drilling them. Number board dimensions: 260 x 180 mm, mounting hole spacing: 179 mm Supplied with two screws and nuts. BAAK exclusive.

Turn signal brackets on license plate bracket - Fantic

Caballero 125-250-500

Turn signal brackets on license plate bracket - Fantic

€30.00

Turn signal mounts for license-plate bracket. These stainless steel turn signal mounting plates attach to your BAAK license-plate bracket for your Fantic Caballero. They are available in 3 versions : For turn signals with øM8 stem For turn signals with øM10 stem For original Fantic Caballero turn signals Supplied with stainless steel fasteners.

View

An artisanal mug born from the collaboration between BAAK and Les Empotées, a ceramist from Dijon.

An artisanal mug born from the collaboration between BAAK and Les Empotées, a ceramist from Dijon. 2

Home

Mug of the month No. 2

€24.00

An artisanal piece born from the collaboration between BAAK and Les Empotées, a ceramist from Dijon.Hand-shaped and engraved with French clay, each mug embodies our attention to detail and commitment to fine craftsmanship.A unique creation, designed to warm your hands and your winter.

An artisanal mug born from the meeting between BAAK and Les Empotées, a ceramist from Dijon.

An artisanal mug born from the meeting between BAAK and Les Empotées, a ceramist from Dijon. 2

Home

Mug of the month No. 1

€19.00

An artisanal piece born from the meeting of BAAK and Les Empotées, a ceramist from Dijon.Hand-shaped and hand-engraved with French clay, each mug embodies our taste for detail and well-crafted work.A unique creation, designed to warm your hands — and your winter.

Universal

Universal BAAK number board

€29.00

Universal number board in pressed brushed aluminum. Easy to fit on any mount or on a side cover. Number board dimensions: 260 x 180 mm, mounting hole spacing: 179 mm Supplied with two screws and nuts. BAAK exclusive.

Universal

Universal single US-style license plate bracket for bare rear fender

€22.80

This license plate bracket is designed for US-format (horizontal) plates. It is made from 3 mm thick aluminum, painted with satin black epoxy paint. It can be mounted directly to a fender using the supplied plate. You can install it elsewhere by adapting it to your needs. Overall dimensions: 96 mm (height), 169 mm (width)

Universal

Universal US license plate bracket with lighting mount for bare rear fender

€45.00

This plate bracket is suited to US-format license plates (horizontal). It is made from 3 mm thick aluminium, painted with satin black epoxy paint. It can be mounted directly on a fender thanks to its supplied plate. You can install it elsewhere by adapting it to your needs. This bracket allows mounting a license plate light with M6 or M8 fittings. Overall...

Universal

EU plate bracket with universal tab for bare rear fender

€45.00

This license plate bracket is designed for European-format license plates. It is made from 3 mm thick aluminium, painted with satin black epoxy paint. It can be mounted directly on a fender using the supplied plate. You can install it elsewhere by adapting it to your needs. This bracket allows fitting a license plate light in M6 or M8. Bracket dimensions...

Universal

Universal EU plate bracket for bare rear fender

€72.00

Center-to-center of the mounting holes 45 mm in M5. The necessary stainless hardware is supplied. You can fit this plate bracket to the rear fender of your choice. It can be mounted directly to a fender thanks to the supplied plate. You can install it elsewhere by adapting it to your needs. It is made from 3 mm thick aluminium, painted with satin black...

License plate bracket kit - Fantic Caballero 500

License plate bracket kit - Fantic Caballero 500 2

Caballero 125-250-500

Short license plate bracket kit for Fantic Caballero

€108.00

License plate bracket kit for Fantic Caballero. The bracket is painted satin black epoxy and allows reinstallation of your motorcycle's original license plate light. Compatible with Caballero 125, 250 and 500 from 2018 to 2023 + All versions except Flat Track This license plate bracket kit is not compatible with models from MY 2024 onwards.

Headlight protection grill Heritage - Universal

Headlight protection grill Heritage - Universal 2

Parts

Headlight protection grille Héritage - Universal

€90.00

This 3mm thick headlight grille in stainless steel is finished with a satin black epoxy paint, providing excellent protection for your headlight. It fits perfectly with our Phare Heritage but can also fit many OEM and aftermarket headlights (180mm diameter) thanks to the supplied spacers. Contains: - One headlight grille - Two 10mm thick spacers - Two...

Triumph

Bracket for large leather saddlebag for short seat kit Triumph (before 2016)

€240.00

Designed for our large removable leather saddlebags rolled or satchel-style, this bracket is compatible with our Triumph short seat kit (pre-2016) This bracket meets the need to be able to fit one or two large leather saddlebags only if you have a BAAK short seat kit. The bracket can be easily screwed on or off so you do not have to keep it permanently...

View

Flat Track handlebar kit for BSA 650 Goldstar

Goldstar 650

Flat Track handlebar kit for BSA 650 Goldstar

€189.00

Flat Track handlebar kit for BSA Goldstar 650. This kit includes :- a wide Flat Track handlebar (brushed or polished) - a brake hose extension With a wider handlebar that offers more sweep back toward the rider, your riding position will be more relaxed and comfortable. This handlebar also helps define your bike's style, giving it a sportier, more...

View

Goldstar 650

Side license plate bracket for BSA Goldstar 650

€104.00

Optimize the appearance of your BSA 650 Goldstar with this side license plate bracket. Equipped with a license plate light, the bracket comes with mounts for universal turn signals (M10) to be mounted on the shock absorber shaft. Made in France WARNING: Not compatible with original turn signals! Not compatible with the BSA Scrambler 650.

Goldstar 650

Heritage leather seat for BSA Goldstar 650

€579.00

This Heritage leather saddle for two changes the look of your BSA Goldstar 650 without sacrificing comfort. It redraws the bike’s line and lasts the distance, from daily rides to long outings.Note: this saddle is not compatible with the BSA Scrambler 650. The <strong,double-tanned leather does not wear out, it develops a patina: the saddle gains...

View

Rear Fender BSA 650 Gold Star – Vintage Style & LED Light | BAAK

Rear Fender BSA 650 Gold Star – Vintage Style & LED Light | BAAK 2

Parts

Rear fender Classic for BSA Goldstar 650

€319.00

Customize your BSA Goldstar 650 with this rear fender fitted with a Bates LED tail light, a license plate bracket and CE-approved license plate illumination. Say goodbye to the original plastic! This stainless steel fender is available in Brushed, Polished, epoxy Satin Black or ready to paint. Equipped with an LED tail light (CE-approved) with...

View

Front Fender for BSA 650 Gold Star – Retro-touring Look | BAAK

Front Fender for BSA 650 Gold Star – Retro-touring Look | BAAK 2

Parts

Front fender for BSA Goldstar 650

€129.00

Transform your BSA Goldstar 650 with this front fender, ideal for a more minimalist and elegant look. Say goodbye to the bulky original plastic! This stainless steel fender is available in Brushed, Polished, epoxy Satin Black or primed and ready for paint. This fender captures the spirit of vintage BSA motorcycles and is easy to install thanks to its...

View

Goldstar 650

Original turn signal brackets on license plate bracket for BSA Goldstar 650

€30.00

Turn signal brackets on license plate bracket. These stainless steel turn signal brackets mount to your BAAK license plate bracket for your BSA Goldstar 650. Supplied with stainless steel fasteners.