Parts

Showing 109-144 of 154 item(s)

2Win shock absorbers for Royal Enfield Bullet and Classic 500

2Win shock absorbers for Royal Enfield Bullet and Classic 500 2

Bullet / Classic (2008- ..)

2Win shock absorbers for Royal Enfield Bullet / Classic

2Win aluminium shock absorbers for Royal Enfield Bullet 500 / Classic 500 EFI (including Euro IV standards ones). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation simultaneous manner, it's very easy to use even while riding. These shock absorbers manufactured by...

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

€96.00

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

€300.00

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT, manufactured out of stainless steel at our workshop in France. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE...

View

Front mudguard risers kit for Royal Enfield Himalayan

Front mudguard risers kit for Royal Enfield Himalayan 2

Himalayan 400

Risers kit for Royal Enfield Himalayan front mudguard

€33.00

Risers kit for Royal Enfield Himalayan. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield Himalayan. Suitable for your original mudguard. The struts must be mounted between your original front mudguard holder and the fork.Made in France

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT

€30.00

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT. Simple and very discreet, these brackets are satin black powder coat painted and enable you mount any universal turn indicator with a øM8 or øM10 fixation on your Royal Enfield. It gets assembled under your lower from triple trees. It comes in pairs, sold without turn...

View

2Win shock absorbers for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

2Win shock absorbers for Royal Enfield 650 Interceptor / Continental GT

€517.20

2 Win aluminium shock absorbers for Royal Enfield 650 Interceptor / Continental GT (2018-...). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation at the same time, it's very easy to use even while riding. Available in 355mm (short stroke) and 360mm size (original...

View

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

€33.00

Risers kit for Royal Enfield 650 Interceptor / Continental GT front mudguard. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield 650 Interceptor / Continental GT. Suitable for your original mudguard. The struts must be mounted between your original...

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

€108.00

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT

€120.00

Classic Medium front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Extension for Classic ø10 round motorcycle mirror in aluminium

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

€168.00

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

€25.00

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

High Scrambler front mudguard for Moto Guzzi V7I and V7II

High Scrambler front mudguard for Moto Guzzi V7I and V7II 2

V7 I & V7 II (2007-2017)

Scrambler front mudguard for Moto Guzzi V7I / V7II

€285.00

High front fender for Moto Guzzi V7I and V7II. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your V7 thanks to the provided black fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and...

View

License plate holder for Royal Enfield Classic / Bullet original mudguard

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

€168.00

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

License plate holder for original Moto Guzzi V9 fender

V9 (2016 -...)

License plate holder for original Moto Guzzi V9 fender

€168.00

License plate holder for original rear fender of Moto Guzzi V9. This bracket, painted in satin black epoxy, mounts directly in place of the original unit. It consists of a license plate holder, a round LED tail light (EU approved) with license plate illumination, a pair of indicator brackets of your choice, and a plug & play wiring harness.

View

Side license plate holder for Royal Enfield Classic / Bullet

Bullet / Classic (2008- ..)

Side license plate holder for Royal Enfield Classic / Bullet

€168.00

Side license plate holder for Royal Enfield Bullet and Classic 500. It comes with its taillight and integrated license plate lightning, and gets assembled on the upper left shock absorber axle to visually lighten the tail of your bike. This holder comes with a plug & play wiring harness so you can assemble it easily on your Royal Enfield.

Moto Guzzi

Side license plate holder for Moto Guzzi

€95.00

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

View

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€30.00

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

View

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Leather seat for Royal Enfield Classic 500

Bullet / Classic (2008- ..)

Leather seat for Royal Enfield Classic 500

€531.60

Leather seat for Royal Enfield Classic 500. It keeps the comfort and shape of your original seat, with an additional touch of chic leather. This seat is handcrafted by our craftsmen at our workshop in France, based on an original Royal Enfield seat pan so it remains perfectly compatible with your motorcycle. It's available in aged brown, gold, and...

View

Parts

Racer leather seat for Moto Guzzi V7

€690.00

Racer leather seat for Moto Guzzi V7I, V7II et V7III. This seat is handcrafted by our craftsmen at BAAK's workshop in France, based on a Moto Guzzi seat pan so it remains perfectly suitable for your motorcycle. It's narrower than the original seat, it gives you a cafe racer look. It's available in Aged brown, Black, Gold leather color. Choose a classic,...

View

Leather seat for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Leather seat for Royal Enfield 650 Interceptor / Continental GT

€540.00

Heritage leather seat for Royal Enfield 650 Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on a Royal Enfield seat more comfortable than the original one and so it remains compatible with your motorcycle. It has the same shape as your original seat, but covered with leather which will give...

View

Moto Guzzi

Heritage leather seat for Moto Guzzi V7

€717.60

Heritage leather seat for Moto Guzzi V7I, V7II et V7III. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on an original Moto Guzzi seat pan so it perfectly fits your motorcycle. It's narrower than the original one, the shape of the leather cover makes it look very thin while keeping a good seating comfort. It's available...

View

Moto Guzzi

Classic leather seat for Moto Guzzi V7

€720.00

Classic leather seat for Moto Guzzi V7I, V7II et V7III. This seat is manufactured by our craftsmen at the workshop in France, based on a Moto Guzzi seat pan so it perfectly fits your motorcycle. It's narrower than the original one and offers a refined look while keeping a perfect seating comfort. It's available in Aged brown, Black, Gold leather color....

View

Royal Enfield

Leather gas tank strap for Royal Enfield

€135.00

Leather gas tank strap / belt for Royal Enfield Bullet and Classic 500 (Euro IV and pre-Euro IV), Continental GT 535 and Interceptor / Continental GT 650. It gives a distinguished classic look to your motorcycle and protects your gas tank from scratches. The hole around the gas tank cap will be different depending on the model of motorcycle you choose....

View

Moto Guzzi

Side leather saddlebag for Moto Guzzi V7 III / V9

€477.00

Side leather saddlebag for Moto Guzzi V9 and V7 III. This saddlebag is handcrafted at the workshop in a great quality leather. It's available in aged brown, gold, black. The kit includes two aluminium side covers and the bag fixed on the right side, left side, or one saddlebag bag on each side.Made in France Products available again soon

View

Classic ø10 round aluminum motorcycle mirror

Parts

Classic ø10 round aluminum motorcycle mirror

€64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

Parts

Leather cable guides

€8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Parts

Tracker bar handlebars

€159.00

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

View

Parts

Flat Track handlebars Ø22mm

€90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

View

Royal Enfield

Aluminium Trial front mudguard for Royal Enfield Classic / Bullet

€285.00

Scrambler front mudguard for Royal Enfield Bullet and Classic 500. Less enveloping than the original one, it will give a great trial / off road look to your motorcycle. It's perfect to visually lighten the front of your Royal Enfield equipped with a 21 inch front wheel. It's available in polished raw aluminium or brushed. Comes with its stainless steel...

Moto Guzzi

Mini front mudguard for Moto Guzzi

€165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

View

Moto Guzzi

Front fender Medium for Moto Guzzi

€165.00

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled to fit the original fender mounting system. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

€108.00

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

€120.00

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

€300.00

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

View