Parts

Showing 409-432 of 441 item(s)

Rear Classic fender for Triumph (pre-2016)

-20%

Triumph

Rear Classic fender for Triumph (pre-2016)

Time left

This classic rear fender for Triumph (pre-2016) in stainless steel is handmade in France by our craftsmen. Its moulded tip gives it a finely worked look, with a classic spirit. It is shorter and more discreet than the original. This kit includes the pre-drilled fender for the selected motorcycle model, the stainless steel hardware kit, choice of turn...

View

Rear fender Classic for Triumph (2016 - …) Discover the Style

-20%

Triumph

Rear fender Classic for Triumph (after 2016)

€240.00 €300.00

Time left

Classic rear fender for Triumph (2016 - … - liquid cooled) in stainless steel. Its molded end gives it a raw and elegant classic look. It provides good protection against rear wheel spray. Equipped with an LED Bates taillight (CE approved), license plate illumination (CE approved), choice of license plate bracket, choice of rear turn signal brackets, a...

View

Classic rear fender for Moto Guzzi V7 I / II and III

-20%

Moto Guzzi

Classic rear fender for Moto Guzzi V7 I / II and III

€240.00 €300.00

Time left

Classic rear fender for Moto Guzzi V7 I, V7 II and V7 III. Made of stainless steel, its molded end gives it a raw yet elegant classic look. It provides good protection against spray from the rear wheel. Equipped with an LED taillight (CE approved), license plate illumination, a choice of plate bracket (side or rear), choice of rear turn signal mounts, a...

View

Parts

Universal Classic Rear Fender

€300.00

Designed to give your motorcycle a retro and premium look while improving its usability, this rear Classic fender brings a more balanced line, a timeless style and a refined finish down to the smallest detail.Made from stainless steel, this fender combines strength, durability and elegance, while effectively protecting against rear-wheel spray. It is not...

View

Triumph

Bates headlight mount wide fork yokes Triumph (after 2016)

€25.00

This Bates headlight mounting plate is intended for the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork yoke kit. Bolt hole centre distance: 113mm. Made from 4mm thick aluminium. Satin black epoxy paint.

Triumph

Bates headlight mounting for Triumph Thruxton 1200 / Speed Twin

€25.00

Bates headlight mounting plate for Triumph Thruxton 1200 and Speed Twin. This plate is compatible with the lower triple clamp of the Thruxton 1200 / Speed Twin and allows you to fit a Bates lower-mount headlight to your machine. Bolt hole spacing: 113mm. Made from 4mm thick aluminium. Satin black epoxy paint.

Batte headlight fixing for Moto Guzzi V9

Batte headlight fixing for Moto Guzzi V9 2

V9 (2016-2024)

Bates headlight mount for Moto Guzzi V9

€25.00

Bates headlight mounting bracket for Moto Guzzi V9, required to fit a lower-mount (Bates-style) headlight on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish. This plate is supplied by default with our Bates Front Headlight kits for Moto Guzzi V9. Supplied with the necessary stainless steel fasteners.

Bates headlight mount for Moto Guzzi V7 III and V7 850

V7 III (2017-2022)

Bates headlight mount for Moto Guzzi V7 III and V7 850

€25.00

Bates headlight mounting bracket for Moto Guzzi V7 III and V7 850, essential to fit a lower-mount headlight (Bates type) on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish.

Parts

Universal Vintage Taillight

€44.00

Universal Vintage taillight. This Ø65mm metal LED taillight features a license plate light located beneath the lamp. It is finished in satin black epoxy. Less conspicuous than most original taillights, it gives your machine a decisively vintage look. Available with or without the brushed finish STOP cover. Compliant with EU standards.

View

Universal

Universal Old School taillight

€69.00

Old School LED taillight with integrated license plate illumination and fixed license plate bracket. Truly discreet and effective. Dimensions: diameter 45mm, depth 70mm. This taillight is certified to EU standards.

Universal

Universal Bates taillight

€39.00

Universal Bates-style LED tail light for motorcycle. This black universal light mounts to your rear fender, diameter ø50mm. The bracket allows adjustment of the light's tilt. Available in satin full black, and with Brushed or Chrome bezel. This tail light is EU homologated.

View

Triumph

Rear fender wiring harness for Triumph

€19.00

Rear fender wiring harness for Triumph. This wiring harness allows you to connect an aftermarket set of turn signals + tail light to your Triumph. It is plug & play with your machine’s original connectors; be sure to select the correct model. This harness is supplied as standard with our rear fenders for Triumph. Available in short and long lengths....

View

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn signal wiring harness for Triumph (after 2016)

€29.00

This turn signal wiring harness is essential for fitting new turn signals to your Triumph (2016-... liquid-cooled). The harness is plug & play on your motorcycle’s original terminals. This 160mm harness is ideal for installing aftermarket turn signals. Supplied in pairs.

Turn indicators wiring harness for BMW NineT

Parts

Turn signal wiring harness for BMW R NineT

€29.00

Turn signal wiring harness for BMW R NineT. These adapters allow you to connect any 10W universal turn signal to the original wiring harness of your BMW R NineT without cutting or soldering any wire. Supplied in pairs. Total length 360mm.

Parts

Headlight spacers

€22.00

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Parts

Leather care cream

€18.00

This leather care cream is a nourishing milk. It penetrates and feeds the leather. You can use it for your seats but also for any other leather item: shoes, jacket, gloves, leather saddlebags, etc. Capacity: 100 ml.

Parts

Clamps for exhaust wrap

€24.00

This set of 8 self-locking stainless steel clamps will allow you to properly attach the heat wrap to your exhaust. Don’t tell us you were just going to do that with twisted wire. Supplied as 8 units.

Parts

Horn center for Austin Mini (1967-2000)

€89.00

Aluminium cast steering wheel center for Austin Mini (1967-2000): Fits steering wheels with 9 M4 screws (here a Moto Lita), the center-to-center distance between adjacent screws is 35mm. The finish is deliberately raw cast aluminium, which gives this steering wheel center a distinctive character. Supplied with all necessary stainless steel fasteners.

Fork lowering shims for Triumph and Moto Guzzi

Fork lowering shims for Triumph and Moto Guzzi 2

-15%

Parts

Fork lowering shims for Triumph and Moto Guzzi

€16.15 €19.00

Time left

Short fork spring shims. To fit our short shocks and lower the front of your Triumph or Moto Guzzi proportionally, you will need these short fork spring shims. These shims are 2 cm shorter and replace the original shims.

View

Aluminium side covers for Triumph (pre- 2016)

-20%

Triumph

Classic side covers for Triumph (pre-2016)

€60.00 €75.00

Time left

Classic side covers for Triumph (pre-2016 - air-cooled), made from aluminium and available in Brushed or Satin Black finish. These covers replace your original plastic side covers. They give your machine a bolder look while concealing the air box. Supplied with the necessary mounting hardware. Available for right or left side.Made in France

View

Aluminium side covers for Triumph (2016-...)

-20%

Triumph

Classic side covers for Triumph (after 2016)

€60.00 €75.00

Time left

Classic side covers for Triumph (from 2016), designed and manufactured in aluminum at the workshop in France. These covers replace the original side covers of your machine to give it a more assertive look. Available for the right or left side. Supplied with the necessary mounting screws. Available in Brushed or Satin Black finish. Dimensions: 265 x...

View

Moto Guzzi

Starter cover for Moto Guzzi V7 and V9

€55.00

Starter cover for Moto Guzzi V7 and V9. Made from aluminum, this starter cover simply mounts over the part to dress it. Available in Satin Black (epoxy) or Brushed finish. This cover is compatible with the Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9. Designed and manufactured by our team in France.

View

-20%

BMW

Turn signal bracket covers for BMW NineT

2366

€24.00 €30.00

Time left

Front turn signal bracket covers for BMW NineT. These black bracket covers are particularly useful to refine the finish when you replace your original front turn signals. Designed in the workshop, manufactured in aluminium, they are painted in satin black epoxy paint. Supplied in pairs with the stainless steel fasteners required for fitting.

Triumph

M-tri Motogadget control unit for Triumph (before 2016)

€199.50

M-TRI multiplexing unit manufactured by Motogadget for Triumph Bonneville, Scrambler, Thruxton EFI from 2011 to present (electronic speedometer). Essential to remove the original speedometer, because without it the motorcycle will not start. This unit restores all original functions and allows fitting any speedometer. It is the unit used in the...

View