Parts

Showing 265-288 of 297 item(s)

Short license plate holder for Triumph Scrambler 1200 XC/XE/X

Short license plate holder for Triumph Scrambler 1200 XC/XE/X 2

New

Parts

Short license plate holder for Triumph Scrambler 1200 XC/XE/X

More discreet than the stock setup, this aluminum accessory replaces the unsightly plastic license plate holder of the Scrambler 1200, while retaining the original mudguard. The license plate light comes pre-wired with a plug & play connector. In the photos, the taillight and indicators are Triumph optional accessories.

BAAK | Tiny Daytona speedo for Royal Enfield 650

BAAK | Tiny Daytona speedo for Royal Enfield 650 2

Parts

Mini Daytona speedometer for Royal Enfield 650

Daytona 60 speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...) This plug & play speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original speedometer. The speedometer is delivered pre-wired, with its harness and satin black aluminum mounting plate. Your...

Round 21W turn indicators I BAAK

Round 21W turn indicators I BAAK 2

New

Parts

Round 21W turn indicators

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.

Système anti-vibration Bullet 500

Système anti-vibration Bullet 500 2

-40%

Home

Système anti-vibration Bullet 500

€64.92 €108.19

Bullet 500 anti-vibration system: this crankshaft plate, located behind the ignition flywheel, reduces engine vibrations by 50%.

Bates headlight support - Triumph 1200 Bobber

Bates headlight support - Triumph 1200 Bobber 2

New

Home

Bates headlight support - Triumph 1200 Bobber

Bates headlight mounting bracket for Triumph Bobber 1200. This bracket attaches to the lower triple tree of the Triumph Bobber 1200. This allows for the installation of a lower-mount Bates headlight. Made of 4mm thick stainless steel. Satin black epoxy paint.

Trail engine guard - Triumph 1200 XE-XC

Trail engine guard - Triumph 1200 XE-XC 2

New

Home

Trail engine guard - Triumph 1200 XE-XC

Aluminum Trail Skid Plate for Triumph Scrambler 1200 XE-XC In addition to giving your Scrambler an adventurous look, this skid plate provides effective protection for the lower engine in all conditions. Made of 4 mm thick aluminum, it provides a real shield against splashes, stones, and impacts associated with aggressive off-road riding. Easy to install,...

View

Bates Headlight Plate - Street Scrambler after 2019

Bates Headlight Plate - Street Scrambler after 2019 2

New

Home

Bates Headlight Plate - Street Scrambler after 2019

Designed specifically for Triumph Street Scramblers from 2019 onwards, this aluminum plate elegantly covers the space between the fork tubes after installing a lower-mounted Bates-style headlight. It conceals the steering column and cable routing, for a cleaner visual appearance and a neat finish. Attached with four genuine leather straps (available in...

View

Green Filter Replacement Air Filter for Triumph (2016–...)

New

Home

Green Filter Replacement Air Filter for Triumph (2016–...)

Optimize your motorcycle's performance with this Green Filter sports air filter, designed with double-layer oiled cotton for superior airflow and optimal filtration. Simple maintenance with the Green Filter kit (optional). Easy installation: directly replaces the original filter.More power, more torque, less fuel consumption.Washable and reusable for...

Flat leather seat for Royal Enfield Interceptor / Continental GT

Flat leather seat for Royal Enfield Interceptor / Continental GT 2

Parts

Flat leather seat for Royal Enfield Interceptor / Continental GT

Flat leather seat for Royal Enfield Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on an original Royal Enfield seat pan so it perfectly fits your motorcycle. The shape of the leather cover makes it look very thin while keeping a good seating comfort. It's available in Aged brown, Black,...

View

Adjustable shock absorber for Triumph Bobber 1200 I BAAK

Adjustable shock absorber for Triumph Bobber 1200 I BAAK 2

New

Bonneville Bobber (2017 -...)

Shock absorber for Triumph Bobber 1200

Big Body shock absorber for Triumph Bobber 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only knob which adjust both compression and relaxation (48 different levels of setting) in a...

Kickstand Extension for Triumph Scrambler (pre-2016)

Kickstand Extension for Triumph Scrambler (pre-2016) 2

New

Home

Kickstand Extension for Triumph Scrambler (pre-2016)

PRE-ORDER PRODUCT (available in October) Say goodbye to excessive lean on your Triumph Scrambler (pre-2016). This kickstand extension increases the length of your original stand by 20 mm. It reduces the bike’s excessive tilt when parked and ensures better stability on all types of terrain. Ideal if you've installed longer shocks or larger tires than...

Triangle Side Covers for T120

Triangle Side Covers for T120 2

New

Home

Triangle Side Covers for T120

Give your Triumph T120 a bolder character with these aluminum side covers. They replace the original plastic covers and elegantly hide the airbox while enhancing the classic style of your bike. Available in brushed or satin black finish, these covers are sold individually (right or left side) and come with all necessary mounting hardware. Made in France,...

View

Stainless steel necklace for fork bellows

Stainless steel necklace for fork bellows 2

New

Parts

Stainless steel necklace for fork bellows

batch of 4 self-stainless steel necklaces, allows the assembly of our leather fork fork bellows for a perfect and discreet finish.

Exhaust silencers for Royal Enfield Himalayan

Exhaust silencers for Royal Enfield Himalayan 2

Royal Enfield

Exhaust silencers for Royal Enfield Himalayan

Short exhaust silencer for Royal Enfield Himalayan. This aluminium muffler offers a strong and deep sound to your motorcycle, without being noisy. It's composed of multiple baffles that won't damaged the engine performances. At the entrance of the muffler are two high-temperature O-ring seals so there is no leak from the manifold. Not compliant with...

View

Triumph front and rear mudguard pack (2016-...)

Triumph front and rear mudguard pack (2016-...) 2

-10%
New
Pack

Home

Triumph front and rear mudguard pack (2016-...)

€378.00 €420.00

Front & Rear Fender Pack – Triumph (from 2016) BAAK offers a complete front and rear fender pack to customize your Triumph from 2016 with harmony and character. This pack includes: 1 Classic Medium Front Fender 1 Classic Rear Fender with Black Taillight (other taillight finishes available outside this pack) 1 Set of turn signal brackets of your...

View

Classic Headlight Pack Triumph After 2016 + Headlight Brackets

Classic Headlight Pack Triumph After 2016 + Headlight Brackets 2

-10%
New
Pack

Home

Classic Headlight Pack Triumph After 2016 + Headlight Brackets

€218.70 €243.00

BAAK offers you a plug & play headlight pack for a complete installation. This pack includes: A Classic ø180mm front headlight A plug & play wiring harness compatible with your Triumph model Headlight brackets (Ø41–42 clamps – bracket length: 60mm) Optional turn signal mounts EU approved

View

Bates Triumph headlight pack after 2016

Bates Triumph headlight pack after 2016 2

-10%
New
Pack

Home

Bates Triumph headlight pack after 2016

€306.00 €340.00

BAAK offers you a plug & play headlight pack for a complete installation. This pack includes: A Bates front headlight and its mounting plate A plug & play wiring harness compatible with your Triumph model A Bates headlight mounting plate for Triumph (2016–...) A front turn signal mount An ignition switch bracket (if your original top yoke...

View

Headlight brackets for original headlight for Interceptor 650

Headlight brackets for original headlight for Interceptor 650 2

-30%

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

€90.30 €129.00

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

View

Harness for adaptable indicator Royal Enfield

Harness for adaptable indicator Royal Enfield 2

Parts

Harness for adaptable indicator Royal Enfield

This indicator wiring harness is essential for adapting new indicators to your Royal Enfield. The harness is plug & play with the original connectors of your motorcycle. This 160 mm harness is ideal for installing aftermarket indicators mounted on Japanese cylindrical male connectors ranging from ø3.2 mm to 3.7 mm.Made in France by BAAK.Sold in pairs.

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

US plate bracket for original mudguard Royal Enfield 650 Inter/GT 2

-35%

Parts

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

€29.25 €45.00

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

Radiator guard for Royal Enfield 650 Interceptor / Continental GT 2

-35%

Parts

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

€54.60 €84.00

Protect your radiator with this protective grille specially designed for the Royal Enfield 650 Interceptor and Continental GT. Made of stainless steel, it guarantees unfailing strength. Its high-quality satin black epoxy paint ensures exceptional durability, with no risk of matification over time. Ideal as a replacement for the original grille, this...

Removable windshield glossy black

Removable windshield glossy black 2

-15%

Parts

Removable windshield for Royal Enfield 650 Interceptor

€693.60 €816.00

Equip your Royal Enfield 650 Interceptor with this retro-touring removable windshield kit. 2 sec to remove without tools. It includes a removable windshield and its mountings, as well as headlight brackets adapted to the original headlight. This windshield is compatible with the original headlight or any other ø180mm headlight Available in gloss black or...

View

Short seat kit rear loop for Royal Enfield 650

Short seat kit rear loop for Royal Enfield 650 2

-15%

Interceptor / Continental GT 650

Short seat kit rear loop for Royal Enfield 650

€168.30 €198.00

This rear loop is designed to shorten the back of your motorcycle, offering a sleek, minimalist style and a more compact overall silhouette. Made with a high-quality glossy black epoxy coating, it perfectly matches the frame’s color for discreet and seamless integration.

Rear Brake Master Cylinder Protection for Royal Enfield 650

Rear Brake Master Cylinder Protection for Royal Enfield 650 2

-35%

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650

€23.40 €36.00

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

1
…
11
12
13