Parts

Showing 217-240 of 244 item(s)

Home

Micro LED turn signal mo.blaze Tens1

Motogadget LED micro indicator – a minimalist design in aluminum with Ø8mm mounting stem. The mo.blaze tens by Motogadget is one of the smallest road-legal indicators in the world. Each indicator is crimped in our workshop with Japanese connectors to simplify installation on your bike. Available in Black or Polished aluminum finish. Indicator dimensions:...

Classic headlight with large integrated Daytona speedometer for Royal Enfield 650 Interceptor / Continental GT

Parts

Classic headlight with large integrated Daytona speedometer for Royal Enfield 650...

€599.00

Daytona W speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...) This plug & play integrated headlight with speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original speedometer. The speedometer is delivered pre-wired. It features a speedometer, a needle...

Short license plate holder for Triumph Scrambler 1200 XC/XE/X

Parts

Short license plate holder for Triumph Scrambler 1200 XC/XE/X

€150.00

More discreet than the stock setup, this aluminum accessory replaces the unsightly plastic license plate holder of the Scrambler 1200, while retaining the original mudguard. The license plate light comes pre-wired with a plug & play connector. In the photos, the taillight and indicators are Triumph optional accessories.

BAAK | Tiny Daytona speedo for Royal Enfield 650

BAAK | Tiny Daytona speedo for Royal Enfield 650 2

Parts

Mini Daytona speedometer for Royal Enfield 650

€369.00

Daytona 60 speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...) This plug & play speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original speedometer. The speedometer is delivered pre-wired, with its harness and satin black aluminum mounting plate. Your...

Parts

Round 21W turn indicators

€69.00

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.

-40%

Home

Système anti-vibration Bullet 500

€64.92 €108.19

Bullet 500 anti-vibration system: this crankshaft plate, located behind the ignition flywheel, reduces engine vibrations by 50%.

Bates headlight support - Triumph 1200 Bobber

Home

Bates headlight support - Triumph 1200 Bobber

€25.00

Bates headlight mounting bracket for Triumph Bobber 1200. This bracket attaches to the lower triple tree of the Triumph Bobber 1200. This allows for the installation of a lower-mount Bates headlight. Made of 4mm thick stainless steel. Satin black epoxy paint.

Home

Trail engine guard - Triumph 1200 XE-XC

€160.00

Aluminum Trail Skid Plate for Triumph Scrambler 1200 XE-XC In addition to giving your Scrambler an adventurous look, this skid plate provides effective protection for the lower engine in all conditions. Made of 4 mm thick aluminum, it provides a real shield against splashes, stones, and impacts associated with aggressive off-road riding. Easy to install,...

Bates Headlight Plate - Street Scrambler after 2019

Home

Bates Headlight Plate - Street Scrambler after 2019

€169.00

Designed specifically for Triumph Street Scramblers from 2019 onwards, this aluminum plate elegantly covers the space between the fork tubes after installing a lower-mounted Bates-style headlight. It conceals the steering column and cable routing, for a cleaner visual appearance and a neat finish. Attached with four genuine leather straps (available in...

Home

Green Filter Replacement Air Filter for Triumph (2016–...)

€61.98

Optimize your motorcycle's performance with this Green Filter sports air filter, designed with double-layer oiled cotton for superior airflow and optimal filtration. Simple maintenance with the Green Filter kit (optional). Easy installation: directly replaces the original filter.More power, more torque, less fuel consumption.Washable and reusable for...

Flat leather seat for Royal Enfield Interceptor / Continental GT

Parts

Flat leather seat for Royal Enfield Interceptor / Continental GT

€540.00

Flat leather seat for Royal Enfield Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on an original Royal Enfield seat pan so it perfectly fits your motorcycle. The shape of the leather cover makes it look very thin while keeping a good seating comfort. It's available in Aged brown, Black,...

Adjustable shock absorber for Triumph Bobber 1200 I BAAK

Bonneville Bobber (2017 -...)

Shock absorber for Triumph Bobber 1200

€420.00

Big Body shock absorber for Triumph Bobber 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only knob which adjust both compression and relaxation (48 different levels of setting) in a...

Royal Enfield

Exhaust silencers for Royal Enfield Himalayan

€345.00

Short exhaust silencer for Royal Enfield Himalayan. This aluminium muffler offers a strong and deep sound to your motorcycle, without being noisy. It's composed of multiple baffles that won't damaged the engine performances. At the entrance of the muffler are two high-temperature O-ring seals so there is no leak from the manifold. Not compliant with...

Headlight brackets for original headlight for Interceptor 650

Headlight brackets for original headlight for Interceptor 650 2

-30%

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

€90.30 €129.00

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

Harness for adaptable indicator Royal Enfield

Parts

Harness for adaptable indicator Royal Enfield

€33.00

This indicator wiring harness is essential for adapting new indicators to your Royal Enfield. The harness is plug & play with the original connectors of your motorcycle. This 160 mm harness is ideal for installing aftermarket indicators mounted on Japanese cylindrical male connectors ranging from ø3.2 mm to 3.7 mm.Made in France by BAAK.Sold in pairs.

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

US plate bracket for original mudguard Royal Enfield 650 Inter/GT 2

-35%

Parts

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

€29.25 €45.00

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

Radiator guard for Royal Enfield 650 Interceptor / Continental GT 2

-35%

Parts

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

€54.60 €84.00

Protect your radiator with this protective grille specially designed for the Royal Enfield 650 Interceptor and Continental GT. Made of stainless steel, it guarantees unfailing strength. Its high-quality satin black epoxy paint ensures exceptional durability, with no risk of matification over time. Ideal as a replacement for the original grille, this...

-15%

Parts

Removable windshield for Royal Enfield 650 Interceptor

€693.60 €816.00

Equip your Royal Enfield 650 Interceptor with this retro-touring removable windshield kit. 2 sec to remove without tools. It includes a removable windshield and its mountings, as well as headlight brackets adapted to the original headlight. This windshield is compatible with the original headlight or any other ø180mm headlight Available in gloss black or...

Short seat kit rear loop for Royal Enfield 650

Short seat kit rear loop for Royal Enfield 650 2

-15%

Interceptor / Continental GT 650

Short seat kit rear loop for Royal Enfield 650

€168.30 €198.00

This rear loop is designed to shorten the back of your motorcycle, offering a sleek, minimalist style and a more compact overall silhouette. Made with a high-quality glossy black epoxy coating, it perfectly matches the frame’s color for discreet and seamless integration.

Rear Brake Master Cylinder Protection for Royal Enfield 650

-35%

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650

€23.40 €36.00

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK 2

-15%

Parts

Bates Headlight / Integrated Speedometer for Royal Enfield 650

€589.90 €694.00

Bates Headlight with Integrated Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). Built into a ø150mm Bates headlight shell, this integrated speedometer headlight is a Plug & Play solution to streamline the cockpit of your Interceptor or Continental GT while retaining all the functionalities of your original...

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

-40%

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

€414.00 €690.00

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat

-30%

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

€84.00 €120.00

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

Royal Enfield

Rear Wiring Harness Only for Royal Enfield 650

€19.00

This wiring harness allows you to connect an aftermarket turn signal and rear light assembly to your Royal Enfield 650. It is plug & play with the original connectors of your bike. Available in short and long sizes. Designed and manufactured by our team at the BAAK workshop.