Parts

Showing 73-96 of 191 item(s)

BAAK | Leather Tool-Roll

BAAK | Leather Tool-Roll 2

-15%

Bodywork and protection

Leather Tool-Roll

€126.65 €149.00

Time left

BAAK leather Tool-Roll with visible stitching, hot stamping of the logo. Several compartments, open and closed. Top flap to hold the tools inside the kit. Dimensions closed (cm): H 10, W 26Open dimensions (cm): H 40, W 40

View

Rear mudguard wiring harness for BMW NineT

-15%

Parts

Rear mudguard wiring harness for BMW NineT

€16.15 €19.00

Time left

Rear fender wiring harness for BMW R NineT. This connector enables you connect any rear taillight (light / brake light) to the original wiring harness of your BMW NineT without having to cut or weld any wire. Sold individually. Total length: 160mm. This wiring harness initially comes with all our NineT rear mudguards.

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-15%

Parts

License plate holder for US format with light mount

€38.25 €45.00

Time left

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

License plate holder for US format

License plate holder for US format 2

-15%

Universal

License plate holder for US format

€38.25 €45.00

Time left

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK license plate holders.

Speedometer lowering kit for BMW NineT

Speedometer lowering kit for BMW NineT 2

-15%

Bmw

Speedometer lowering kit for BMW NineT

€18.70 €22.00

Time left

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

View

License plate holder for US format with rear light mount

License plate holder for US format with rear light mount 2

-15%

Parts

License plate holder for US format with rear light mount

€38.25 €45.00

Time left

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

View

Air filters kit for BMW NineT I BAAK

Air filters kit for BMW NineT I BAAK 2

-15%

Bmw

Air filters kit for BMW NineT

€236.64 €278.40

Time left

Air filters kit for BMW NineT. This kit includes two black air filters and a red oil breather. The air filters plug directly on the intake, in place of the original air intake pipes of your BMW NineT. No power or torque improvement with this kit, it's simply an aesthetic modification. We recommend you to go for our Aluminium battery box along with this...

View

Turn indicators / Brake light

Turn indicators / Brake light 2

-15%

Parts

Turn indicators / Brake light

€132.60 €156.00

Time left

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical.

Black adjustable shock absorber for BMW R 1200 NineT by BAAK

Black adjustable shock absorber for BMW R 1200 NineT by BAAK 2

-15%

Parts

Shock absorber for BMW NineT

€357.00 €420.00

Time left

Big Body shock absorber for BMW R 1200 NineT 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only synchronized knob which adjust both compression and relaxation (48 different levels of setting)...

Side leather saddlebag for BMW NineT by BAAK

Side leather saddlebag for BMW NineT by BAAK 2

-15%

Parts

Side leather saddlebag for BMW R NineT

€246.49 €289.99

Time left

This side leather saddlebag for BMW R 1200 NineT comes in place of your original air intake. His manufacturing is based on an aluminium plate that guarantees a rigid fixing on the machine, wrapped with leather to create a result that is harmonious with your gas tank shape. This saddlebag is available in Aged brown, black, gold leather.

View

Universal classic-vintage motorcycle rear mudguard

Universal classic-vintage motorcycle rear mudguard 2

-15%

Parts

Universal classic-vintage motorcycle rear mudguard

€102.00 €120.00

Time left

An essential accessory for retro motorcycle enthusiasts. Made from stainless steel, this fender is designed to give your motorcycle an authentic and elegant look. With its classic design and neat finish, it will add a unique touch of style to your café-racer, scrambler, or other motorcycle. This fender is specially designed to fit classic and vintage...

Universal motorcycle front headlight brackets

Universal motorcycle front headlight brackets 2

-15%

Parts

Universal motorcycle front headlight brackets

€109.65 €129.00

Time left

Mounting brackets for front motorcycle headlight, ø180mm, with lateral fixings for ø8mm bolts. They measure 85mm in length and are only available for ø41mm fork tubes. You can choose the option with two indicator mounting brackets, ø8mm or ø10mm (or none). Collars and bolts are made of stainless steel, and the brackets are made of aluminum, all painted...

View

Chrome front headlight for classic motorcycle ø180mm - vintage look

Chrome front headlight for classic motorcycle ø180mm - vintage look 2

-15%

Parts

Round chrome front headlight for classic motorcycle

€63.75 €75.00

Time left

Round front headlight for classic motorcycles, featuring side mounting M8 and a diameter of Ø180mm. It stands out with a 100% chrome metal housing and bezel, along with a plastic lens, offering an exceptional level of finish. Its streamlined housing gives it a distinctly classic look. Available in a universal version, compatible with any motorcycle. Made...

Tracker bar handlebars

Tracker bar handlebars 2

-15%

Parts

Tracker bar handlebars

€135.15 €159.00

Time left

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

Universal Reflector for License Plate

Universal Reflector for License Plate 2

-15%

Home

Universal Reflector for License Plate

€8.42 €9.90

Time left

Black finish, mounts on the license plate bracket or directly on the license plate.

M8 Turn Signal Mount on Ø56 Fork Tube

M8 Turn Signal Mount on Ø56 Fork Tube 2

-15%
New

Home

M8 Turn Signal Mount on Ø56 Fork Tube

€25.50 €30.00

Time left

Front turn signal mount on fork tube Ø56, simple, efficient, and especially very discreet. Made of stainless steel with a rubber protection strip. This mount is specifically compatible with: Caballero 125-250-500 from 2018 to... + All versions Sold without turn signals.

Mini LED 3W motorcycle turn indicator

Mini LED 3W motorcycle turn indicator 2

-15%
New

Parts

Mini LED 3W motorcycle turn indicator

€45.90 €54.00

Time left

Mini LED 3W turn indicator, manufactured out of aluminium, with Ø8mm shaft. These blinkers are minimalistic, once switched off, it's nearly invisible wether it offers a perfect visibility when running. We use it on main part of our custom motorcycles project at the workshop. Sheathed and with crimped Japanese pods. Blinkers size : 19,5mm x 16mm. 12V....

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-15%

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

€33.15 €39.00

Time left

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

Round 21W turn indicators I BAAK

Round 21W turn indicators I BAAK 2

-15%
New

Parts

Round 21W turn indicators

€58.65 €69.00

Time left

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-15%

Parts

Turn indicators holders on license plate

€25.50 €30.00

Time left

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

Aluminium Trial front mudguard for Royal Enfield Classic / Bullet

Aluminium Trial front mudguard for Royal Enfield Classic / Bullet 2

-15%

Royal Enfield

Aluminium Trial front mudguard for Royal Enfield Classic / Bullet

€242.25 €285.00

Time left

Scrambler front mudguard for Royal Enfield Bullet and Classic 500. Less enveloping than the original one, it will give a great trial / off road look to your motorcycle. It's perfect to visually lighten the front of your Royal Enfield equipped with a 21 inch front wheel. It's available in polished raw aluminium or brushed. Comes with its stainless steel...

View

Engine protection for Royal Enfield Bullet / Classic

Engine protection for Royal Enfield Bullet / Classic 2

-15%

Royal Enfield

Engine protection for Royal Enfield Bullet / Classic

€114.75 €135.00

Time left

Sump guard for Royal Enfield, manufactured out of aluminium. This 5mm thick aluminium engine protection comes with all the fixation hardware to be assembled on a Royal Enfield Classic 500 / Bullet 500. Available in brushed raw finish only, it offers a better look and highly protects your engine against the shocks and the front wheel projections.

View

Leather keychain by BAAK craftsmen

Leather keychain by BAAK craftsmen 2

-15%

Parts

Leather keychain

€16.15 €19.00

Time left

This leather keychain is handcrafted by our craftsmen in the same leather from which we manufacture our seats, saddlebags, etc... Simple and elegant, just as our motorized creations. It's available in Brown, black, gold or ruby (red) leather). The BAAK logo is hot-pressed on the keychain. You can attach your keys to it thanks to the ring, the...

View

Leather gas tank strap for Royal Enfield

Leather gas tank strap for Royal Enfield 2

-15%

Royal Enfield

Leather gas tank strap for Royal Enfield

€114.75 €135.00

Time left

Leather gas tank strap / belt for Royal Enfield Bullet and Classic 500 (Euro IV and pre-Euro IV), Continental GT 535 and Interceptor / Continental GT 650. It gives a distinguished classic look to your motorcycle and protects your gas tank from scratches. The hole around the gas tank cap will be different depending on the model of motorcycle you choose....

View

1
…
3
4
5
…
8