Summer sales

Showing 1-17 of 17 item(s)

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

Bmw

Turn indicators holder cover for BMW NineT

$27 $34

Front turn indicators holder cover for BMW NineT. These black aluminium bracket covers are particularly useful to keep a clean finish if you replace the original front blinkers. Designed and manufactured in our Lyon workshop in aluminum and powder coated in black. Comes in pair with the necessary hardware for the assembly.

Headlight struts

Headlight struts 2

-20%

Parts

Headlight struts

$20 $25

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Classic rear mudguard for BMW NineT

Classic rear mudguard for BMW NineT 2

-20%

Bmw

Classic rear mudguard for BMW NineT

$339 $424

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-20%

Bmw

Classic Medium front mudguard for BMW NineT

$258 $322

Classic Medium front mudguard for BMW NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the workshop in...

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

Bmw

Classic Mini front mudguard for BMW NineT

$258 $322

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

Medium front mudguard for BMW NineT

Medium front mudguard for BMW NineT 2

-20%

Bmw

Medium front mudguard for BMW NineT

$258 $322

Medium front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team...

Mini front mudguard for BMW NineT

Mini front mudguard for BMW NineT 2

-20%

Bmw

Mini front mudguard for BMW NineT

$258 $322

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-20%

Bmw

Scrambler front mudguard for BMW NineT

$258 $322

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

-20%

Bmw

Aluminium wheel arch for BMW NineT

$113 $141

Aluminium wheel arch for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R NineT...

Bates headlight plate for BMW NineT

Bates headlight plate for BMW NineT 2

-20%

Bmw

Bates headlight plate for BMW NineT

$153 $191

Headlight plate for Bates headlight for BMW R NineT. This aluminium plate enables to hide the steering column and the cables after the assembly of a Bates headlight on your NineT. Handcrafted out of aluminium, it's available in Satin black or Raw aluminium finish. Compatible with a Bates headlight or the original headlight. The leather fixation collars...

Bates headlight plate for Triumph (pre-2016)

Bates headlight plate for Triumph (pre-2016) 2

-20%

Triumph

Bates headlight plate for Triumph (pre-2016)

$153 $191

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

-20%

Triumph

Rear turn indicators brackets for Triumph

$27 $34

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Rear turn indicators brackets for Triumph (pre- 2016)

Rear turn indicators brackets for Triumph (pre- 2016) 2

-20%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

$27 $34

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

View

Front turn indicators bracket for Triumph

Front turn indicators bracket for Triumph 2

-20%

Triumph

Front turn indicators bracket for Triumph

$27 $34

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016) 2

-20%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

$44 $55

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Speedometer lowering kit for BMW NineT

Speedometer lowering kit for BMW NineT 2

-20%

Bmw

Speedometer lowering kit for BMW NineT

$20 $25

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-20%

Parts

Universal short headlight clamps for classic motorcycles

$117 $146

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...