BAAK Holidays

Showing 1-24 of 55 item(s)

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat) 2

-40%

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

$468 $781

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery 2

-35%

Interceptor / Continental GT 650

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery

$364 $560

Give your motorcycle a Roadster look by freeing up the space of the original airbox on your Royal Enfield Interceptor or Continental GT by replacing it with this airbox removal kit. This kit creates a hollow space, visually lightening the motorcycle. The air filters will no longer be hidden, revealing their function. This kit includes: 2 air filters 1...

Airbox removal kit for Triumph Bobber (2017)

Airbox removal kit for Triumph Bobber (2017) 2

-30%

Bonneville Bobber (2017 -...)

Airbox removal kit for Triumph Bobber (2017)

$178 $255

This airbox removal kit for Triumph Bonneville Bobber (2017-...) enables you replaced the original plastic airbox by an elegant leather protection part and two air filters and a crankcase breather. The air filters and breather are available in polished, satin black and brushed version. Appart from the aesthetic aspect, this modification leads to a slight...

Rear mudguard for Bobber 1200

Rear mudguard for Bobber 1200 2

-20%

Triumph

Rear mudguard for Bobber 1200 Triumph

$448 $560

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

Classic rear mudguard for BMW NineT

Classic rear mudguard for BMW NineT 2

-35%

Bmw

Classic rear mudguard for BMW NineT

$276 $424

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

$272 $339

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT, manufactured out of stainless steel at our workshop in France. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE...

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT 2

-15%

Interceptor / Continental GT 650

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

$263 $309

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT (2018-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your Royal Enfield. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x...

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

Bmw

Turn indicators holder cover for BMW NineT

$27 $34

Front turn indicators holder cover for BMW NineT. These black aluminium bracket covers are particularly useful to keep a clean finish if you replace the original front blinkers. Designed and manufactured in our Lyon workshop in aluminum and powder coated in black. Comes in pair with the necessary hardware for the assembly.

Headlight struts

Headlight struts 2

-40%

Parts

Headlight struts

$15 $25

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-20%

Parts

Universal Classic Medium front mudguard

$103 $129

Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to...

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

-20%

Parts

Universal Classic Mini front mudguard

$92 $115

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

Universal Medium front mudguard

Universal Medium front mudguard 2

-20%

Parts

Universal Medium front mudguard

$103 $129

Universal Medium front mudguard, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed...

Universal Mini front mudguard

Universal Mini front mudguard 2

-20%

Parts

Universal Mini front mudguard

$103 $129

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

BAAK N°1 handlebars Ø25,4mm

BAAK N°1 handlebars Ø25,4mm 2

-30%

Parts

BAAK N°1 handlebars Ø25,4mm

$126 $180

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

Original turn indicators brackets kit for Triumph (2016)

Original turn indicators brackets kit for Triumph (2016) 2

-35%

Triumph

Original turn indicators brackets kit for Triumph (2016)

$22 $34

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

Leather cable guides

Leather cable guides 2

-40%

Parts

Leather cable guides

$5 $9

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

-15%

Parts

Round mirror ø8 steel for motorcycle

$38 $44

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-40%

Parts

Motorcycle handlebar mounts, aluminum

$65 $109

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

$43 $51

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Leather gas tank strap for Royal Enfield

Leather gas tank strap for Royal Enfield 2

-35%

Royal Enfield

Leather gas tank strap for Royal Enfield

$99 $153

Leather gas tank strap / belt for Royal Enfield Bullet and Classic 500 (Euro IV and pre-Euro IV), Continental GT 535 and Interceptor / Continental GT 650. It gives a distinguished classic look to your motorcycle and protects your gas tank from scratches. The hole around the gas tank cap will be different depending on the model of motorcycle you choose....

Universal gas tank leather belt

Universal gas tank leather belt 2

-20%

Parts

Universal gas tank leather belt

$114 $143

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

Front turn indicators bracket for Triumph

Front turn indicators bracket for Triumph 2

-35%

Triumph

Front turn indicators bracket for Triumph

$22 $34

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

License plate holder for Triumph Bobber original mudguard (2017)

License plate holder for Triumph Bobber original mudguard (2017) 2

-30%

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

$143 $204

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

-35%

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

$18 $28

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

1
2
3