New Products

Showing 1-24 of 29 item(s)

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

€22.80

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

Parts

US license plate holder with tail light support

€22.80

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Triumph

Classic Mini front mudguard for Triumph

€108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

Triumph

Rectifier bracket for Triumph (pre- 2016)

€30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

License plate holder for original Moto Guzzi V9 fender

V9 (2016 -...)

License plate holder for original Moto Guzzi V9 fender

€168.00

License plate holder for original rear fender of Moto Guzzi V9. This bracket, painted in satin black epoxy, mounts directly in place of the original unit. It consists of a license plate holder, a round LED tail light (EU approved) with license plate illumination, a pair of indicator brackets of your choice, and a plug & play wiring harness.

View

Triumph

Side license plate holder for Triumph

€95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Moto Guzzi

Side license plate holder for Moto Guzzi

€95.00

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

View

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€30.00

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

View

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Triumph

Rear turn indicators brackets for Triumph

€30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Triumph

Engine protection for Triumph (pre-2016)

€115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

View

Triumph

Side number panel for Triumph (pre- 2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish....

View

Triumph

Bates headlight plate for Triumph (pre-2016)

€169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

View

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

View

Triumph

Mini front mudguard for Triumph

€165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Moto Guzzi

Mini front mudguard for Moto Guzzi

€165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

View

Parts

Universal Mini front mudguard

€114.00

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

View

Moto Guzzi

Front fender Medium for Moto Guzzi

€165.00

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled to fit the original fender mounting system. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View