New Products

Showing 1-12 of 34 item(s)

Large saddlebag support for short seat kit Triumph pre-2016

Large saddlebag support for short seat kit Triumph pre-2016 2

New

Home

Large saddlebag support for short seat kit Triumph pre-2016

Designed for our large removable rolled bags or satchel bags, this bracket is compatible with our short seat kit for Triumph (pre-2016). This bracket meets the need to install one or two large bags only if you have a BAAK short seat kit. The bracket can be easily screwed or unscrewed, so you don’t necessarily have to keep it permanently on your...

View

Kickstand Extension for Triumph Scrambler (pre-2016)

Kickstand Extension for Triumph Scrambler (pre-2016) 2

New

Home

Kickstand Extension for Triumph Scrambler (pre-2016)

Say goodbye to the excessive lean of your Triumph Scrambler (before 2016). This kickstand extension increases the length of your original stand by 20 mm. It reduces the excessive tilt of the bike once parked and ensures better stability on all types of terrain. Almost essential if you have installed longer shock absorbers or larger tires than the original...

License plate holder for US format with light mount

License plate holder for US format with light mount 2

Parts

License plate holder for US format with light mount

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

US license plate holder with tail light support 2

Parts

US license plate holder with tail light support

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

BAAK | Trail engine protection for Triumph T100/T120.

BAAK | Trail engine protection for Triumph T100/T120. 2

Parts

Trail engine protection for Triumph T100/T120

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

Rear turn indicators brackets for Royal Enfield by BAAK

Rear turn indicators brackets for Royal Enfield by BAAK 2

Royal Enfield

Rear turn indicators brackets for Royal Enfield

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph 2

Triumph

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

Rectifier bracket for Triumph (pre- 2016)

Rectifier bracket for Triumph (pre- 2016) 2

Triumph

Rectifier bracket for Triumph (pre- 2016)

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016) 2

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

License plate holder for Royal Enfield Classic / Bullet original mudguard

License plate holder for Royal Enfield Classic / Bullet original mudguard 2

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

Side license plate holder for Triumph

Side license plate holder for Triumph 2

Triumph

Side license plate holder for Triumph

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

1
2
3