New Products

Showing 1-36 of 56 item(s)

Large saddlebag support for short seat kit Triumph pre-2016

Home

Large saddlebag support for short seat kit Triumph pre-2016

Designed for our large removable rolled bags or satchel bags, this bracket is compatible with our short seat kit for Triumph (pre-2016). This bracket meets the need to install one or two large bags only if you have a BAAK short seat kit. The bracket can be easily screwed or unscrewed, so you don’t necessarily have to keep it permanently on your...

View

Kickstand Extension for Triumph Scrambler (pre-2016)

Home

Kickstand Extension for Triumph Scrambler (pre-2016)

$79.20

Say goodbye to the excessive lean of your Triumph Scrambler (before 2016). This kickstand extension increases the length of your original stand by 20 mm. It reduces the excessive tilt of the bike once parked and ensures better stability on all types of terrain. Almost essential if you have installed longer shock absorbers or larger tires than the original...

Interceptor / Continental GT 650

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery

$594.00

Give your motorcycle a Roadster look by freeing up the space of the original airbox on your Royal Enfield Interceptor or Continental GT by replacing it with this airbox removal kit. This kit creates a hollow space, visually lightening the motorcycle. The air filters will no longer be hidden, revealing their function. This kit includes: 2 air filters 1...

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

$144.00

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650 Interceptor

$43.20

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

$828.00

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

Parts

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

$100.80

Protect your radiator with this protective grille specially designed for the Royal Enfield 650 Interceptor and Continental GT. Made of stainless steel, it guarantees unfailing strength. Its high-quality satin black epoxy paint ensures exceptional durability, with no risk of matification over time. Ideal as a replacement for the original grille, this...

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

Parts

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

$27.36

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

Headlight brackets for original headlight for Interceptor 650

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

$154.80

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

View

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

$27.36

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

Parts

US license plate holder with tail light support

$27.36

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

BAAK | Trail engine protection for Triumph T100/T120.

Parts

Trail engine protection for Triumph T100/T120

$174.00

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT 2

Interceptor / Continental GT 650

Trail engine protection for Royal Enfield 650 Interceptor / Continental GT

$150.00

Aluminium engine protection for Royal Enfield 650 Interceptor / Continental GT (2018-...). In addition to offering your Royal Enfield an adventurer look, this sump guard provides a real protection to your motorcycle in any situation. His 4mm thick aluminium structure is a bulwark against the terrain bumps that could his your engine block. Very easy to...

View

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Aluminium intake covers for Royal Enfield 650 Interceptor / Continental GT

$78.00

Pair of aluminium intake covers for Royal Enfield 650. These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting hardware.

View

Royal Enfield

Rear turn indicators brackets for Royal Enfield

$36.00

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

Royal Enfield

Gallinella fairing kit for Royal Enfield 650 Interceptor / Continental GT

$1,499.99

Gallinella rear fairing kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). Turn this kit into the masterpiece of your custom project and make your Royal Enfield stand out from the mass. This kit includes: Screwed short subframe with cutting template Short leather seat Gallinella fiber fairing License plate holder, taillight (trim ring...

View

Triumph

Classic Mini front mudguard for Triumph

$129.60

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

$154.80

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

$201.60

This side license plate holder for Royal Enfield 650 Interceptor / Continental GT (2018-...) is designed to be mounted on your passenger footrest. It will let you clean the rear end of your motorcycle by re-locating the license plate. It comes with an EU approved taillight with integrated license plate lightning. It comes with a plug & play wiring...

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

$46.80

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

Interceptor / Continental GT 650

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT

$198.00

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Attention, this part is only compatible with our Flat triple trees kit, it requires to move the ignition switch under the gas tank. Manufactured out of aluminium, this plate comes to hide the steering column and cables left visible after the assembly of a Bates...

View

Side Number Plate Holder for Royal Enfield 650 Interceptor and Continental GT Satin Black

Side Number Plate Holder for Royal Enfield 650 Interceptor and Continental GT Satin Black 2

Interceptor / Continental GT 650

Royal Enfield 650 Interceptor / Continental GT number plate holder

$144.00

Royal Enfield 650 Interceptor / Continental GT (2018–...) side number plate holder made of aluminum. The brushed number plate is mounted on an aluminum side cover that replaces the original one, supplied with all necessary mounting hardware. Ideal for giving your Royal Enfield a Tracker look. Available for right or left side, with side cover in Brushed or...

View

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

$327.60

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT (2018-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your Royal Enfield. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x...

View

Royal Enfield - interceptor - side covers - black

Royal Enfield - interceptor - side covers - black 2

Interceptor / Continental GT 650

Side covers for Royal Enfield 650 Interceptor / Continental GT

$90.00

Aluminium side covers for Royal Enfield 650 Interceptor / Continental GT. These aluminium side covers are designed and manufactured by our craftsmen at the workshop. It comes in place of the original plastic side panels of your Interceptor or Continental GT 650, and will highly improve its finish level. Available for Left or right side, comes with all...

View

Engine protection for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Engine protection for Royal Enfield 650 Interceptor / Continental GT

$138.00

Engine protection / sump guard for Royal Enfield 650 Interceptor / Continental GT (2018-...). It will give a stronger look to Royal Enfield while protection the bottom of your engine against impacts and front wheels splashes. It's manufactured out of 1,5mm thick stainless steel. Available in Satin black or Brushed finish. It comes with all the necessary...

View

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

$115.20

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

$360.00

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT, manufactured out of stainless steel at our workshop in France. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE...

View

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT

$36.00

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT. Simple and very discreet, these brackets are satin black powder coat painted and enable you mount any universal turn indicator with a øM8 or øM10 fixation on your Royal Enfield. It gets assembled under your lower from triple trees. It comes in pairs, sold without turn...

View

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

$39.60

Risers kit for Royal Enfield 650 Interceptor / Continental GT front mudguard. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield 650 Interceptor / Continental GT. Suitable for your original mudguard. The struts must be mounted between your original...

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

$129.60

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

$201.60

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

$30.00

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Triumph

Rectifier bracket for Triumph (pre- 2016)

$36.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

$58.80

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Triumph

Side license plate holder for Triumph

$114.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

$58.80

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...