New Products

Showing 1-24 of 28 item(s)

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III

Home

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III

Remote switch bracket for Moto Guzzi V7 I / II / III. This kit allows you to relocate your key switch from its original position under the tank of your Moto Guzzi to simplify your cockpit. Relocating your key switch results in the loss of your motorcycle’s steering lock system.

Home

Trail engine guard - Triumph 1200 XE-XC

€160.00

Aluminum Trail Skid Plate for Triumph Scrambler 1200 XE-XC In addition to giving your Scrambler an adventurous look, this skid plate provides effective protection for the lower engine in all conditions. Made of 4 mm thick aluminum, it provides a real shield against splashes, stones, and impacts associated with aggressive off-road riding. Easy to install,...

View

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€129.00

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

Triumph

Windscreen for Triumph 1200 Scrambler XE-XC

€96.00

You'll agree that on the Triumph Scrambler XE and XC, the rear part of the original speedometer lacks a refined finish... That's why we created this windscreen, available in brushed aluminum or satin black, both simple and elegant, specifically designed for this model. Our windscreen is specially designed to perfectly complement the original fenders of...

View

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

€198.00

Side covers for Triumph Scrambler 1200 XC/XE in aluminium. Attaches to replace the original side covers of your Triumph 1200 XC or XE.

View

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€198.00

Optimize your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers specially designed for the original high exhaust line. They not only improve heat protection but also add a dynamic touch to your motorcycle. These covers allow you to replace the original plastic parts with a more robust and aesthetic solution. Easy to install, they fit directly...

View

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

€22.80

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

Parts

US license plate holder with tail light support

€22.80

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Royal Enfield

Rear turn indicators brackets for Royal Enfield

€30.00

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

€129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

License plate holder for Royal Enfield Classic / Bullet original mudguard

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

€168.00

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

Side license plate holder for Royal Enfield Classic / Bullet

Bullet / Classic (2008- ..)

Side license plate holder for Royal Enfield Classic / Bullet

€168.00

Side license plate holder for Royal Enfield Bullet and Classic 500. It comes with its taillight and integrated license plate lightning, and gets assembled on the upper left shock absorber axle to visually lighten the tail of your bike. This holder comes with a plug & play wiring harness so you can assemble it easily on your Royal Enfield.

Moto Guzzi

Side license plate holder for Moto Guzzi

€95.00

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

View

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€30.00

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

View

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Parts

Universal gas tank leather belt

€126.00

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Motorcycle mirror under handlebars round ø8 in steel

Parts

Motorcycle mirror under handlebars round ø8 in steel

€45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

Parts

Motorcycle handlebar mounts, aluminum

€96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Parts

Round mirror ø8 steel for motorcycle

€45.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Parts

Leather cable guides

€8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Moto Guzzi

Mini front mudguard for Moto Guzzi

€165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

View

Parts

Universal Mini front mudguard

€114.00

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

View

Moto Guzzi

Front fender Medium for Moto Guzzi

€165.00

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled to fit the original fender mounting system. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Parts

Universal Medium Front Fender

€114.00

Universal Medium Front Fender, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is not pre-drilled, so you can adapt it to any motorcycle. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View