New Products

Showing 1-45 of 45 item(s)

Home

Green Filter Replacement Air Filter for Triumph (2016–...)

Optimize your motorcycle's performance with this Green Filter sports air filter, designed with double-layer oiled cotton for superior airflow and optimal filtration. Simple maintenance with the Green Filter kit (optional). Easy installation: directly replaces the original filter.More power, more torque, less fuel consumption.Washable and reusable for...

Bates headlight support - Triumph 1200 Bobber

Home

Bates headlight support - Triumph 1200 Bobber

$30.00

Bates headlight mounting bracket for Triumph Bobber 1200. This bracket attaches to the lower triple tree of the Triumph Bobber 1200. This allows for the installation of a lower-mount Bates headlight. Made of 4mm thick stainless steel. Satin black epoxy paint.

Triumph

Rear Brake Caliper Guard for Triumph

$43.20

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

View

Side plate bracket for Triumph Bobber (2017)

Parts

Side plate bracket for Triumph Bobber (2017)

$114.00

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

Classic aluminum side covers for Triumph Speed Twin 1200 / Thruxton 1200

Home

Classic aluminum side covers for Triumph Speed Twin 1200 / Thruxton 1200

$90.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

View

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

Parts

Front turn indicators bracket for Triumph Bobber 1200

$30.00

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

View

Triumph

Rear mudguard for Bobber 1200 Triumph

$594.00

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

View

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

$27.36

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

Parts

US license plate holder with tail light support

$27.36

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

BAAK | Trail engine protection for Triumph T100/T120.

Parts

Trail engine protection for Triumph T100/T120

$174.00

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

$82.80

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

$154.80

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

Triumph

Bates headlight plate for Triumph (2016)

$202.80

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

View

BMW

Speedometer lowering kit for BMW NineT

$26.40

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

$252.00

Fender Eliminator Kit for Triumph Thruxton 1200 and Speed Twin Euro 4 / Euro 5 (2016 – …). This satin black aluminum undertray visually lightens the rear of your Triumph and gives it a more radical look. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic position), turn...

View

Bonneville Bobber (2017 -...)

Mini front mudguard for Triumph Bobber

$252.00

Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled and comes with its fixation bracket so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for the...

View

Classic mini front mudguard for Triumph Bobber

Bonneville Bobber (2017 -...)

Classic mini front mudguard for Triumph Bobber

$252.00

Classic Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't compatible with the models Bobber Black, Bobber TFC and...

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

$66.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

View

License plate holder for Triumph Bobber original mudguard (2017)

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

$216.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

View

Triumph

Side license plate holder for Triumph

$114.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Triumph

Relocated ignition switch control bracket for Triumph (2016)

$36.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Triumph

Front turn indicators bracket for Triumph

$36.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Parts

Universal gas tank leather belt

$151.20

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Triumph

Engine protection for Triumph (2016-...)

$138.00

This sump guard / engine protection is manufactured out of stainless steel. It will give a stronger look to Triumph (2016-... - liquid-cooled). It's 1,5mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. Available in Satin black or Brushed finish. It comes with all the necessary stainless steel screwing kit.

View

Motorcycle mirror under handlebars round ø8 in steel

Parts

Motorcycle mirror under handlebars round ø8 in steel

$54.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Triumph

Side number panel for Triumph (2016)

$144.00

Currently unavailable for sale Side number panel for Triumph (2016-...) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

Parts

Motorcycle handlebar mounts, aluminum

$115.20

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

BMW

Bates headlight plate for BMW NineT

$202.80

Headlight plate for Bates headlight for BMW R NineT. This aluminium plate enables to hide the steering column and the cables after the assembly of a Bates headlight on your NineT. Handcrafted out of aluminium, it's available in Satin black or Raw aluminium finish. Compatible with a Bates headlight or the original headlight. The leather fixation collars...

View

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

BMW

Aluminium wheel arch for BMW NineT

$150.00

Aluminum Fender Eliminator Kit for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R...

Parts

Round mirror ø8 steel for motorcycle

$54.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Parts

Leather cable guides

$9.60

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Airbox removal kit for Triumph Bobber (2017)

Bonneville Bobber (2017 -...)

Airbox removal kit for Triumph Bobber (2017)

$270.00

This airbox removal kit for Triumph Bonneville Bobber (2017-...) enables you replaced the original plastic airbox by an elegant leather protection part and two air filters and a crankcase breather. The air filters and breather are available in polished, satin black and brushed version. Appart from the aesthetic aspect, this modification leads to a slight...

View

Triumph

Original turn indicators brackets kit for Triumph (2016)

$36.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

View

Triumph

Lowering kit for Triumph Thruxton 1200 / Speed Twin

$1,332.00

Aluminium upper triple trees kit for lowering, for Triumph Thruxton 1200 and Speed Twin (2016-...). This flat upper triple trees in machined aluminium has the same width as your original one but enables to lower the front end of your bike by 25mm without lifting up the fork tubes over the stock triple trees, for a perfect aesthetic result. Original...

View

Parts

BAAK N°1 handlebars Ø25,4mm

$190.80

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

View

BMW

Scrambler front mudguard for BMW NineT

$342.00

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

View

BMW

Mini front mudguard for BMW NineT

$342.00

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

View

Parts

Universal Mini front mudguard

$136.80

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

View

BMW

Medium front mudguard for BMW NineT

$342.00

Front fender Medium for BMW R 1200 NineT, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled and comes with its stainless steel mounting plate adapted to the selected model, as well as all necessary stainless steel hardware. Designed and manufactured by our craftsmen in our workshop in...

View

Parts

Universal Medium Front Fender

$136.80

Universal Medium Front Fender, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is not pre-drilled, so you can adapt it to any motorcycle. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Classic Mini front mudguard for BMW NineT

BMW

Classic Mini front mudguard for BMW NineT

$342.00

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

View

Parts

Universal Classic Mini front mudguard

$122.40

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

View

BMW

Classic rear mudguard for BMW NineT

$450.00

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

View

Triumph

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

$30.00

Bates headlight fixation bracket for Triumph Thruxton 1200 and Speed Twin. This bracket fits the lower fork triple trees of the Thruxton 1200 / Speed Twin and enables you mount any Bates headlight with a lower fixation on your motorcycle. Distance between the fixation holes axis : 113mm. 4mm thick machined aluminium. Satin black powder coat painting.

Parts

Headlight struts

$26.40

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View