New Products

Showing 1-24 of 51 item(s)

Large saddlebag support for short seat kit Triumph pre-2016

Home

Large saddlebag support for short seat kit Triumph pre-2016

Designed for our large removable rolled bags or satchel bags, this bracket is compatible with our short seat kit for Triumph (pre-2016). This bracket meets the need to install one or two large bags only if you have a BAAK short seat kit. The bracket can be easily screwed or unscrewed, so you don’t necessarily have to keep it permanently on your...

View

Bates headlight support - Triumph 1200 Bobber

Home

Bates headlight support - Triumph 1200 Bobber

€25.00

Bates headlight mounting bracket for Triumph Bobber 1200. This bracket attaches to the lower triple tree of the Triumph Bobber 1200. This allows for the installation of a lower-mount Bates headlight. Made of 4mm thick stainless steel. Satin black epoxy paint.

Triumph

Rear Brake Caliper Guard for Triumph

€36.00

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

View

Side plate bracket for Triumph Bobber (2017)

Parts

Side plate bracket for Triumph Bobber (2017)

€95.00

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

Parts

Front turn indicators bracket for Triumph Bobber 1200

€25.00

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

View

Triumph

Rear mudguard for Bobber 1200 Triumph

€495.00

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

View

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

€22.80

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

Parts

US license plate holder with tail light support

€22.80

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

€69.00

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

View

Triumph

Classic Mini front mudguard for Triumph

€108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

€129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

BMW

Speedometer lowering kit for BMW NineT

€22.00

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

Bonneville Bobber (2017 -...)

Mini front mudguard for Triumph Bobber

€210.00

Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled and comes with its fixation bracket so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for the...

View

Classic mini front mudguard for Triumph Bobber

Bonneville Bobber (2017 -...)

Classic mini front mudguard for Triumph Bobber

€210.00

Classic Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't compatible with the models Bobber Black, Bobber TFC and...

Triumph

Rectifier bracket for Triumph (pre- 2016)

€30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

License plate holder for Triumph Bobber original mudguard (2017)

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€180.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

View

Triumph

Side license plate holder for Triumph

€95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Triumph

Rear turn indicators brackets for Triumph

€30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Parts

Universal gas tank leather belt

€126.00

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Triumph

Engine protection for Triumph (pre-2016)

€115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

View