New Products

Showing 25-48 of 51 item(s)

Royal Enfield - interceptor - side covers - black

Royal Enfield - interceptor - side covers - black 2

Interceptor / Continental GT 650

Side covers for Royal Enfield 650 Interceptor / Continental GT

Aluminium side covers for Royal Enfield 650 Interceptor / Continental GT. These aluminium side covers are designed and manufactured by our craftsmen at the workshop. It comes in place of the original plastic side panels of your Interceptor or Continental GT 650, and will highly improve its finish level. Available for Left or right side, comes with all...

View

Engine protection for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Engine protection for Royal Enfield 650 Interceptor / Continental GT

$138.00

Engine protection / sump guard for Royal Enfield 650 Interceptor / Continental GT (2018-...). It will give a stronger look to Royal Enfield while protection the bottom of your engine against impacts and front wheels splashes. It's manufactured out of 1,5mm thick stainless steel. Available in Satin black or Brushed finish. It comes with all the necessary...

View

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

$115.20

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

$360.00

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT, manufactured out of stainless steel at our workshop in France. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE...

View

Front mudguard risers kit for Royal Enfield Himalayan

Front mudguard risers kit for Royal Enfield Himalayan 2

Himalayan 400

Risers kit for Royal Enfield Himalayan front mudguard

$39.60

Risers kit for Royal Enfield Himalayan. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield Himalayan. Suitable for your original mudguard. The struts must be mounted between your original front mudguard holder and the fork.Made in France

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT

$36.00

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT. Simple and very discreet, these brackets are satin black powder coat painted and enable you mount any universal turn indicator with a øM8 or øM10 fixation on your Royal Enfield. It gets assembled under your lower from triple trees. It comes in pairs, sold without turn...

View

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

$39.60

Risers kit for Royal Enfield 650 Interceptor / Continental GT front mudguard. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield 650 Interceptor / Continental GT. Suitable for your original mudguard. The struts must be mounted between your original...

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

$129.60

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

$201.60

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

$30.00

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Parts

Universal gas tank leather belt

$151.20

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Motorcycle mirror under handlebars round ø8 in steel

Parts

Motorcycle mirror under handlebars round ø8 in steel

$54.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

Parts

Motorcycle handlebar mounts, aluminum

$115.20

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

BMW

Bates headlight plate for BMW NineT

$202.80

Headlight plate for Bates headlight for BMW R NineT. This aluminium plate enables to hide the steering column and the cables after the assembly of a Bates headlight on your NineT. Handcrafted out of aluminium, it's available in Satin black or Raw aluminium finish. Compatible with a Bates headlight or the original headlight. The leather fixation collars...

View

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

BMW

Aluminium wheel arch for BMW NineT

$150.00

Aluminum Fender Eliminator Kit for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R...

Parts

Round mirror ø8 steel for motorcycle

$54.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Parts

Leather cable guides

$9.60

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

BMW

Scrambler front mudguard for BMW NineT

$342.00

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

View

BMW

Mini front mudguard for BMW NineT

$342.00

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

View

Parts

Universal Mini front mudguard

$136.80

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

View

Moto Guzzi

Front fender Medium for Moto Guzzi

$198.00

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled to fit the original fender mounting system. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

BMW

Medium front mudguard for BMW NineT

$342.00

Front fender Medium for BMW R 1200 NineT, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled and comes with its stainless steel mounting plate adapted to the selected model, as well as all necessary stainless steel hardware. Designed and manufactured by our craftsmen in our workshop in...

View

Parts

Universal Medium Front Fender

$136.80

Universal Medium Front Fender, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is not pre-drilled, so you can adapt it to any motorcycle. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Classic Mini front mudguard for BMW NineT

BMW

Classic Mini front mudguard for BMW NineT

$342.00

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

View