New Products

Showing 1-17 of 17 item(s)

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

View

Fork Spring blocks +15mm for Moto Guzzi V7 850

Fork Spring blocks +15mm for Moto Guzzi V7 850 2

Parts

Fork Spring blocks +15mm for Moto Guzzi V7 850

This pair of stainless steel fork spring shims allows you to raise the front end of your V7 850 by 15mm, so that your bike retains a similar ride height if you fit our 390mm Big Body shocks. These spacers are simply fitted in addition to the original fork spring spacers. sold in pairs Made in France

License plate holder for US format with light mount

License plate holder for US format with light mount 2

Parts

License plate holder for US format with light mount

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

US license plate holder with tail light support 2

Parts

US license plate holder with tail light support

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Rear turn indicators brackets for Royal Enfield by BAAK

Rear turn indicators brackets for Royal Enfield by BAAK 2

Royal Enfield

Rear turn indicators brackets for Royal Enfield

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

Universal gas tank leather belt

Universal gas tank leather belt 2

Parts

Universal gas tank leather belt

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

Parts

Motorcycle mirror under handlebars round ø8 in steel

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

Parts

Motorcycle handlebar mounts, aluminum

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

Parts

Round mirror ø8 steel for motorcycle

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Leather cable guides

Leather cable guides 2

Parts

Leather cable guides

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Universal Mini front mudguard

Universal Mini front mudguard 2

Parts

Universal Mini front mudguard

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

View

Front fender Medium for Moto Guzzi

Front fender Medium for Moto Guzzi 2

Moto Guzzi

Front fender Medium for Moto Guzzi

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled to fit the original fender mounting system. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Universal Medium front mudguard

Universal Medium front mudguard 2

Parts

Universal Medium Front Fender

Universal Medium Front Fender, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is not pre-drilled, so you can adapt it to any motorcycle. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

Parts

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

View

Headlight struts

Headlight struts 2

Parts

Headlight struts

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View