V7 III (2017-2022)

Showing 1-36 of 76 item(s)

Parts

Waterproof seat cover

This cover has been designed to protect your Baak leather seat or your original seat from rain and external elements when your motorcycle is parked. Waterproof, resistant to UV, heat and cold, it can be easily stored in its included carry bag and takes up very little space once folded. A subtle tone-on-tone Baak logo decorates the cover. Do not ride...

Moto Guzzi

Side cover with leather saddlebag for Moto Guzzi V7 III / V9

€273.00

Leather side saddlebag for Moto Guzzi V7 III and V9. Add a touch of retro style and functionality to your Moto Guzzi with this leather side saddlebag. Discreet and elegant, it allows you to carry a few personal items while fitting perfectly with your motorcycle's lines. Made from high-quality full-grain leather, the saddlebag is offered in four...

View

Moto Guzzi

Side cover with number plate for Moto Guzzi V7 III / V9

€120.00

Side cover with number plate for Moto Guzzi V7 III and V9 Give your Moto Guzzi V7 III or V9 a Tracker, Scrambler or Café Racer look with this side cover number-plate holder. The aluminum cover is available in Brushed or Satin black epoxy finish; the number plate is always in brushed aluminum. This side cover mounts in place of the original side cover. The...

View

Universal Round LED Turn Signals in Aluminum - BAAK

Universal Round LED Turn Signals in Aluminum - BAAK 2

Parts

Turn signals Round - LED 5W version

€89.00

Discover our Round turn signals in LED version. Made from aluminum with a 40mm diameter, 5W LED bulbs and an M10 mounting stem. These universal turn signals feature a very fine finish, they are small enough to be discreet and elegant, yet large enough to deliver a vintage look perfectly neo-retro. This LED version provides compatibility with the...

Rear classic bare fender for Moto Guzzi V7 I / II and III

-20%

Moto Guzzi

Rear classic bare fender for Moto Guzzi V7 I / II and III

€151.20 €189.00

Time left

This Classic rear fender is delivered in a bare version: without accessories, to give you total freedom in customizing your motorcycle. It is made of stainless steel, and its design with a <strong=sculpted end gives it a raw and elegant classic look. It provides good protection against spray from the rear wheel. The integrated holes and supplied...

View

-20%

Moto Guzzi

Side covers for Moto Guzzi V7 III / V9

€60.00 €75.00

Time left

Side covers for Moto Guzzi V7 III and V9. These aluminum side covers are designed and made by our craftsmen in the workshop. They replace the original plastic side covers of your Moto Guzzi V7 III / V9 and will improve its level of finish. Available for the Left or Right side, delivered with the full required fastening system. They are available only in...

View

Moto Guzzi

Rear fender wiring harness for Moto Guzzi

€19.00

Rear fender wiring harness for Moto Guzzi. This harness allows you to connect aftermarket turn signals + taillight on your Moto Guzzi. It is plug & play with your machine’s original terminals. Available in long or short length. Subject to sufficient cable length, we recommend the short length for mounting on the shock absorber axle and the long...

View

Classic front headlight ø180mm - Moto Guzzi V7

Parts

Classic front headlight ø180mm - Moto Guzzi V7

€110.00

Classic round front headlight for motorcycle Moto Guzzi V7 I, II, III, V7 850 and V9 with M8 side mounting and a diameter of ø180mm. It features a metal bowl and bezel, with a plastic lens, offering an exceptional level of finish. Its profiled bowl gives it a distinctly classic look. To choose the plug&play wiring harness, simply indicate whether...

View

Parts

Old School sticker sheet

€9.00

Printed on a UV-resistant vinyl, these Old School stickers are ready to withstand rain, heat and long journeys! Each design is precisely cut, with a glossy finish on a white background.Fairing, helmet, tank or toolbox, whatever the place, it sticks, it holds, and it tells a story. It’s a tribute to garage culture, to beautiful, authentic machines, and...

View

Classic front and rear fender pack Moto Guzzi V7

-20%
Pack

Moto Guzzi

Classic front and rear fender pack Moto Guzzi V7

€336.00 €420.00

Time left

Front and rear fender pack for Moto Guzzi V7 I, V7 II, V7 III and V7 850 Designed to give your Moto Guzzi V7 a retro, premium look while improving its usability, this Classic fender pack provides a more balanced profile, a timeless style and meticulous finishing.Made from stainless steel, the front and rear fenders combine strength, durability and...

View

Round turn signals in aluminum 21W - BAAK

Round turn signals in aluminum 21W - BAAK 2

Parts

Turn signals Round 21W

€69.00

Mini Round turn signals in aluminum, 40mm diameter, with 21W bulbs and M10 mounting stem. These turn signals have a very fine finish for a subtler look than most stock indicators. Be careful to respect polarity when connecting: Black wire: + Black/white wire: - Sold in pairs. EU approved. Click here if you want the 5W LED version.

Parts

Mini turn signal LED mo.blaze Pin

€54.00

Mini motogadget LED turn signal 3W minimalist aluminium turn signal with an Ø8mm mounting stem. When off, these turn signals are almost invisible, while providing ideal brightness in operation. We use them on the majority of our custom projects. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your...

View

Universal

Micro turn signal LED mo.blaze Tens1

€49.42

Micro motogadget LED turn signal minimalist aluminum unit with Ø8mm mounting stem. The motogadget mo.blaze tens is one of the smallest certified turn signals in the world. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Finish choice in Black or polished Aluminum finish. Turn signal...

View

Moto Guzzi

Leather tank strap pack + Monza filler cap Moto Guzzi V7 III & V9

€240.00

The leather tank strap and Monza cap pack is the perfect assembly for your Moto Guzzi V7 III & V9. Pair the vintage style of the Monza cap with the handcrafted elegance of the brown leather strap for a unique look. Made in France.

View

Parts

Universal VANS 22mm handlebar grips

€28.80

Vans handlebar grips right and left, for motorcycles. Featuring the classic waffle sole pattern of Vans® and made from ODI's exclusive grip compounds For 22mm diameter handlebars also available below in ø25mm. Supplied in pairs.

-20%

Home

Universal reflector for license plate

€7.92 €9.90

Time left

Black finish, mounts on license plate bracket or directly on the license plate.

2Win Shock Absorbers for Moto Guzzi V7 III - V9

2Win Shock Absorbers for Moto Guzzi V7 III - V9 2

Parts

2Win shocks for Moto Guzzi V7 III - V9

€517.20

2Win shock absorbers for Moto Guzzi V7 III and V7 9. These shock absorbers are adjustable in spring preload and hydraulic damping. Each click of the knob changes the compression and rebound hydraulic settings simultaneously. They are very simple to use.

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-20%

Parts

Headlight brackets for original Moto Guzzi V7 III / V7 850 / V9 headlight

€103.20 €129.00

Time left

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight brackets, compatible with original LED and bulb headlights.60 mm long with 39–40 mm mounting clamps, they also allow installation of aftermarket turn signals. Satin black epoxy finish, delivered in pairs with stainless steel fasteners for a simple and robust...

View

Classic ø10 round motorcycle mirror in aluminum, long stem

Classic ø10 round motorcycle mirror in aluminum, long stem 2

Parts

Classic round motorcycle mirror ø10 long stem

€66.00

The HIGHSIDER Pro MONTANA XL round motorcycle mirror combines elegance and practicality with a timeless design. Its black anodized finish, paired with a 175 mm articulated stem, provides improved rear visibility. Designed to enhance ergonomics and ensure a minimalist look, it fits vintage and custom motorcycles perfectly. Certified to European CE (E9)...

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish 2

Parts

LED motorcycle turn signals type Bullet black/brushed bezel

€78.00

Round LED 10W motorcycle turn signals, Bullet-style in black aluminum with brushed trim, simply beautiful. With a clear lens, they measure 20 mm in diameter and 36.5 mm in length. They install easily using a screw mounting (M8mm) and are compatible with a 12 V system. Delivered sleeved and with crimped Japanese round terminals ø3.2mm Approved to CE...

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Bar-end mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

The elegance of discretion. Designed for lovers of pure lines, this mirror in aluminum stands out for its profile of absolute thinness (only 5 mm thick). Its short stem and satin black finish allow it to blend with total sobriety on the handlebars of a Café Racer, a Scrambler or a characterful classic. A distinguished accessory that knows how to...

Removable windscreen for Moto Guzzi V7 III / V7 850

Removable windscreen for Moto Guzzi V7 III / V7 850 2

Parts

Removable windscreen for Moto Guzzi V7 III / V7 850 / V9

€816.00

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windshield. 2 seconds to remove it without tools. Supplied with its fixings and headlight brackets, it is available in gloss black or leather (black or brown). Note, the stock headlight is not compatible; you will need a classic headlight ø180mm and a front turn signal...

View

Parts

Front headlight wiring harness for Moto Guzzi

€27.00

This front headlight wiring harness for Moto Guzzi is compatible with models V7, V7 II, V7 III, and V7 850. Ideal for your motorcycle customization projects. Two options available for: Plug-and-play installation of an aftermarket front headlight. Converting a Moto Guzzi equipped with an OEM LED headlight to an adaptable bulb headlight. Sold...

View

Parts

Large rolled leather saddlebag

€897.00

Large rolled leather saddlebag, carefully handmade by our craftsmen. Highly detailed, this fine leatherwork piece is made with BAAK leathers and suede. The rolled saddlebag is compatible with ALL SW‑Motech SLC side brackets (motorcycle bracket not included). For everyday use or for your holidays. Available in Brown or Black finish, according to your...

View

Parts

Large satchel-style leather saddlebag

€897.00

Discover our removable satchel-style leather saddlebag, an exceptional piece hand-crafted by our French artisans. Every detail is meticulously executed, reflecting our commitment to quality. This sublime leatherwork creation is made from BAAK vegetable-tanned leathers of the highest quality. The rolled saddlebag is compatible with ALL SW-Motech SLC side...

View

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi 2

Parts

Turn Signals + Brake Light 3-in-1 - Full Black

€156.00

These elegant aluminium turn signals streamline your motorcycle. The rear turn signals integrate brake lights and position lights. The front turn signals are classic and only provide the turn signal function. Powerful lighting. Stem M8 ø, 38mm long, 22mm ø lens.

View

US license plate bracket with license plate light bracket

US license plate bracket with license plate light bracket 2

-20%

Parts

US license plate bracket with license plate light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (horizontal) license plates. It is made from 3mm thick aluminum, finished in satin black epoxy paint. This bracket allows mounting a license plate light. It is mandatory to purchase one of our license plate brackets offered by BAAK.

Parts

BAAK replacement silencer

€588.00

BAAK replacement exhaust silencers are sold in pairs with mounting brackets and bolts. Select your motorcycle model and we will craft these silencers to fit perfectly with BAAK headers. The muted tone remains the same, the finish matched.

View

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal dual-headlight headlight fairing draws its inspiration from 1980s trail bikes. Ideal for a Scrambler project, this fairing is designed by us and made from fiberglass. It includes an extension of the wiring harness and aluminum mounting brackets that attach to the fork tubes (ø39 - ø40mm / ø41 - ø42mm / ø43mm optional).We offer it in a raw...

View

License plate bracket for US side-mounted plate

License plate bracket for US side-mounted plate 2

-20%

Parts

License plate bracket for US side license plate

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (vertical) license plates mounted in a side position. It is made from 3mm-thick aluminum, painted with satin black epoxy paint. It is essential to purchase one of our BAAK side license plate brackets.

BAAK leather dye, ideal for motorcycle seats

Parts

Leather dye

€24.00

This leather coloring cream is a maintenance solution. It penetrates the leather and restores a deep black tone. You can use it for your seats but also for any other leather product: shoes, jackets, gloves, leather saddlebags, etc. Contents: 200 ml. Available for Black, Brown, Gold leather.Apply with a cloth, mixed with our maintenance cream (30% dye...

View

Leather handlebar grip pad (black, brown, gold, red) for motorcycle

Leather handlebar grip pad (black, brown, gold, red) for motorcycle 2

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Beyond the protection it provides in case of impact with your handlebar, this pad and its leather cover will give a more refined look to the front of your machine. Our craftsmen reinterpret the codes of off-road handlebar pads here to give them an aesthetic use. The inner diameter that contacts the crossbar is ø12mm, the...

View

Parts

Universal license plate lighting

€18.00

LED license plate light. This license plate light is approved to European ECE standards (12V / 2W). We use it on some of the license plate brackets manufactured at the BAAK workshop. License plate light dimensions: Length 17mm Diameter 12mm Mounting stem øM8.

Aluminum turn signal brackets for license plate bracket

Aluminum turn signal brackets for license plate bracket 2

Parts

Turn signal brackets on license-plate bracket - Universal

€30.00

Turn signal brackets for license plate mount. These stainless steel turn signal mounting plates attach to your BAAK license plate bracket on the motorcycle of your choice. They are available in 3 versions: For turn signals with øM8 stem For turn signals with øM10 stem For original/accessory Triumph turn signals (2016-...) Supplied with stainless steel...

View

Moto Guzzi

Leather tank strap for Moto Guzzi V7 III / V7 850 / V9

€135.00

Leather tank strap for Moto Guzzi V7 III, V9 and V7 850. This strap dresses your tank to give it a more refined look. It wraps around the tank and is adjusted using the nylon strap tightening buckle. Please select your motorcycle model correctly to receive a strap that fits. Available in black leather, aged brown, and gold to best match your machine....

View

Extension for Classic round motorcycle mirror ø10

Parts

Extension for Classic round motorcycle mirror ø10

€22.00

Aluminum extension for Classic round Mirror. This extension, compatible only with our Classic round Mirror, allows you to lengthen the mirror stem for improved rear visibility and offers greater adjustment options. It has the same finish as the mirror stem. This extension measures 55mm in length (center-to-center = 35mm). Sold individually.