Parts Short fork spring blocks €19.00 Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones. Add to cart
Parts Round 21W turn indicators €69.00 Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use. Add to cart
Parts Stainless steel collars for exhaust wrap €24.00 This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units. Add to cart
Parts Universal 1 button control €200.00 Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm... Add to cart
Parts Left 3-buttons universal switch €300.00 Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Add to cart
Parts Headlight struts €22.00 Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs. Add to cart
Parts Tracker bar handlebars €159.00 Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only. Add to cart
Parts Leather cable guides €8.00 Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a... Add to cart
Parts Mini 21W turn indicators €19.00 Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use. Add to cart
Parts Basic 10W turn indicators €22.00 Basic 10W turn signals. It has an M10 fixation shaft. The 10w bulb are included. Much more discreet than the original blinkers, it offers a better finish to your motorcycle. Blinkers measurements: 45x55mm. Sold in pairs. It's EU approved for road use. Add to cart
Parts Round mirror ø8 steel for motorcycle €39.00 Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides. Add to cart
Parts Bates headlight €75.00 Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model... Add to cart
Parts Biltwell Renegade handlebars grips €22.00 Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only. Add to cart
Parts Heritage headlight €99.00 Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model... Add to cart
Parts Biltwell Thruster handlebars grips €22.00 Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color. Add to cart
Parts Leather covered handlebar grips €145.00 Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars. Add to cart
Parts Motorcycle handlebar mounts, aluminum €96.00 Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France Add to cart
Parts Classic headlight €90.00 Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference... Add to cart
Parts Headlight bulb wiring extension €19.00 This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for... Add to cart
Parts Resistors for LED turn indicators €15.00 Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle. Add to cart
Parts Classic ø10 round aluminum motorcycle mirror €64.00 Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European... Add to cart
Parts Motorcycle mirror under handlebars round ø8 in steel €60.00 Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin... Add to cart
Parts Leather fork gaiters €240.00 Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with... Add to cart
Parts Extension for Classic ø10 round motorcycle mirror in aluminium €22.00 Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit. Add to cart
