V7 I & V7 II (2007-2017)

v7 i & amp; V7 II (2007-2017)

Showing 1-75 of 75 item(s)

Parts

Waterproof seat cover

This cover has been designed to protect your Baak leather seat or your original seat from rain and external elements when your motorcycle is parked. Waterproof, resistant to UV, heat and cold, it can be easily stored in its included carry bag and takes up very little space once folded. A subtle tone-on-tone Baak logo decorates the cover. Do not ride...

Universal Round LED Turn Signals in Aluminum - BAAK

Universal Round LED Turn Signals in Aluminum - BAAK 2

Parts

Turn signals Round - LED 5W version

€89.00

Discover our Round turn signals in LED version. Made from aluminum with a 40mm diameter, 5W LED bulbs and an M10 mounting stem. These universal turn signals feature a very fine finish, they are small enough to be discreet and elegant, yet large enough to deliver a vintage look perfectly neo-retro. This LED version provides compatibility with the...

Rear classic bare fender for Moto Guzzi V7 I / II and III

-20%

Moto Guzzi

Rear classic bare fender for Moto Guzzi V7 I / II and III

€151.20 €189.00

Time left

This Classic rear fender is delivered in a bare version: without accessories, to give you total freedom in customizing your motorcycle. It is made of stainless steel, and its design with a <strong=sculpted end gives it a raw and elegant classic look. It provides good protection against spray from the rear wheel. The integrated holes and supplied...

View

Side cover with number plate for Moto Guzzi V7 I/II

V7 I & V7 II (2007-2017)

Side cover with number plate for Moto Guzzi V7 I/II

€120.00

Number plate holder for Moto Guzzi V7 I/II Give your Moto Guzzi V7 I or V7 II a Tracker, Scrambler or Café Racer look with this side cover number plate holder in aluminium. The aluminium cover is offered in Brushed or Matte black epoxy finish; the number plate is always in brushed aluminium. This side cover replaces the original side cover. The kit...

View

Moto Guzzi

Rear fender wiring harness for Moto Guzzi

€19.00

Rear fender wiring harness for Moto Guzzi. This harness allows you to connect aftermarket turn signals + taillight on your Moto Guzzi. It is plug & play with your machine’s original terminals. Available in long or short length. Subject to sufficient cable length, we recommend the short length for mounting on the shock absorber axle and the long...

View

Classic front headlight ø180mm - Moto Guzzi V7

Parts

Classic front headlight ø180mm - Moto Guzzi V7

€110.00

Classic round front headlight for motorcycle Moto Guzzi V7 I, II, III, V7 850 and V9 with M8 side mounting and a diameter of ø180mm. It features a metal bowl and bezel, with a plastic lens, offering an exceptional level of finish. Its profiled bowl gives it a distinctly classic look. To choose the plug&play wiring harness, simply indicate whether...

View

Parts

Old School sticker sheet

€9.00

Printed on a UV-resistant vinyl, these Old School stickers are ready to withstand rain, heat and long journeys! Each design is precisely cut, with a glossy finish on a white background.Fairing, helmet, tank or toolbox, whatever the place, it sticks, it holds, and it tells a story. It’s a tribute to garage culture, to beautiful, authentic machines, and...

View

Classic front and rear fender pack Moto Guzzi V7

-20%
Pack

Moto Guzzi

Classic front and rear fender pack Moto Guzzi V7

€336.00 €420.00

Time left

Front and rear fender pack for Moto Guzzi V7 I, V7 II, V7 III and V7 850 Designed to give your Moto Guzzi V7 a retro, premium look while improving its usability, this Classic fender pack provides a more balanced profile, a timeless style and meticulous finishing.Made from stainless steel, the front and rear fenders combine strength, durability and...

View

Ignition switch relocation kit Moto Guzzi V7 I / II

V7 I & V7 II (2007-2017)

Ignition switch relocation kit Moto Guzzi V7 I / II

€39.00

Remote ignition switch bracket for Moto Guzzi V7 I / II. This kit allows you to relocate your key switch from its original position under the tank of your Moto Guzzi to clean up your cockpit. Relocating your key switch will disable your motorcycle's steering lock system.

Side cover with leather saddlebag for Moto Guzzi V7 I/II

V7 I & V7 II (2007-2017)

Side cover with leather saddlebag for Moto Guzzi V7 I/II

€273.00

Leather saddlebag for Moto Guzzi V7 I/II Add a touch of retro style and functionality to your Moto Guzzi V7 I or V7 II with this leather saddlebag. Discreet and elegant, it carries a few personal items while integrating perfectly with your bike's lines. Made from high-quality full-grain leather, the saddlebag is available in four finishes: Aged Brown,...

View

Round turn signals in aluminum 21W - BAAK

Round turn signals in aluminum 21W - BAAK 2

Parts

Turn signals Round 21W

€69.00

Mini Round turn signals in aluminum, 40mm diameter, with 21W bulbs and M10 mounting stem. These turn signals have a very fine finish for a subtler look than most stock indicators. Be careful to respect polarity when connecting: Black wire: + Black/white wire: - Sold in pairs. EU approved. Click here if you want the 5W LED version.

Parts

Mini turn signal LED mo.blaze Pin

€54.00

Mini motogadget LED turn signal 3W minimalist aluminium turn signal with an Ø8mm mounting stem. When off, these turn signals are almost invisible, while providing ideal brightness in operation. We use them on the majority of our custom projects. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your...

View

Universal

Micro turn signal LED mo.blaze Tens1

€49.42

Micro motogadget LED turn signal minimalist aluminum unit with Ø8mm mounting stem. The motogadget mo.blaze tens is one of the smallest certified turn signals in the world. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Finish choice in Black or polished Aluminum finish. Turn signal...

View

Parts

Universal VANS 22mm handlebar grips

€28.80

Vans handlebar grips right and left, for motorcycles. Featuring the classic waffle sole pattern of Vans® and made from ODI's exclusive grip compounds For 22mm diameter handlebars also available below in ø25mm. Supplied in pairs.

Side covers BAAK moto Guzzi V7 I & V7 II

-20%

Moto Guzzi

Side covers for Moto Guzzi V7 I & V7 II

€60.00 €75.00

Time left

Easy to fit, the side cover replaces the original plastic side cover on your motorcycle. It brings a higher level of finish to your Moto Guzzi. Sold individually, supplied with all necessary stainless steel fasteners. Order both left AND right sides if you want the pair.

View

-20%

Home

Universal reflector for license plate

€7.92 €9.90

Time left

Black finish, mounts on license plate bracket or directly on the license plate.

Classic ø10 round motorcycle mirror in aluminum, long stem

Classic ø10 round motorcycle mirror in aluminum, long stem 2

Parts

Classic round motorcycle mirror ø10 long stem

€66.00

The HIGHSIDER Pro MONTANA XL round motorcycle mirror combines elegance and practicality with a timeless design. Its black anodized finish, paired with a 175 mm articulated stem, provides improved rear visibility. Designed to enhance ergonomics and ensure a minimalist look, it fits vintage and custom motorcycles perfectly. Certified to European CE (E9)...

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish 2

Parts

LED motorcycle turn signals type Bullet black/brushed bezel

€78.00

Round LED 10W motorcycle turn signals, Bullet-style in black aluminum with brushed trim, simply beautiful. With a clear lens, they measure 20 mm in diameter and 36.5 mm in length. They install easily using a screw mounting (M8mm) and are compatible with a 12 V system. Delivered sleeved and with crimped Japanese round terminals ø3.2mm Approved to CE...

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Bar-end mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

The elegance of discretion. Designed for lovers of pure lines, this mirror in aluminum stands out for its profile of absolute thinness (only 5 mm thick). Its short stem and satin black finish allow it to blend with total sobriety on the handlebars of a Café Racer, a Scrambler or a characterful classic. A distinguished accessory that knows how to...

Parts

Front headlight wiring harness for Moto Guzzi

€27.00

This front headlight wiring harness for Moto Guzzi is compatible with models V7, V7 II, V7 III, and V7 850. Ideal for your motorcycle customization projects. Two options available for: Plug-and-play installation of an aftermarket front headlight. Converting a Moto Guzzi equipped with an OEM LED headlight to an adaptable bulb headlight. Sold...

View

Parts

Large rolled leather saddlebag

€897.00

Large rolled leather saddlebag, carefully handmade by our craftsmen. Highly detailed, this fine leatherwork piece is made with BAAK leathers and suede. The rolled saddlebag is compatible with ALL SW‑Motech SLC side brackets (motorcycle bracket not included). For everyday use or for your holidays. Available in Brown or Black finish, according to your...

View

Parts

Large satchel-style leather saddlebag

€897.00

Discover our removable satchel-style leather saddlebag, an exceptional piece hand-crafted by our French artisans. Every detail is meticulously executed, reflecting our commitment to quality. This sublime leatherwork creation is made from BAAK vegetable-tanned leathers of the highest quality. The rolled saddlebag is compatible with ALL SW-Motech SLC side...

View

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi 2

Parts

Turn Signals + Brake Light 3-in-1 - Full Black

€156.00

These elegant aluminium turn signals streamline your motorcycle. The rear turn signals integrate brake lights and position lights. The front turn signals are classic and only provide the turn signal function. Powerful lighting. Stem M8 ø, 38mm long, 22mm ø lens.

View

US license plate bracket with license plate light bracket

US license plate bracket with license plate light bracket 2

-20%

Parts

US license plate bracket with license plate light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (horizontal) license plates. It is made from 3mm thick aluminum, finished in satin black epoxy paint. This bracket allows mounting a license plate light. It is mandatory to purchase one of our license plate brackets offered by BAAK.

Parts

BAAK replacement silencer

€588.00

BAAK replacement exhaust silencers are sold in pairs with mounting brackets and bolts. Select your motorcycle model and we will craft these silencers to fit perfectly with BAAK headers. The muted tone remains the same, the finish matched.

View

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal dual-headlight headlight fairing draws its inspiration from 1980s trail bikes. Ideal for a Scrambler project, this fairing is designed by us and made from fiberglass. It includes an extension of the wiring harness and aluminum mounting brackets that attach to the fork tubes (ø39 - ø40mm / ø41 - ø42mm / ø43mm optional).We offer it in a raw...

View

License plate bracket for US side-mounted plate

License plate bracket for US side-mounted plate 2

-20%

Parts

License plate bracket for US side license plate

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (vertical) license plates mounted in a side position. It is made from 3mm-thick aluminum, painted with satin black epoxy paint. It is essential to purchase one of our BAAK side license plate brackets.

BAAK leather dye, ideal for motorcycle seats

Parts

Leather dye

€24.00

This leather coloring cream is a maintenance solution. It penetrates the leather and restores a deep black tone. You can use it for your seats but also for any other leather product: shoes, jackets, gloves, leather saddlebags, etc. Contents: 200 ml. Available for Black, Brown, Gold leather.Apply with a cloth, mixed with our maintenance cream (30% dye...

View

Leather handlebar grip pad (black, brown, gold, red) for motorcycle

Leather handlebar grip pad (black, brown, gold, red) for motorcycle 2

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Beyond the protection it provides in case of impact with your handlebar, this pad and its leather cover will give a more refined look to the front of your machine. Our craftsmen reinterpret the codes of off-road handlebar pads here to give them an aesthetic use. The inner diameter that contacts the crossbar is ø12mm, the...

View

Black aluminum headlight stays for motorcycle - BAAK

Black aluminum headlight stays for motorcycle - BAAK 2

Universal

Short universal headlight brackets for classic motorcycles

€129.00

Motorcycle headlight brackets, for M8 side-mounted headlight attachment, with optional turn signal mounts. Designed and manufactured in our BAAK workshop in France. Ideal for fitting a BAAK headlight and slimming the profile of your machine. Ø39 to 40mm and length 60mm for Moto Guzzi V7 I and II Ø41 to 42mm and length 50mm for Triumph Bonneville T100,...

View

Parts

Universal license plate lighting

€18.00

LED license plate light. This license plate light is approved to European ECE standards (12V / 2W). We use it on some of the license plate brackets manufactured at the BAAK workshop. License plate light dimensions: Length 17mm Diameter 12mm Mounting stem øM8.

Aluminum turn signal brackets for license plate bracket

Aluminum turn signal brackets for license plate bracket 2

Parts

Turn signal brackets on license-plate bracket - Universal

€30.00

Turn signal brackets for license plate mount. These stainless steel turn signal mounting plates attach to your BAAK license plate bracket on the motorcycle of your choice. They are available in 3 versions: For turn signals with øM8 stem For turn signals with øM10 stem For original/accessory Triumph turn signals (2016-...) Supplied with stainless steel...

View

Extension for Classic round motorcycle mirror ø10

Parts

Extension for Classic round motorcycle mirror ø10

€22.00

Aluminum extension for Classic round Mirror. This extension, compatible only with our Classic round Mirror, allows you to lengthen the mirror stem for improved rear visibility and offers greater adjustment options. It has the same finish as the mirror stem. This extension measures 55mm in length (center-to-center = 35mm). Sold individually.

High front fender Scrambler for Moto Guzzi V7I and V7II

High front fender Scrambler for Moto Guzzi V7I and V7II 2

-20%

V7 I & V7 II (2007-2017)

Front fender Scrambler for Moto Guzzi V7I / V7II

€228.00 €285.00

Time left

High front fender Scrambler for Moto Guzzi V7I and V7II. Handcrafted in stainless steel, this high front fender mounts to your V7’s original lower triple clamp using the supplied satin black mounting plate. It provides solid protection and a bold off-road look for your machine. Available in Satin Black, Gloss Black, Brushed, Polished. Dimensions:...

View

Moto Guzzi

Side plate bracket for Moto Guzzi

€95.00

Side-mounted license plate holder for Moto Guzzi V7 and V9. This license plate holder mounts to the upper left shock absorber mount of your motorcycle. Finished in satin black epoxy and supplied with a plug & play wiring harness. You can optionally choose turn signal brackets mounted on the shock absorber mounts.

View

Parts

Bates headlight bracket

€30.00

Bates headlight mounting bracket, essential for fitting a lower-mounted front headlight. Made from 4mm thick aluminium. Supplied with stainless steel fasteners. Ø6mm mounting hole centers from 68mm to 95mm Bates headlight mounting Ø10mm

Moto Guzzi

Front turn signal bracket for Moto Guzzi V7 / V9

€30.00

Front turn signal bracket for Moto Guzzi V7 and V9, simple, effective and above all very discreet. Made from laser-cut stainless steel and painted in satin black epoxy. This bracket mounts on the upper screw of your regulator. Sold without turn signal.

View

Moto Guzzi

Rear turn signal bracket for Moto Guzzi (on shock absorber studs)

€30.00

Rear turn signal brackets for Moto Guzzi. These turn signal ears allow you to mount your turn signals on the upper shock mounts of your Moto Guzzi for a more discreet look. Supplied in pairs. Available for Moto Guzzi V7I, V7 II, V7 III, V7 850 and V9.

View

Parts

Fork gaiters in leather

€240.00

Pair of genuine leather fork gaiters. Handmade in France, they bring a touch of authenticity and distinction to your machine. These 4-, 5-, 6- or 8-pleat gaiters are water-repellent and specially treated to withstand intensive use. Available in several leather finishes. Diameter Ø41mm at the top and Ø63mm at the bottom. Supplied as a pair, with four...

View

Parts

Leather Racer seat for Moto Guzzi V7

€690.00

This leather seat Racer for two changes the look of your Moto Guzzi V7I, V7II and V7III without giving up on comfort. With its café racer styling, it redefines the bike's lines and endures — from daily rides to long outings. The double-tanned leather does not wear out, it develops a patina: the seat gains character as the miles add up. Leather that ages...

View

Moto Guzzi

Heritage leather seat for Moto Guzzi V7

€717.60

This leather saddle Heritage changes the look of your Moto Guzzi V7I, V7II and V7III without compromising on comfort. Narrower than the original, the shape of its padding gives it a less bulky, flatter appearance. It redefines the machine’s profile and endures, from daily rides to long outings. The

View

Moto Guzzi

Classic leather seat for Moto Guzzi V7

€720.00

This leather saddle changes the look of your Moto Guzzi V7I, V7II and V7III without sacrificing comfort. Narrower than the original, it offers a cleaner silhouette, redefines the bike’s lines and endures from daily commutes to long rides. The double-tanned leather does not wear out, it develops a patina: the saddle gains presence as the miles accumulate....

View

Moto Guzzi

Leather tank strap for Moto Guzzi V7 I / II

€144.00

Leather tank strap for Moto Guzzi V7 I and V7 II. It dresses your tank and gives it a refined look. The strap fastens easily to the fuel cap using two aluminum plates. An adjustable nylon strap allows you to wrap around your tank and secure this strap. Available in black leather, aged brown, and gold to best match your machine. All necessary stainless...

View

Parts

Mini universal leather saddlebag

€162.00

Mini universal leather saddlebag. Handcrafted in our workshop, it allows you to carry a few items while giving your machine a retro look. It is available in aged brown leather, gold, black or chocolate. It is particularly suitable for mounting on the original battery-side cover of Royal Enfield Classic / Bullet 500 (cover to be drilled). The rear is...

View

Parts

Medium universal leather saddlebag

€174.00

Universal Medium leather saddlebag. Handmade in our workshop, it allows you to carry a few items while giving your machine a retro look. It is available in aged brown leather, black, gold or ruby. The rear is pre-drilled with 4 holes (120mm spacing) to easily fit your motorcycle. Saddlebag dimensions: 20cm x 20cm x 7cm. Supplied with 4 M5x14...

View

Mini under-handlebar round motorcycle mirror ø8 in steel

Mini under-handlebar round motorcycle mirror ø8 in steel 2

Parts

Round under-bar motorcycle mirror ø8

€45.00

Mini motorcycle mirror black steel Ø80mm specially designed to be mounted in the lower position, under your handlebar. It offers a discreet look and reliable visibility thanks to its wide-angle glass. Available Without adapter (for 8mm through-rod mounting) or with Adapter for 22mm handlebars. Sold individually.

View

Parts

Classic round motorcycle mirror ø10

€64.00

Round motorcycle mirror Classic in aluminum. This black mirror with a Ø10cm glass offers an impeccable finish while remaining discreet. It provides perfect rear visibility and fits any motorcycle. Adjustable in height thanks to its 150mm articulated stem. Supplied with two adapters (left-hand and right-hand thread M10x1.25 mm). Additional adapters...

View

Parts

Resistors for LED turn signals

€15.00

Resistors for LED turn signals, essential to obtain a normal turn signal flash rate once your LED turn signals are fitted to a motorcycle that did not come equipped with them originally. Supplied in pairs. You need 2 pairs to equip the front and rear of your motorcycle.

Parts

Headlight wiring harness extension

€19.00

This headlight bulb extender is compatible with any motorcycle fitted with an H4 bulb. It allows you to reconnect your headlight to the machine if you relocate part of the original wiring harness. Length: 420mm. Handcrafted at the BAAK workshop. This extender is supplied by default with all headlights for Triumph, Moto Guzzi and Royal Enfield.

Classic vintage motorcycle handlebar clamps for cafe racer in aluminum

Classic vintage motorcycle handlebar clamps for cafe racer in aluminum 2

Parts

Handlebar risers motorcycle - universal

€96.00

Machined aluminum handlebar clamps for motorcycles. Available in diameters ø22mm, ø28.6mm or 1 inch (ø25.4mm), these machined aluminum clamps are lightweight and elegant. They are finished in high-quality satin black epoxy, machined from solid and delivered with stainless steel fasteners (size options available) Designed and manufactured by the BAAK...

View

Parts

Leather handlebar grips

€145.00

Leather handlebar grips. Wrapped in high-quality leather, they add a touch of elegance to your machine while maintaining a secure grip. Available in black leather, aged brown, gold. Four thread colors available to perfectly match your bike. For 1" (ø25.4mm) or ø22mm diameter handlebars. Supplied in pairs

View

Parts

Biltwell Thruster handlebar grips

€22.00

Handlebar grips Biltwell Thruster right and left, for characterful motorcycles. Provide a secure grip on the bars, perfect comfort and a look unmatched from stock. For 1" (25.4mm) or ø22mm diameter handlebars. Supplied in pairs.

View

Parts

Biltwell Renegade handlebar grips

€22.00

Handlebar grips Biltwell Renegade right and left, for characterful motorcycles. Provide a secure hold on the bars, perfect comfort and a look unmatched by the original. For 1" (ø25.4mm) or ø22mm handlebars. Supplied in pairs. Available in black only.

View

Parts

Heritage headlight

€99.00

Heritage front headlight for motorcycle. This side-mount M8 headlight measures ø180mm in diameter. Bowl and bezel in metal, its lens is plastic. This headlight offers an exceptional level of finish; its flat bowl will give your machine a more compact look. It is offered with a Brushed or Chrome bezel. Our universal headlight protection grille fits this...

View

Classic Front Headlight ø180mm - Universal

Parts

Classic Front Headlight ø180mm - Universal

€90.00

Round front headlight for classic motorcycles, with M8 side mounting and a diameter of ø180mm. It features a metal bucket and bezel, with a plastic lens, providing an exceptional level of finish. Its profiled bucket gives it a decidedly classic look. Depending on the chosen motorcycle model, a plug-and-play wiring harness is supplied (which may explain a...

View

Parts

Bates front headlight

€75.00

Bates-style headlight for motorcycle. This lower-mounted headlight measures ø15cm in diameter. Bowl and rim in metal. Discreet, it enhances the machine's look. This headlight is available in Brushed, Chrome, Satin Black, or Satin Black with Brushed or Chrome rim. It is supplied with the mounting plate adapted to the chosen motorcycle model. EU approved.

View

Parts

Round motorcycle mirror ø8

€45.00

Mini mirror in steel with a Ø8cm diameter and M8 thread, ideal for a high position. The mirror stem measures 13cm long; its bend is specifically designed to ensure good rear visibility while remaining discreet. Sold individually, available in satin black only. Suitable for mounting on the right or left side.

View

Parts

Oval 3W Universal LED Turn Signals

€19.80

Universal oval LED turn signals in plastic with a total length of 60mm and M10 mounting stem. These turn signals feature a very nice finish, for a more discreet look than most stock indicators. They offer unbeatable value without compromising the style of your motorcycle. Sold in pairs. EU approved.

Parts

Leather cable-guide strap

€8.00

Leather cable strap. This leather strap lets you secure your cables together or attach them to your handlebar. If, like us, the finish of your machine is one of your obsessions, this strap is ideal for your project. Available in Aged Brown leather, Black and Gold. Available in lengths 80mm, 90mm, 115mm, 130mm. Width 20mm. Sold individually, not in pairs.

View

-15%

Parts

Tracker bar handlebars

€135.15 €159.00

Time left

Tracker bar handlebar, made from aluminium. This handlebar has a diameter of ø28.6mm at the clamp area and ø22mm at the grips. It offers a pleasing sweep back towards the rider, ensuring a comfortable riding position. Available only in a high‑quality satin black epoxy paint finish. Satin black epoxy on this type of part is far more elegant and refined...

View

Parts

Flat Track Handlebar Ø22mm

€90.00

Flat Track Handlebar with ø22mm diameter. Made of steel, it offers a cooler riding position and an enhanced look. The strong sweep of this handlebar back toward the rider and its pure Flat Track styling will ensure better handling of your machine and great comfort. Available in Ø22mm diameter with Chrome or Brushed finish.

View

Front mini fender for Moto Guzzi V7 and V9

-20%

Moto Guzzi

Front mini fender for Moto Guzzi V7 and V9

€132.00 €165.00

Time left

Front fender Mini for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. This very short front fender will visually lighten the front of your machine. It is pre-drilled to fit your original fender's mounting system. This Medium front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Classic Mini front fender for Moto Guzzi V7

-20%

Moto Guzzi

Classic Mini front fender for Moto Guzzi V7

€86.40 €108.00

Time left

Classic Mini front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molded edges at its ends give it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Front fender Classic Medium for Moto Guzzi V7

-20%

Moto Guzzi

Front fender Classic Medium for Moto Guzzi V7

€96.00 €120.00

Time left

Classic Medium front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molding at its ends gives it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Classic rear fender for Moto Guzzi V7 I / II and III

-20%

Moto Guzzi

Classic rear fender for Moto Guzzi V7 I / II and III

€240.00 €300.00

Time left

Classic rear fender for Moto Guzzi V7 I, V7 II and V7 III. Made of stainless steel, its molded end gives it a raw yet elegant classic look. It provides good protection against spray from the rear wheel. Equipped with an LED taillight (CE approved), license plate illumination, a choice of plate bracket (side or rear), choice of rear turn signal mounts, a...

View

Parts

Headlight spacers

€22.00

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Parts

Leather care cream

€18.00

This leather care cream is a nourishing milk. It penetrates and feeds the leather. You can use it for your seats but also for any other leather item: shoes, jacket, gloves, leather saddlebags, etc. Capacity: 100 ml.

Parts

Clamps for exhaust wrap

€24.00

This set of 8 self-locking stainless steel clamps will allow you to properly attach the heat wrap to your exhaust. Don’t tell us you were just going to do that with twisted wire. Supplied as 8 units.

Fork lowering shims for Triumph and Moto Guzzi

Fork lowering shims for Triumph and Moto Guzzi 2

-15%

Parts

Fork lowering shims for Triumph and Moto Guzzi

€16.15 €19.00

Time left

Short fork spring shims. To fit our short shocks and lower the front of your Triumph or Moto Guzzi proportionally, you will need these short fork spring shims. These shims are 2 cm shorter and replace the original shims.

View

Moto Guzzi

Starter cover for Moto Guzzi V7 and V9

€55.00

Starter cover for Moto Guzzi V7 and V9. Made from aluminum, this starter cover simply mounts over the part to dress it. Available in Satin Black (epoxy) or Brushed finish. This cover is compatible with the Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9. Designed and manufactured by our team in France.

View

Parts

Heat wrap

€93.60

Here are 15 metres of 5cm-wide exhaust wrap to swaddle your exhaust and give you a BAD BOY look! For the black colour, it is strongly recommended to paint it with a high-temperature special paint; otherwise the colour will not hold long and your exhaust wrap will turn grey. Premium quality wrap — beware of low-cost imitations! The 8 stainless steel...

View

Parts

Turn signal bulbs 21W

209-405

€9.00

Transparent turn signal bulbs for mini turn signals, 21 Watt 12 Volt. Supplied in pairs.

Parts

H4 bulb (yellow)

€12.00

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.

2Win shock absorbers for Moto Guzzi V7I / V7II

2Win shock absorbers for Moto Guzzi V7I / V7II 2

V7 I & V7 II (2007-2017)

2Win shock absorbers for Moto Guzzi V7I and V7II

€517.20

2Win shocks for Moto Guzzi V7 I and V7 II. These shocks are adjustable for spring preload and hydraulic damping. Each click of the knob changes the compression and rebound damping settings simultaneously. They are very simple to use. BAAK developed with its manufacturer a version shorter than the original to give a more compact look without losing...

View

Parts

Mirror adapter

€15.00

Improve your visibility with our BAAK handlebar mirror adapters Discover BAAK solutions to mount your mirrors safely and with style. We offer two types of handlebar adapters, designed to meet different needs and motorcycle configurations: Handlebar adapter ø22mm: Ideal for fitting our BAAK mini mirrors in the under-handlebar position. This discreet and...

View