Moto Guzzi

Showing 109-120 of 122 item(s)

Classic rear fender for Moto Guzzi V7 I / II and III

Classic rear fender for Moto Guzzi V7 I / II and III 2

-20%

Moto Guzzi

Classic rear fender for Moto Guzzi V7 I / II and III

€240.00 €300.00

Time left

Classic rear fender for Moto Guzzi V7 I, V7 II and V7 III. Made of stainless steel, its molded end gives it a raw yet elegant classic look. It provides good protection against spray from the rear wheel. Equipped with an LED taillight (CE approved), license plate illumination, a choice of plate bracket (side or rear), choice of rear turn signal mounts, a...

View

Batte headlight fixing for Moto Guzzi V9

Batte headlight fixing for Moto Guzzi V9 2

V9 (2016-2024)

Bates headlight mount for Moto Guzzi V9

Bates headlight mounting bracket for Moto Guzzi V9, required to fit a lower-mount (Bates-style) headlight on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish. This plate is supplied by default with our Bates Front Headlight kits for Moto Guzzi V9. Supplied with the necessary stainless steel fasteners.

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mount for Moto Guzzi V7 III and V7 850 2

V7 III (2017-2022)

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mounting bracket for Moto Guzzi V7 III and V7 850, essential to fit a lower-mount headlight (Bates type) on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish.

Headlight spacers

Headlight spacers 2

Parts

Headlight spacers

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Leather care cream

Leather care cream 2

Parts

Leather care cream

This leather care cream is a nourishing milk. It penetrates and feeds the leather. You can use it for your seats but also for any other leather item: shoes, jacket, gloves, leather saddlebags, etc. Capacity: 100 ml.

Clamps for exhaust wrap

Clamps for exhaust wrap 2

Parts

Clamps for exhaust wrap

This set of 8 self-locking stainless steel clamps will allow you to properly attach the heat wrap to your exhaust. Don’t tell us you were just going to do that with twisted wire. Supplied as 8 units.

Fork lowering shims for Triumph and Moto Guzzi

Fork lowering shims for Triumph and Moto Guzzi 2

-15%

Parts

Fork lowering shims for Triumph and Moto Guzzi

€16.15 €19.00

Time left

Short fork spring shims. To fit our short shocks and lower the front of your Triumph or Moto Guzzi proportionally, you will need these short fork spring shims. These shims are 2 cm shorter and replace the original shims.

View

Starter cover for Moto Guzzi V7 and V9

Starter cover for Moto Guzzi V7 and V9 2

Moto Guzzi

Starter cover for Moto Guzzi V7 and V9

Starter cover for Moto Guzzi V7 and V9. Made from aluminum, this starter cover simply mounts over the part to dress it. Available in Satin Black (epoxy) or Brushed finish. This cover is compatible with the Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9. Designed and manufactured by our team in France.

View

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9 2

Moto Guzzi

Monza-style fuel cap for Moto Guzzi V7III & V9

Monza fuel tank cap for Moto Guzzi V7 III and V9. The timeless design of this Monza cap will suit your fuel tank perfectly thanks to our adapter. The complete kit includes the polished aluminum gas cap, the gasket, the necessary screws and the adapter. Fits only Moto Guzzi V7 III and V9. Beware of poor-quality copies of this fuel tank cap!

Thermal wrap

Thermal wrap 2

Parts

Heat wrap

Here are 15 metres of 5cm-wide exhaust wrap to swaddle your exhaust and give you a BAD BOY look! For the black colour, it is strongly recommended to paint it with a high-temperature special paint; otherwise the colour will not hold long and your exhaust wrap will turn grey. Premium quality wrap — beware of low-cost imitations! The 8 stainless steel...

View

Turn signal bulbs 21W

Parts

Turn signal bulbs 21W

Transparent turn signal bulbs for mini turn signals, 21 Watt 12 Volt. Supplied in pairs.

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 bulb (yellow)

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.

1
…
9
10
11

Moto Guzzi