Scrambler 1200 x/xc/xe

Showing 1-15 of 15 item(s)

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE 2

-35%

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

€128.70 €198.00

Side covers for Triumph Scrambler 1200 XC/XE in aluminium. Attaches to replace the original side covers of your Triumph 1200 XC or XE.

View

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look 2

-35%

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€128.70 €198.00

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

View

Aventures leather seat for Triumph Scrambler 1200 XE/XC

Aventures leather seat for Triumph Scrambler 1200 XE/XC 2

Parts

Aventures leather seat for Triumph Scrambler 1200 XE/XC

Aventures Leather Seat for Triumph Scrambler 1200 XC/XE. Made of turned leather. Replace the original seat of your Triumph 1200 XC or XE. Recommended height of the pilot: from 6,2 feet tall 50 mm higher than the original seat.

View

Heritage leather seat for Triumph Scrambler 1200 XC/XE

Heritage leather seat for Triumph Scrambler 1200 XC/XE 2

Parts

Heritage leather seat for Triumph Scrambler 1200 XC/XE

Heritage Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE. Recommended height of the pilot: from 6,2 feet tall

View

Large Leather Roll Top Pannier

Large Leather Roll Top Pannier 2

-15%

Parts

Large Leather Roll Top Pannier

€762.45 €897.00

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

View

Large Leather Messenger Bag

Large Leather Messenger Bag 2

-15%

Parts

Large Leather Messenger Bag

€762.45 €897.00

Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this...

View

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

View

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

€54.40 €64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€18.70 €22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Classic ø10 round motorcycle mirror in aluminum, long stem

Classic ø10 round motorcycle mirror in aluminum, long stem 2

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

€29.25 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Rear fender removal kit Triumph 1200 Scrambler X-XE-XC

Rear fender removal kit Triumph 1200 Scrambler X-XE-XC 2

Parts

Rear fender removal kit Triumph 1200 Scrambler X-XE-XC

Currently unavailable Do you want to streamline the rear of your Triumph 1200 Scrambler XC/XE/X? This fender eliminator with license plate holder allows you to completely remove the stock mudguard. Made of aluminum and stainless steel, the kit comes with an approved LED taillight and license plate lighting. A plug-and-play adapter harness makes...

View

Mini 21W turn indicators

Mini 21W turn indicators 2

Parts

Mini 21W turn indicators

Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use.

Trail engine guard - Triumph 1200 XE-XC

Trail engine guard - Triumph 1200 XE-XC 2

New

Home

Trail engine guard - Triumph 1200 XE-XC

Aluminum Trail Skid Plate for Triumph Scrambler 1200 XE-XC In addition to giving your Scrambler an adventurous look, this skid plate provides effective protection for the lower engine in all conditions. Made of 4 mm thick aluminum, it provides a real shield against splashes, stones, and impacts associated with aggressive off-road riding. Easy to install,...

View