V7 850

Showing 73-83 of 83 item(s)

Flat Track handlebars Ø22mm

Flat Track handlebars Ø22mm 2

Parts

Flat Track Handlebar Ø22mm

Flat Track Handlebar with ø22mm diameter. Made of steel, it offers a cooler riding position and an enhanced look. The strong sweep of this handlebar back toward the rider and its pure Flat Track styling will ensure better handling of your machine and great comfort. Available in Ø22mm diameter with Chrome or Brushed finish.

View

Front mini fender for Moto Guzzi V7 and V9

Front mini fender for Moto Guzzi V7 and V9 2

Moto Guzzi

Front mini fender for Moto Guzzi V7 and V9

Front fender Mini for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. This very short front fender will visually lighten the front of your machine. It is pre-drilled to fit your original fender's mounting system. This Medium front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Classic Mini front fender for Moto Guzzi V7 and V9

Classic Mini front fender for Moto Guzzi V7 and V9 2

Moto Guzzi

Classic Mini front fender for Moto Guzzi V7 and V9

Classic Mini front fender for Moto Guzzi V7 I, V7 II, V7 III, V9 and V7 850, made from stainless steel. Molded edges at its ends give it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Front fender Classic Medium for Moto Guzzi V7 and V9

Front fender Classic Medium for Moto Guzzi V7 and V9 2

Moto Guzzi

Front fender Classic Medium for Moto Guzzi V7 and V9

Classic Medium front fender for Moto Guzzi V7 I, V7 II, V7 III, V9 and V7 850, made from stainless steel. Molding at its ends gives it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mount for Moto Guzzi V7 III and V7 850 2

V7 III (2017-2022)

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mounting bracket for Moto Guzzi V7 III and V7 850, essential to fit a lower-mount headlight (Bates type) on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish.

Headlight spacers

Headlight spacers 2

Parts

Headlight spacers

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Clamps for exhaust wrap

Clamps for exhaust wrap 2

Parts

Clamps for exhaust wrap

This set of 8 self-locking stainless steel clamps will allow you to properly attach the heat wrap to your exhaust. Don’t tell us you were just going to do that with twisted wire. Supplied as 8 units.

Starter cover for Moto Guzzi V7 and V9

Starter cover for Moto Guzzi V7 and V9 2

Moto Guzzi

Starter cover for Moto Guzzi V7 and V9

Starter cover for Moto Guzzi V7 and V9. Made from aluminum, this starter cover simply mounts over the part to dress it. Available in Satin Black (epoxy) or Brushed finish. This cover is compatible with the Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9. Designed and manufactured by our team in France.

View

Thermal wrap

Thermal wrap 2

Parts

Heat wrap

Here are 15 metres of 5cm-wide exhaust wrap to swaddle your exhaust and give you a BAD BOY look! For the black colour, it is strongly recommended to paint it with a high-temperature special paint; otherwise the colour will not hold long and your exhaust wrap will turn grey. Premium quality wrap — beware of low-cost imitations! The 8 stainless steel...

View

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 bulb (yellow)

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.

Ø22mm handlebar rear view mirror

Ø22mm handlebar rear view mirror 2

Parts

Mirror adapter

Improve your visibility with our BAAK handlebar mirror adapters Discover BAAK solutions to mount your mirrors safely and with style. We offer two types of handlebar adapters, designed to meet different needs and motorcycle configurations: Handlebar adapter ø22mm: Ideal for fitting our BAAK mini mirrors in the under-handlebar position. This discreet and...

View

1
2
3
4