Bonneville T100 (2016 -...)

Showing 1-24 of 32 item(s)

rear fender removal kit Triumph 2016-...

rear fender removal kit Triumph 2016-... 2

Parts

rear fender removal kit Triumph (after 2016)

Do you want to clean up the rear of your Triumph Bonneville T100/T120, ST900 or Scrambler 900? This fender eliminator with license plate bracket lets you completely remove the original fender. Made from aluminium and stainless steel, the kit is supplied with a road-legal LED taillight and license plate illumination. A plug&play adaptation wiring...

View

Parts

Flat tank cap for Triumph

€58.00

Finish in black only, without a locking system. Made with a black anodized treatment for lasting durability and impeccable style. This product has been carefully selected by the BAAK workshop team for its elegant aesthetic and superior quality. It installs easily as a direct replacement for the original cap.

With bracket for relocated switch only 2

Parts

Flat triple clamp for Triumph T100/T120

€600.00

Transform your Triumph T100/T120 with this flat machined-aluminium triple clamp. Satin black finish thanks to a high-quality epoxy paint, and supplied with a pair of risers of your choice. This triple clamp lowers your motorcycle by 25mm at the front, so it is recommended to adjust your shocks or choose our lowering kit. It is also compatible with the...

View

US license plate bracket with license plate light bracket

US license plate bracket with license plate light bracket 2

-20%

Parts

US license plate bracket with license plate light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (horizontal) license plates. It is made from 3mm thick aluminum, finished in satin black epoxy paint. This bracket allows mounting a license plate light. It is mandatory to purchase one of our license plate brackets offered by BAAK.

Engine guard BAAK for Triumph T100/ T120

Engine guard BAAK for Triumph T100/ T120 2

-20%

Parts

Engine guard TRAIL for Triumph T100/ T120

€116.00 €145.00

Time left

Aluminum engine guard Trail for Triumph T100/T120 (2016-…) with an adventurer look for the best protection.

License plate bracket for US side-mounted plate

License plate bracket for US side-mounted plate 2

-20%

Parts

License plate bracket for US side license plate

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (vertical) license plates mounted in a side position. It is made from 3mm-thick aluminum, painted with satin black epoxy paint. It is essential to purchase one of our BAAK side license plate brackets.

Triumph

Brembo brake pads for Triumph

€51.80

Front brake pads Brembo for Triumph. Softer than the original, these front brake pads made from quality materials will ensure consistently reliable braking, both cold and at high temperatures. The friction coefficient is higher than your original pads, which provides excellent braking performance and increased safety on the road. The kit includes 2 pads...

-20%

Triumph

Classic Mini front fender for Triumph

€86.40 €108.00

Time left

Front Classic Mini Fender for Triumph, made from stainless steel. The mouldings at its ends give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. You can reuse the original fasteners. This Front Classic fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France....

View

High front fender Scrambler for Triumph (2016-...)

-20%

Triumph

Front fender Scrambler for Triumph (after 2016)

€228.00 €285.00

Time left

High front fender Scrambler for Triumph (2016-... liquid-cooled). Handmade, this stainless steel high front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in finishes Glossy black varnish, Satin black, Brushed, Polished,...

View

BAAK injection cover for Triumph T100, Street Twin and Street Scrambler

-20%

Triumph

Injection cover for Triumph 900 (after 2016)

€52.00 €65.00

Time left

Pair of aluminium injection covers for Triumph (2016-...). These covers replace the originals and will give your machine a more refined look. They are compatible with Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). Supplied as a pair, with all necessary stainless steel fasteners. Available in Satin Black and Brushed finish. Not compatible...

View

Triumph

Regulator bracket for Triumph (after 2016)

€45.00

Regulator bracket plate for Triumph (2016-...). This bracket allows you to relocate your regulator behind the radiator rather than on the upper triple clamp to visually streamline your machine. Made from stainless steel, laser-cut. Its installation requires relocating your wiring harness under the tank. Supplied without regulator, with the necessary...

Triumph

Side license plate bracket for Triumph

€95.00

Side-mounted license plate holder for Triumph. This aluminium license plate holder mounts to the upper left shock absorber mount. Supplied with a plug-and-play wiring harness, making the accessory easy to install. Finished in satin black epoxy paint. You can optionally choose turn signal brackets mounted on the shock absorber mounts. License plate...

View

Ignition switch relocator for Triumph (after 2016)

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

Triumph

Front turn signal bracket for Triumph

€30.00

Front turn signal bracket for Triumph, simple, effective and above all very discreet. Made of laser-cut stainless steel and painted in satin black epoxy. Matches our Regulator bracket for Triumph, or can be bolted to the upper mount of your oil cooler. This bracket is compatible with classic Triumphs older models (pre-2016) and newer models (2016-...)....

Triumph

Rear turn signal bracket for Triumph (on shock absorber studs)

€30.00

Rear turn signal brackets for Triumph. This pair of brackets allows you to mount your turn signals on the upper shock axle for a more discreet look. Compatible with your Triumph's original passenger handle. Please select the correct motorcycle model to receive brackets adapted to your shock axle. Length 50mm. Supplied in pairs.

View

Parts

Fork gaiters in leather

€240.00

Pair of genuine leather fork gaiters. Handmade in France, they bring a touch of authenticity and distinction to your machine. These 4-, 5-, 6- or 8-pleat gaiters are water-repellent and specially treated to withstand intensive use. Available in several leather finishes. Diameter Ø41mm at the top and Ø63mm at the bottom. Supplied as a pair, with four...

View

Triumph

Engine guard for Triumph (after 2016)

€115.00

Engine guard made of stainless steel. It will give a bolder look to your Triumph (2016-...). With a thickness of 1.5mm, it provides good protection for your engine against impacts and debris thrown up by the front wheel. Available in satin black or brushed finish. Supplied with a screw kit for installation.

View

Triumph

Side cover with number plate for Triumph (after 2016)

€120.00

Side license plate holder for Triumph (2016-…) in aluminum. The brushed number plate is mounted on an aluminum side cover that replaces the original cover, delivered with all necessary fasteners. Available for right or left side, with side cover in Brushed or Satin Black finish. BAAK exclusive. Made in France

View

Headlight brackets for original Triumph headlight (after 2016)

-20%

Triumph

Headlight brackets for original Triumph headlight (after 2016)

€103.20 €129.00

Time left

Mounting brackets for original Triumph headlight (since 2016). This pair of headlight brackets replaces the originals to reveal the fork tubes. Compatible with the original headlight of T100 / T120 / Street Scrambler / Street Twin / Thruxton 1200 (since 2016). Available with turn signal brackets for Universal turn signals or original Triumph turn signals...

View

Triumph

Front fender mounting brackets for Triumph (after 2016)

€45.00

Front fender mounting brackets for Triumph (2016-... - liquid-cooled) in stainless steel. These mounting brackets allow you to adjust the height of your fender and guide cables along the fork. Particularly useful if you change the diameter of your front wheel. Supplied in pairs, fender not included. Made in France

View

Triumph

Wide triple clamp kit for Triumph T100-T120 (after 2016)

€1,200.00

Wide triple tree kit for Triumph T100 / T120 (2016-... - liquid cooled), allowing fitment of a wide front tyre (3.50). The kit includes upper and lower triple trees widened by 20mm, the lower bearing, disc spacers, clamps and axle. It allows a 25mm lowering of the front. This kit is notably used on our Triumph Bonneville T120 Bobber. We recommend...

View

Triumph

Short leather seat kit for Triumph (after 2016)

€1,290.00

Short leather seat kit for Triumph Bonneville T100, T120, Street Twin and Street Scrambler (2016-... - liquid cooled). This kit provides a shortened leather seat for a more compact look while retaining 2 comfortable places for riding two-up. Supplied with its assembly instructions. It includes: Seamless system buckle in aluminium Short leather seat...

View

-15%

Triumph

Lowering kit for Triumph (After 2016)

€1,071.00 €1,260.00

Time left

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We...

View

Classic Medium front mudguard for Triumph

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View