Back end

Showing 73-96 of 110 item(s)

BAAK License plate lightning

BAAK License plate lightning 2

Parts

License plate lightning

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Short leather seat kit for Royal Enfield 650 Interceptor / Continental GT

Short leather seat kit for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Classic short leather seat kit for Royal Enfield 650 Interceptor / Continental GT

Short leather seat kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). This kit shortens the original seat length by 12cm to get a more compact look and the elegance of a leather seat, while keeping two seaters space. It includes: Screwed subframe (no welding required) with cutting template Genuine leather short seat Stainless steel rear...

Gallinella rear fairing rear for Royal Enfield 650 Interceptor / Continental GT

Gallinella rear fairing rear for Royal Enfield 650 Interceptor / Continental GT 2

Royal Enfield

Gallinella fairing kit for Royal Enfield 650 Interceptor / Continental GT

Gallinella rear fairing kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). Turn this kit into the masterpiece of your custom project and make your Royal Enfield stand out from the mass. This kit includes: Screwed short subframe with cutting template Short leather seat Gallinella fiber fairing License plate holder, taillight (trim ring...

Rear turn indicators brackets for Royal Enfield by BAAK

Rear turn indicators brackets for Royal Enfield by BAAK 2

Royal Enfield

Rear turn indicators brackets for Royal Enfield

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

Trail rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Trail rear mudguard for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Trail rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Trail rear mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel by our craftsmen in France. It's THE mudguard for adventurers, the ones used on our Royal Enfield 650 Interceptor BAAK Aventures. It's shorter than the original mudguard, while providing an efficient protection against the rear wheels...

View

License plate holder for US format side license plates

License plate holder for US format side license plates 2

Parts

License plate holder for US format side license plates

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Flat leather seat for Royal Enfield Interceptor / Continental GT

Flat leather seat for Royal Enfield Interceptor / Continental GT 2

Parts

Flat leather seat for Royal Enfield Interceptor / Continental GT

Flat leather seat for Royal Enfield Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on an original Royal Enfield seat pan so it perfectly fits your motorcycle. The shape of the leather cover makes it look very thin while keeping a good seating comfort. It's available in Aged brown, Black,...

License plate holder for US format with rear light mount

License plate holder for US format with rear light mount 2

Parts

License plate holder for US format with rear light mount

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

License plate holder for US format

License plate holder for US format 2

Universal

License plate holder for US format

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK license plate holders.

License plate holder for US format with light mount

License plate holder for US format with light mount 2

Parts

License plate holder for US format with light mount

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Rear mudguard for Bobber 1200

Rear mudguard for Bobber 1200 2

Triumph

Rear mudguard for Bobber 1200 Triumph

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

Turn indicators / Brake light

Turn indicators / Brake light 2

Parts

Turn indicators / Brake light

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical.

Rear BAAK wiring harness for Triumph Bobber 1200

Rear BAAK wiring harness for Triumph Bobber 1200 2

Parts

Rear wiring harness for Triumph Bobber 1200

These connectors enable you to connect any item 10W to the original wiring harness of your Bobber 1200 without having to cut or solder any wire.

BAAK Turn indicators brackets kit for Triumph Bobber 1200

BAAK Turn indicators brackets kit for Triumph Bobber 1200 2

Parts

Turn indicators brackets kit for Triumph Bobber 1200

This kit allows you to relocate the indicators of your Bobber 1200 and thus purify its line. The rear indicators incorporate the brake lights.

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

Parts

Front turn indicators bracket for Triumph Bobber 1200

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

Classic leather seat for Moto Guzzi V7 850

Classic leather seat for Moto Guzzi V7 850 2

Parts

Classic leather seat for Moto Guzzi V7 850

This seat is handcrafted by our craftsmen at BAAK's workshop in France, based on a Moto Guzzi seat pan so it remains perfectly suitable for your motorcycle. It's narrower than the original seat and it gives a cafe racer look. Available in Aged brown, Black or Gold leather color. Choose a classic, lightnings or diamonds stitching pattern on the upper...

Heritage leather seat for Moto Guzzi V7 850

Heritage leather seat for Moto Guzzi V7 850 2

Parts

Heritage leather seat for Moto Guzzi V7 850

This seat is handcrafted by our craftsmen at BAAK's workshop in France, based on a Moto Guzzi seat pan so it remains perfectly suitable for your motorcycle. It's narrower than the original seat and it gives a cafe racer look. Available in Aged brown, Black or Gold leather color. Choose a classic, lightnings or diamonds stitching pattern on the upper...

Heritage leather seat for Triumph Scrambler 1200 XC/XE

Heritage leather seat for Triumph Scrambler 1200 XC/XE 2

Parts

Heritage leather seat for Triumph Scrambler 1200 XC/XE

Heritage Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE.

Aventures leather seat for Triumph Scrambler 1200 XE/XC

Aventures leather seat for Triumph Scrambler 1200 XE/XC 2

Parts

Aventures leather seat for Triumph Scrambler 1200 XE/XC

Aventures Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE. Recommended height of the pilot: from 6,2 feet tall

Plate holder for original Triumph Scrambler 1200 XC/XE mudguards

Plate holder for original Triumph Scrambler 1200 XC/XE mudguards 2

Parts

Plate holder for original Triumph Scrambler 1200 XC/XE mudguards

More discreet than the original, this accessory is very easily fitted as a replacement for the original part, delivered with a plug & play harness. In the photos, the light and indicators are Triumph options.

Universal classic-vintage motorcycle rear mudguard

Universal classic-vintage motorcycle rear mudguard 2

Parts

Universal classic-vintage motorcycle rear mudguard

An essential accessory for retro motorcycle enthusiasts. Made from stainless steel, this fender is designed to give your motorcycle an authentic and elegant look. With its classic design and neat finish, it will add a unique touch of style to your café-racer, scrambler, or other motorcycle. This fender is specially designed to fit classic and vintage...

Harness for adaptable indicator Royal Enfield

Harness for adaptable indicator Royal Enfield 2

Parts

Harness for adaptable indicator Royal Enfield

This indicator wiring harness is essential for adapting new indicators to your Royal Enfield. The harness is plug & play with the original connectors of your motorcycle. This 160 mm harness is ideal for installing aftermarket indicators mounted on Japanese cylindrical male connectors ranging from ø3.2 mm to 3.7 mm.Made in France by BAAK.Sold in pairs.

Side plate bracket for Triumph Bobber (2017)

Side plate bracket for Triumph Bobber (2017) 2

Parts

Side plate bracket for Triumph Bobber (2017)

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

US plate bracket for original mudguard Royal Enfield 650 Inter/GT 2

Parts

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

1
…
3
4
5

Back end