Bodywork and protection

Leather & Luggage

Showing 1-24 of 34 item(s)

Outlet

OUTLET - Front fender Classic Medium for Moto Guzzi V7

OUTLET, available in gloss black only. Classic Medium Front Fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. The rolled edges at both ends give it a refined, classic look. It comes pre-drilled to fit the original front fender mounting system. Designed and handcrafted by our artisans in our workshop in France. Dimensions:...

View

OUTLET - Classic Mini front fender for Moto Guzzi V7

-20%
New

Outlet

OUTLET - Classic Mini front fender for Moto Guzzi V7

€62.40 €78.00

OUTLET, available in gloss black only.Classic Mini Front Fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. The rolled edges at both ends give it a refined, classic look. It comes pre-drilled to fit the original front fender mounting system. Designed and handcrafted by our artisans in our workshop in France. Dimensions: 325...

View

Parts

Waterproof seat cover

€25.00

This cover has been designed to protect your Baak leather seat or your original seat from rain and external elements when your motorcycle is parked. Waterproof, resistant to UV, heat and cold, it can be easily stored in its included carry bag and takes up very little space once folded. A subtle tone-on-tone Baak logo decorates the cover. Do not ride...

Triumph

Leather tank strap for Triumph (before-2016)

€126.00

Leather tank strap for Triumph pre-2016 models, Bonneville T100 (2000–2016), Thruxton (2004–2016), Scrambler (2006–2016).This strap is designed for tanks with an offset side filler cap. It dresses your tank and gives it a refined look while protecting it from scratches. Adjustable with a metal tightening buckle, it wraps around the tank. Max length 190...

View

Triumph

Leather tank strap for Triumph (after 2016)

€126.00

Leather tank strap for Triumph Speed Twin 1200, Triumph Street Twin / Street Cup, Triumph Bonneville T120 / T100 (post-2016), Triumph 1200 Bobber, Triumph Street Scrambler.This strap is designed for tanks with an offset side filler cap. It dresses your tank and gives it a refined look while protecting it from scratches. Adjustable with a metal tightening...

View

Triumph

Rear fender Classic bare for Triumph (after 2016)

€189.00

This Classic rear fender is delivered in a bare version: without accessories, to give you complete freedom in customizing your motorcycle. It is made of stainless steel, and its design with a <strong=sculpted end gives it a raw and elegant classic look. It provides good protection against spray from the rear wheel. The integrated mounting holes and...

View

PRE-ORDER - Baak Heritage windscreen for Triumph

On sale!

Triumph

PRE-ORDER - Baak Heritage windscreen for Triumph

€129.00

🔥 Pre-order your BAAK Heritage flyscreen for Triumph post-2016 and benefit from a special 20% pre-order discount off the retail price. ⏳ Limited to 10 pre-orders! 📦 Delivery scheduled for October 2026. Be among the first to fit this Heritage flyscreen to your motorcycle! Its clean, elegant design adds a subtly vintage touch without overdoing it. It...

View

Front and rear fender kit for Triumph Bonneville (2016-...)

-20%
Pack

Triumph

Front and rear Classic fender kit for Triumph (post-2016)

€336.00 €420.00

Time left

Designed to give your Triumph a retro and premium look while improving usability, this Classique fender pack brings a more balanced silhouette, timeless style and meticulous finishing details.Made from stainless steel, the front and rear fenders combine strength, durability and elegance, while effectively protecting against road spray. This complete pack...

View

Triumph

Triangle side covers for Triumph (after 2016)

€75.00

Give your Triumph a stronger character with these aluminum side covers. They replace the original plastic covers and neatly conceal the airbox, while reinforcing your bike’s classic styling. These covers are sold individually (right or left side) and come with all necessary mounting hardware.Compatible with Triumph T100 / T120 Bonneville models...

View

-20%

Triumph

Rear brake caliper protector Triumph

€28.80 €36.00

Time left

Protect your rear brake caliper with this stainless-steel guard specially designed for Triumph motorcycles. The rear caliper on your Triumph sits below the wheel axle and is therefore highly exposed to stone impacts off-road and to curbs in town. This caliper guard is specifically shaped to cover the caliper and reduce the risk of damage from impacts....

View

Brushed stainless steel engine guard V7 III - V7 850 - V9

Brushed stainless steel engine guard V7 III - V7 850 - V9 2

-20%

Parts

Engine guard for Moto Guzzi V7 850 / V9

€79.20 €99.00

Time left

Protect the engine of your Moto Guzzi V7 850 or V9 with this stainless steel engine guard. Available in two finishes: brushed or high-quality satin black epoxy paint. Durable, attractive, and easy to fit with the included hardware, it delivers a badass look while remaining practical. An accessory as useful as it is essential for riding with peace of...

View

Detachable windshield for BMW Nine T Pure and Scrambler

Detachable windshield for BMW Nine T Pure and Scrambler 2

BMW

Removable windshield for BMW R NineT Pure and Scrambler

€816.00

For BMW R NineT Pure or Scrambler, this removable retro-touring windshield is the perfect accessory for daily use or long trips.Easy to remove without tools in just 2 seconds, it leaves only four discreet brackets. Note, it is not compatible with the original headlight; you will need to install our Bates headlight to be ordered separately. Available in...

View

Removable windscreen for Moto Guzzi V7 III / V7 850

Removable windscreen for Moto Guzzi V7 III / V7 850 2

Parts

Removable windscreen for Moto Guzzi V7 III / V7 850 / V9

€816.00

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windshield. 2 seconds to remove it without tools. Supplied with its fixings and headlight brackets, it is available in gloss black or leather (black or brown). Note, the stock headlight is not compatible; you will need a classic headlight ø180mm and a front turn signal...

View

Triumph

Removable windscreen for Triumph Bonneville T100 / T120

€816.00

Equip your Triumph Bonneville T100/T120 with this removable retro-touring windscreen kit. It takes 2 seconds to remove without tools.It includes a removable windscreen and its fittings, as well as headlight brackets matched to the original model. This windscreen is compatible with the original headlight or any other ø180mm headlight, notably our phare...

View

Triumph

Radiator protection grille for Triumph (after 2016)

€84.00

Protect the radiator of your Triumph (2016-...) with this stainless steel grille coated in high-quality satin black epoxy paint. Designed to last, it provides optimal protection without compromising engine cooling. Supplied with stainless steel fittings. This water radiator guard is compatible with the following models: Triumph Bonneville T100...

View

V7 850

Side cover with number plate for Moto Guzzi V7 850

€120.00

Easy to fit, the side cover replaces the original plastic side cover on your motorcycle. It provides a higher level of finish for your Moto Guzzi. These side covers are made of aluminum and are available in satin black epoxy or brushed finish. The left side cover allows you to keep the lock of the exposed seat locking system. Sold individually, supplied...

View

V7 850

Side cover with leather saddlebag for Moto Guzzi V7 850

€273.00

Leather saddlebag for Moto Guzzi V7 850. Add a touch of retro style and practicality to your Moto Guzzi with this leather saddlebag. Discreet and elegant, it carries a few personal items while integrating seamlessly with your bike’s lines. Made from high-quality full-grain leather, the saddlebag is offered in four finishes: Aged Brown, Gold, Chocolate...

View

-20%

V7 850

Side covers for Moto Guzzi V7 850

€60.00 €75.00

Time left

Easy to fit, the cover replaces the original plastic side cover of your motorcycle. It brings a higher level of finish to your Moto Guzzi. These aluminum side covers are available in satin black epoxy or brushed finish. The left side cover allows the seat-lock system keyhole to remain visible. They are notably used in the manufacturing of our leather...

View

Engine guard BAAK for Triumph T100/ T120

Engine guard BAAK for Triumph T100/ T120 2

-20%

Parts

Engine guard TRAIL for Triumph T100/ T120

€116.00 €145.00

Time left

Aluminum engine guard Trail for Triumph T100/T120 (2016-…) with an adventurer look for the best protection.

-20%

Triumph

Classic Mini front fender for Triumph

€86.40 €108.00

Time left

Front Classic Mini Fender for Triumph, made from stainless steel. The mouldings at its ends give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. You can reuse the original fasteners. This Front Classic fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France....

View

High front fender Scrambler for Triumph (2016-...)

-20%

Triumph

Front fender Scrambler for Triumph (after 2016)

€228.00 €285.00

Time left

High front fender Scrambler for Triumph (2016-... liquid-cooled). Handmade, this stainless steel high front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in finishes Glossy black varnish, Satin black, Brushed, Polished,...

View

Moto Guzzi

Leather tank strap for Moto Guzzi V7 III / V7 850 / V9

€135.00

Leather tank strap for Moto Guzzi V7 III, V9 and V7 850. This strap dresses your tank to give it a more refined look. It wraps around the tank and is adjusted using the nylon strap tightening buckle. Please select your motorcycle model correctly to receive a strap that fits. Available in black leather, aged brown, and gold to best match your machine....

View

BAAK injection cover for Triumph T100, Street Twin and Street Scrambler

-20%

Triumph

Injection cover for Triumph 900 (after 2016)

€52.00 €65.00

Time left

Pair of aluminium injection covers for Triumph (2016-...). These covers replace the originals and will give your machine a more refined look. They are compatible with Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). Supplied as a pair, with all necessary stainless steel fasteners. Available in Satin Black and Brushed finish. Not compatible...

View

Parts

Fork gaiters in leather

€240.00

Pair of genuine leather fork gaiters. Handmade in France, they bring a touch of authenticity and distinction to your machine. These 4-, 5-, 6- or 8-pleat gaiters are water-repellent and specially treated to withstand intensive use. Available in several leather finishes. Diameter Ø41mm at the top and Ø63mm at the bottom. Supplied as a pair, with four...

View