Front end & chassis

Showing 145-168 of 170 item(s)

Front mudguard for Triumph Bonneville (pre- 2016)

Front mudguard for Triumph Bonneville (pre- 2016) 2

Bonneville (2000-2016)

Front Long fender for Triumph Bonneville (pre-2016)

Long narrow front fender for Triumph Bonneville (pre-2016 - air-cooled). This fender can be mounted using the original mounting rods and offers a classic look. We use it in particular on our Triumph Bonneville 865 Dandy Bonnie model. Front fender made from stainless steel, designed and manufactured at the BAAK workshop in France. Narrower, shorter, less...

View

Triumph

Front fender Scrambler for Triumph (pre-2016)

€235.00

High front fender Scrambler for Triumph (pre-2016 - air-cooled). Handmade, this high stainless steel front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in Gloss Black, Brushed, Polished, Paint-ready - satin black epoxy...

View

Scrambler front mudguard for BMW NineT 2

BMW

Front fender HIGH for BMW R NineT

€235.00

High front fender Scrambler for BMW R NineT 1200. Handcrafted in stainless steel, this high front fender mounts to the stock lower triple clamp of your BMW R NineT using the supplied mounting plate. It provides solid protection and a pronounced off-road look for your machine. Available in Satin Black, Brushed, Polished finishes.Made in France

View

Moto Guzzi

Front mini fender for Moto Guzzi V7 and V9

€165.00

Front fender Mini for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. This very short front fender will visually lighten the front of your machine. It is pre-drilled to fit your original fender's mounting system. This Medium front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Moto Guzzi

Classic Mini front fender for Moto Guzzi V7 and V9

€108.00

Classic Mini front fender for Moto Guzzi V7 I, V7 II, V7 III, V9 and V7 850, made from stainless steel. Molded edges at its ends give it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

BMW

Front Mini Classic Fender for BMW NineT

€235.00

Classic Mini front fender for BMW R 1200 NineT, made from stainless steel. The moulded ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate matched to the selected model and the necessary stainless fasteners. This Classic front fender is available in satin black, polished, glossy black, brushed...

View

Parts

Classic Mini Universal Front Fender

€102.00

Classic Mini front fender universal, made from stainless steel. The molded edges at its ends give it a very elegant classic look. It is not pre-drilled, so you can fit it to the motorcycle of your choice. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black epoxy) finishes. Designed and...

View

Triumph

Front fender Classic Medium for Triumph

€129.00

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Moto Guzzi

Front fender Classic Medium for Moto Guzzi V7 and V9

€129.00

Classic Medium front fender for Moto Guzzi V7 I, V7 II, V7 III, V9 and V7 850, made from stainless steel. Molding at its ends gives it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

BMW

Front fender Classic Medium for BMW R NineT

€249.00

Classic Medium front fender for BMW R 1200 NineT, made of stainless steel. Mouldings at its ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate adapted to the selected model and the necessary stainless hardware. This Classic front fender is available in satin black, polished, glossy black,...

View

Universal Classic Medium front mudguard 2

Parts

Classic Medium Universal front fender

€114.00

Classic Medium front fender — universal, made from stainless steel. The moulded ends give it a very elegant classic look. It is not pre-drilled so you can fit it to any motorcycle. This Classic front fender is available in satin black, polished, glossy black, brushed and paint-ready (satin black epoxy). Designed and produced by our craftsmen at the...

View

Triumph

Bates headlight mount wide fork yokes Triumph (after 2016)

€25.00

This Bates headlight mounting plate is intended for the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork yoke kit. Bolt hole centre distance: 113mm. Made from 4mm thick aluminium. Satin black epoxy paint.

Triumph

Bates headlight mounting for Triumph Thruxton 1200 / Speed Twin

€25.00

Bates headlight mounting plate for Triumph Thruxton 1200 and Speed Twin. This plate is compatible with the lower triple clamp of the Thruxton 1200 / Speed Twin and allows you to fit a Bates lower-mount headlight to your machine. Bolt hole spacing: 113mm. Made from 4mm thick aluminium. Satin black epoxy paint.

Batte headlight fixing for Moto Guzzi V9

Batte headlight fixing for Moto Guzzi V9 2

V9 (2016-2024)

Bates headlight mount for Moto Guzzi V9

€25.00

Bates headlight mounting bracket for Moto Guzzi V9, required to fit a lower-mount (Bates-style) headlight on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish. This plate is supplied by default with our Bates Front Headlight kits for Moto Guzzi V9. Supplied with the necessary stainless steel fasteners.

Bates headlight mount for Moto Guzzi V7 III and V7 850

V7 III (2017-2022)

Bates headlight mount for Moto Guzzi V7 III and V7 850

€25.00

Bates headlight mounting bracket for Moto Guzzi V7 III and V7 850, essential to fit a lower-mount headlight (Bates type) on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish.

Triumph

Rear fender wiring harness for Triumph

€19.00

Rear fender wiring harness for Triumph. This wiring harness allows you to connect an aftermarket set of turn signals + tail light to your Triumph. It is plug & play with your machine’s original connectors; be sure to select the correct model. This harness is supplied as standard with our rear fenders for Triumph. Available in short and long lengths....

View

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn signal wiring harness for Triumph (after 2016)

€29.00

This turn signal wiring harness is essential for fitting new turn signals to your Triumph (2016-... liquid-cooled). The harness is plug & play on your motorcycle’s original terminals. This 160mm harness is ideal for installing aftermarket turn signals. Supplied in pairs.

Turn indicators wiring harness for BMW NineT

Parts

Turn signal wiring harness for BMW R NineT

€29.00

Turn signal wiring harness for BMW R NineT. These adapters allow you to connect any 10W universal turn signal to the original wiring harness of your BMW R NineT without cutting or soldering any wire. Supplied in pairs. Total length 360mm.

Parts

Headlight spacers

€22.00

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Fork lowering shims for Triumph and Moto Guzzi

Parts

Fork lowering shims for Triumph and Moto Guzzi

€19.00

Short fork spring shims. To fit our short shocks and lower the front of your Triumph or Moto Guzzi proportionally, you will need these short fork spring shims. These shims are 2 cm shorter and replace the original shims.

View

BMW

Turn signal bracket covers for BMW NineT

2366

€30.00

Front turn signal bracket covers for BMW NineT. These black bracket covers are particularly useful to refine the finish when you replace your original front turn signals. Designed in the workshop, manufactured in aluminium, they are painted in satin black epoxy paint. Supplied in pairs with the stainless steel fasteners required for fitting.

Triumph

M-tri Motogadget control unit for Triumph (before 2016)

€199.50

M-TRI multiplexing unit manufactured by Motogadget for Triumph Bonneville, Scrambler, Thruxton EFI from 2011 to present (electronic speedometer). Essential to remove the original speedometer, because without it the motorcycle will not start. This unit restores all original functions and allows fitting any speedometer. It is the unit used in the...

View

Parts

Turn signal bulbs 21W

209-405

€9.00

Transparent turn signal bulbs for mini turn signals, 21 Watt 12 Volt. Supplied in pairs.

Parts

H4 bulb (yellow)

€12.00

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.