Front end & chassis

Showing 97-120 of 170 item(s)

Flat triple-tree fork kit for Royal Enfield 650 Interceptor / Continental GT

Flat triple-tree fork kit for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Flat triple clamp for Royal Enfield 650 Interceptor / Continental GT

Flat top triple clamp kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). It allows you to relocate your ignition switch to clean up the front of your machine, to replace your speedometer and/or to fit a higher handlebar on your Continental GT. This kit includes: Aluminum triple clamp Aluminum handlebar risers (choice of diameter) Remote...

View

Headlight plate for Bates headlight Triumph (2016-...)

-20%

Triumph

Headlight plate for Bates Triumph (after 2016)

€135.20 €169.00

Time left

Bates headlight plate for Triumph (from 2016 - liquid cooled). This aluminum plate neatly conceals the steering stem and cables after fitting a Bates front headlight to your machine. Its 4 leather fastening straps in black, brown, chocolate or gold hold it to your fork tubes. Available in satin black and brushed aluminum finishes, for OEM triple clamps or...

View

High front fender Scrambler for Triumph (2016-...)

-20%

Triumph

Front fender Scrambler for Triumph (after 2016)

€228.00 €285.00

Time left

High front fender Scrambler for Triumph (2016-... liquid-cooled). Handmade, this stainless steel high front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in finishes Glossy black varnish, Satin black, Brushed, Polished,...

View

Lowering spacers for BMW R NineT speedometer

BMW

Lowering spacers for BMW R NineT speedometer

€22.00

Speedometer lowering spacers for BMW R NineT. This kit of 4 spacers allows you to lower your original speedometer by 10mm and gives the cockpit a visually cleaner appearance. Compatible with BMW R NineT Scrambler, Racer, Pure and Urban GS.

Long cable kit for Royal Enfield 650 Interceptor / Continental GT

Long cable kit for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Long wiring harness kit for Royal Enfield 650 Interceptor / Continental GT

€33.16

Long cable kit for Royal Enfield 650 Interceptor / Continental GT. This kit includes an extended brake hose, a clutch cable and a pair of throttle cables matched to your Royal Enfield. It allows fitting a wider handlebar on your machine. Each item in the kit can be purchased separately. The variant choice (2024 - now) corresponds to the new aluminium...

View

motogadget Tiny speedometer for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

motogadget Tiny speedometer for Royal Enfield 650 Interceptor / Continental GT

€448.00

Tiny speedometer for Royal Enfield 650 Interceptor / Continental GT (2018-...). This plug & play speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functions of your original instrument. The speedometer is delivered pre-wired, with its wiring harness, and its satin black aluminium mounting plate. Your...

View

Mini speedometer for Royal Enfield Classic / Bullet 500 (Euro IV) | BAAK

Mini speedometer for Royal Enfield Classic / Bullet 500 (Euro IV) | BAAK 2

Bullet / Classic (2008- ..)

motogadget Tiny speedo for Royal Enfield Classic / Bullet 500 (Euro III and IV)

€448.00

motogadget Tiny speedo for Royal Enfield Classic and Bullet 500 Euro III and IV (2008-...). This plug & play speedo solution is ideal to simplify the cockpit of your Royal Enfield while keeping the functions of your original instrument. The speedo is delivered pre-wired, with its wiring harness and its satin black aluminium mounting plate. Your bike’s...

View

Front fender Classic Mini for Triumph Bobber

Front fender Classic Mini for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Classic Mini front fender for Triumph Bobber

€168.00 €210.00

Time left

Classic Mini front fender for Triumph Bonneville Bobber (2017-...), made from stainless steel. The rolled edges at its ends give it a very elegant classic look. It is pre-drilled and supplied with its mounting brackets to fit your Triumph Bobber perfectly. This front fender is not compatible with Bobber Black, Bobber TFC and Bobber EURO V models....

Front fender Classic Medium for Triumph Bobber

Front fender Classic Medium for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Front Classic Medium fender for Triumph Bobber

€168.00 €210.00

Time left

Classic Medium front fender for Triumph Bonneville Bobber (2017-...), made of stainless steel. The beaded edges at its ends give it a very elegant classic look. It is pre-drilled and supplied with its specific mounting brackets to fit your Triumph Bobber. This front fender is not compatible with Bobber Black, Bobber TFC and Bobber EURO V models....

View

Adjustable 2Win shocks for Royal Enfield Bullet / Classic 500

Adjustable 2Win shocks for Royal Enfield Bullet / Classic 500 2

Bullet / Classic (2008- ..)

2Win shock absorbers for Royal Enfield Bullet / Classic

€517.20

2Win aluminum shock absorbers for Royal Enfield Classic / Bullet 500 (including Euro IV). These shock absorbers are adjustable in spring preload and hydraulic damping. Each click of the adjuster modifies the compression and rebound damping simultaneously and ensures a high-quality ride. Very easy to use, even while riding. These shock absorbers,...

Front Fender Riser Kit for Royal Enfield Himalayan

Himalayan 400

Front Fender Riser Kit for Royal Enfield Himalayan

€33.00

Front fender lift kit for Royal Enfield Himalayan. This kit of 4 screws and 4 aluminum spacers raises your front fender by 10 mm if you plan to fit a taller-profile tire than the original tire on your Royal Enfield Himalayan. Compatible with your original fender. These spacers are to be fitted between your original fender bracket and your fork.Made in France

Front turn signal brackets for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Front turn signal brackets for Royal Enfield 650 Interceptor / Continental GT

€30.00

Front turn signal brackets for Royal Enfield 650 Interceptor / Continental GT. Simple and very discreet, these brackets painted in satin black epoxy allow mounting any universal turn signal with a mounting diameter of øM8 or øM10 on your Royal Enfield. They attach under your lower triple tree. Supplied as a pair, sold without turn signals.

View

Front Fender Raiser Kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Front Fender Raiser Kit for Royal Enfield 650 Interceptor / Continental GT

€33.00

Front fender lift kit for Royal Enfield 650 Interceptor / Continental GT. This kit of 4 screws and 4 aluminum spacers raises your front fender by 10mm if you plan to fit a taller-profile tire than the original tire on your Royal Enfield 650 Interceptor / Continental GT. Compatible with your original fender. These spacers are to be installed between your...

Classic Mini Front Fender Royal Enfield 650 Interceptor / Continental GT

Classic Mini Front Fender Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic Mini Front Fender Royal Enfield 650 Interceptor / Continental GT

€86.40 €108.00

Time left

Classic Mini front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...), made from stainless steel. Rolled edges at its ends give it a very elegant classic look. It is pre-drilled to fit your motorcycle. Available without or with a lift kit (+10mm) if you wish to fit a front tire with a taller profile than the original. This Classic front...

View

Front Fender Classic Medium Royal Enfield 650 Interceptor / Continental GT

Front Fender Classic Medium Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Front Fender Classic Medium Royal Enfield 650 Interceptor / Continental GT

€96.00 €120.00

Time left

Classic Medium front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...), made from stainless steel. The mouldings at its ends give it a very elegant classic look. It is pre-drilled to fit your Royal Enfield. Available without or with a +10mm lift kit if you want to mount a front tyre with a taller profile than the original. This Classic...

View

Bates headlight mount Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Bates headlight mount Royal Enfield 650 Interceptor / Continental GT

€25.00

Bates headlight mounting bracket for Royal Enfield 650 Interceptor / Continental GT, essential for fitting a lower-mount (Bates-style) headlight on your motorcycle. Made from 3mm thick aluminium, satin black epoxy paint. Available only in black finish. Delivered with the necessary stainless steel fasteners.

High front fender Scrambler for Moto Guzzi V7I and V7II

High front fender Scrambler for Moto Guzzi V7I and V7II 2

-20%

V7 I & V7 II (2007-2017)

Front fender Scrambler for Moto Guzzi V7I / V7II

€228.00 €285.00

Time left

High front fender Scrambler for Moto Guzzi V7I and V7II. Handcrafted in stainless steel, this high front fender mounts to your V7’s original lower triple clamp using the supplied satin black mounting plate. It provides solid protection and a bold off-road look for your machine. Available in Satin Black, Gloss Black, Brushed, Polished. Dimensions:...

View

Regulator bracket for Triumph (pre-2016)

-20%

Triumph

Regulator bracket for Triumph (pre-2016)

€24.00 €30.00

Time left

Regulator mounting plate for Triumph (pre-2016 - air-cooled). This bracket allows the voltage regulator to be relocated to the horn position. The horn can then be mounted below, on the same plate. Compatible with our Front turn signal bracket for Triumph. Laser-cut aluminium. Installation requires relocating your wiring harness under the tank. All...

Triumph

Regulator bracket for Triumph (after 2016)

€45.00

Regulator bracket plate for Triumph (2016-...). This bracket allows you to relocate your regulator behind the radiator rather than on the upper triple clamp to visually streamline your machine. Made from stainless steel, laser-cut. Its installation requires relocating your wiring harness under the tank. Supplied without regulator, with the necessary...

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

-20%

Triumph

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

€39.20 €49.00

Time left

Bracket allowing you to mount your regulator, front turn signals and horn on a single bracket, for Triumph (pre-2016 - air-cooled). This accessory visually lightens the lines of your motorcycle by relocating these parts beneath the steering head. This bracket measures 21.8 cm wide and 12 cm high. It mounts to the original horn anchor point. This...

Parts

Bates headlight bracket

€30.00

Bates headlight mounting bracket, essential for fitting a lower-mounted front headlight. Made from 4mm thick aluminium. Supplied with stainless steel fasteners. Ø6mm mounting hole centers from 68mm to 95mm Bates headlight mounting Ø10mm

Contact switch relocation kit for Triumph (before 2016)

-20%

Triumph

Contact switch relocation kit for Triumph (before 2016)

€39.20 €49.00

Time left

Switch bracket for Triumph (pre-2016). This bracket allows the ignition switch to be moved between the fuel tank and the left carburetor. It mounts on the right on fuel-injected (EFI) models. Its installation requires relocating under the tank the wiring harness that is normally in the headlight, without having to lengthen any electrical cables....

Ignition switch relocator for Triumph (after 2016)

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

Side speedometer holder for Triumph Street Twin / Street Scrambler

Side speedometer holder for Triumph Street Twin / Street Scrambler 2

-20%

Parts

Offset speedometer bracket for Triumph Street Twin / Street Scrambler

€71.20 €89.00

Time left

Offset speedometer bracket for Triumph Street Twin / Speed Twin 900 / Street Scrambler. This accessory allows you to offset your speedometer to the right or left of the ignition switch to visually clear the front of your machine.Less prominent at the front, your original speedometer becomes more discreet, a simple solution to give your Street Twin an...