Parts » Triumph » Bonneville (Before 2016)

Front turn signals bracket for Triumph

This turn signal bracket / support is simple, effective and very discreet. Stainless steel laser cut and epoxy painted matte black.

Fits with the bracket regulator Triumph, or can be screwed on the superior fixing of th the oil radiator.

Triumph Bonneville, Thruxton, Scrambler, Street Twin and T120. Sold without lights.

19 €

Rear turn signal support for Triumph

Simple, effective and very discreet.  Stainless steel bracket laser cut and painted in matt black epoxy.

Fits with any fender. Delivered without turn signals.

For Triumph Bonneville, Scrambler and Thruxton.

22 €

Switch Bracket for Triumph

Switch support for Triumph. This simple switch support enables you to move the ignition switch between the fuel tank and the left carburetor. Fits right side on the injection models.

It requires to move the harness that is in your headlight, under the gas tank, without having to lengthen any electric cable. 

Aluminum, laser cut, painted in satin black epoxy painting.

49 €

Bracket regulator Triumph

This plate allows you to move the voltage regulator, instead of the horn. The horn can be attached below, on the same plate.

This board can agree with Front barcket flashing
 
Aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank.

30 €

Rear turn signals brackets for Triumph

Rear turn signals bracket for Triumph Bonneville, Scrambler, Thruxton, Street Twin, T100 (from 2016) and T120.

Enables you to mount your turn signals on the shock absorber axis for a more discreet look. Compatible with the original passenger grab handle.
Flashing Axis ø10mm, shock absorber axis Ø14mm or Ø16mm, length 50mm.

Comes in pairs.

19 €

Mini round aluminum flashing.

Aluminium mini blinkers, 4cm diameter, 21W bulbs, made in aluminium.

Very nice finish, much more discreet than most of the original turn signals. We use it on the major part of our custom projects.

Sold in pairs. UE approved.

50 €

Mini Turn Signals

Mini blinkers. These small indicators are beautifully made and measures only 6cm long.
They are bulbs, classic and beautiful.

Sold in pairs, it's EU approved.

16,50 €

Wiring rear fender Triumph

Essential to connect a set of turn signals and aftermarket taillights. Plug and play on the pod behind the motorcycle.

This bundle is compatible with all Triumph Scrambler / Bonneville / Thruxton since 1999.

Comes standard with all the fender BAAK. Accessory designed and manufactured in France BAAK workshop.

Supplied with instructions.

19 €

10mm headlight strut

Motorcycle headlight struts, made in aluminium, to perfectlly adjust the fixation of your headlight. The hole diameter is 8mm, the exterior diameter is 29mm.

For Moto Guzzi V7 headlight : 10mm

For Triumph headlight : 5mm

11 €

M-TRI Motogadget pour Triumph

Multiplexing Case TRI-M manufactured by Motogadget for Triumph Bonneville Scrambler Thruxton EFI since 2011 to today.

Indispensable to remove the original speedometer, because without it the motorcycle will not start.

This box allows to resume all functionalized source and assemble all speedometer.

available:

  • Wired
  • Unwired.

349 €

Fork gaiters in silicone

High quality silicone fork gaiters. For the following diameters fork tubes :

  • Ø41mm, Bonneville, Scrambler and Thruxton T100, Street Twin and T120. 
  • Ø40mm, Moto Guzzi V7 I et II, et V9.

Average length of 8cm (Beware of Chinese plastic ones which will resist a year !)

Comes in pairs.

49 €

Bates headlight for Triumph

Bates type headlight for Triumph. This lower fixation lighthouse is 15cm diameter. Its casing and trim ring enables you to visually lighten your fork tubes and improve the look of your motorcycle.

Suits the Triumph Bonneville / Thruxton / Scrambler (before 2016) and the Triumph Street Twin / T100 / T120 (since 2016). It comes with a fixation bracket and a plug & play wiring harness.

114,01 €

Wide fork Té for Triumph

Wide fork té kit for Triumph Bonneville Scrambler Thruxton. 10mm wider than the original ones.

Required for mounting a 16" wheel at the front, and a 5.00" tire.

Geometry modified improves handling and compensate the big front tire !

630 €

Tiny mount bracket for Triumph

Mount bracket for Motogadget Tiny speedometer.

Available for Triumph Bonneville - Scrambler - Thruxton or MotoGuzzi V7.

Comes with all the necessary screwing.

49 €

Handlebar grips

Thruster left and right handlebar grips produced by Biltwell motorcycles. Allows a better handtaking of your handlebar, and an incredible look.

Available in black and brown. Comes in pairs.

Handlebar diameter 1 "or 22mm.

18 €

Handlebar grips

Left and right handlebar grips Renegade, produced by Biltwell for character motorcycle. Allows a better handtaking of your handlebar, and an incredible look.

Handlebar diameter 1 "or 22mm. Comes in pairs.

18 €

Oil temperature gauge Triumph

Oil temperature screw gauge, comes in place of the original oil filler cap. Allows you to monitor the oil temperature of your engine.

Fits with Triumph Bonneville, Thruxton, Scrambler, T120, T100 (from 2016) and Street Twin.

32 €

Front fender fixation bracket for Triumph

These stainless steel fixation bracket enable you to assemble the front fender of your choice on your Triumph fork (Bonneville, Scrambler, Thruxton). 
They allow to adjust the height of the mudguard, and position in the location of the original legs. Product delivered by pairs.

25 €

Leather care cream

This cream is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc.

Capacity : 150 ml.

18 €

Thermal tape

Here are 15 meters from thermal wrap, 5 cm wide, to bundle up your exhaust system and give you a look of BAD BOY.

For black color, we advise you to paint with a special high temperature painting, so the color can resist over the mounths.

It's a great quality part, beware of low-cost ones!

59 €

Plastic mini turn signals

Mini turn signals / blinkers made in plastic. With its M10 fixation, it comes in place of most of the original blinkers. 10w bulb included.

Much more discreet than the original blinkers, it offers a better finish to your motorcycle.

Sold in pairs. Blinkers dimension : 45x55mm. 

19 €

Scroll To Top