Best sellers

Showing 109-144 of 301 item(s)

Triumph wheel arch/plate holder, rear position and turn signal holder

-20%

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

$201.60 $252.00

Fender Eliminator Kit for Triumph Thruxton 1200 and Speed Twin Euro 4 / Euro 5 (2016 – …). This satin black aluminum undertray visually lightens the rear of your Triumph and gives it a more radical look. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic position), turn...

View

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

$92.16 $115.20

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

License plate holder triangle for Triumph Thruxton / Speed Twin 1200 2

-20%

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

$52.80 $66.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

View

Rear turn indicators brackets for Triumph

-20%

Triumph

Rear turn indicators brackets for Triumph

$28.80 $36.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Parts

Leather covered handlebar grips

$174.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

View

Parts

Heritage headlight

$118.80

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

View

Kickstand Extension for Triumph Scrambler (pre-2016)

Kickstand Extension for Triumph Scrambler (pre-2016) 2

-20%
New

Home

Kickstand Extension for Triumph Scrambler (pre-2016)

$63.36 $79.20

PRE-ORDER PRODUCT (available in October) Say goodbye to excessive lean on your Triumph Scrambler (pre-2016). This kickstand extension increases the length of your original stand by 20 mm. It reduces the bike’s excessive tilt when parked and ensures better stability on all types of terrain. Ideal if you've installed longer shocks or larger tires than...

Short license plate holder for Triumph Scrambler 1200 XC/XE/X

Parts

Short license plate holder for Triumph Scrambler 1200 XC/XE/X

$180.00

More discreet than the stock setup, this aluminum accessory replaces the unsightly plastic license plate holder of the Scrambler 1200, while retaining the original mudguard. The license plate light comes pre-wired with a plug & play connector. In the photos, the taillight and indicators are Triumph optional accessories.

-20%
New

Home

Radiator sides - Fantic Caballero

$72.00 $90.00

radiator flanks for Fantic Caballero Protect your radiator with these protection flanks specially designed for the Fantic Caballero 500. manufactured in brushed aluminum. sold in pairs. They integrate harmoniously into the Caballero design and can be associated with other accessories for an even more assertive look. Compatibility: Caballero...

High Front Fender Kit – Fantic Caballero

High Front Fender Kit – Fantic Caballero 2

-20%
New

Home

High Front Fender Kit – Fantic Caballero

$239.04 $298.80

High front fender for Fantic Caballero. This stainless steel scrambler-style front fender mounts in a high position on the lower triple tree of your bike using our specific mounting bracket. It offers excellent protection and ensures a complete off-road look. Available in 3 different finishes (Brushed, Gloss Black, Satin Black). This kit reduces the...

View

Royal Enfield

Rear Wiring Harness Only for Royal Enfield 650

$22.80

This wiring harness allows you to connect an aftermarket turn signal and rear light assembly to your Royal Enfield 650. It is plug & play with the original connectors of your bike. Available in short and long sizes. Designed and manufactured by our team at the BAAK workshop.

-20%

Home

Universal Reflector for License Plate

$9.50 $11.88

Black finish, mounts on the license plate bracket or directly on the license plate.

Classic Mini front mudguard for Moto Guzzi

-20%

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

$103.68 $129.60

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9 2

Moto Guzzi

Monza gas cap for Moto Guzzi V7III / V9

$180.00

Monza gas cap for Moto Guzzi V7 III and V9. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter. It doesn't have any lock system and simply opens by pushing on the opening button. It is only...

Home

Air filter maintenance kit (France version)

$15.84

Washable Air Filter Maintenance Kit Take care of your air filter and extend its performance with this complete maintenance kit. It contains everything you need to clean and re-oil your filter at each service to ensure optimal airflow and consistently effective filtration. Not suitable for original-style air filters, which must be replaced.

Trail engine guard - Triumph 1200 XE-XC 2

-20%
New

Home

Trail engine guard - Triumph 1200 XE-XC

$153.60 $192.00

Aluminum Trail Skid Plate for Triumph Scrambler 1200 XE-XC In addition to giving your Scrambler an adventurous look, this skid plate provides effective protection for the lower engine in all conditions. Made of 4 mm thick aluminum, it provides a real shield against splashes, stones, and impacts associated with aggressive off-road riding. Easy to install,...

View

-20%
New

Parts

"Camembert" air filters

$94.08 $117.60

"Camembert" style round air filters. This pair of air filters offers a retro look and a great filtration quality to your motorcycle. Connection sleeve : Ø53,5mm Filter : Ø139mm and 41mm thick. Comes in pair with two stainless steel fixation collars. These filters are only suitable for Triumph Bonneville T120.

Home

FICTECH microfiber

$7.08

Discover the FICTECH microfiber for cleaning and caring for your motorcycle. Designed to meet the needs of vehicle enthusiasts, this microfiber offers professional-grade quality for a flawless clean without scratches.

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look

-20%

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

$190.08 $237.60

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

View

Universal

Universal handlebars controls kit

$237.60

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

$90.00

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

View

Airbox removal kit for Triumph T120 (2016)

Airbox removal kit for Triumph T120 (2016) 2

-20%

Bonneville T120 (2016 -...)

Airbox removal kit for Triumph T120 (2016)

$268.80 $336.00

Airbox removal kit for Triumph Bonneville T120 (2016-...). This kit enables you to visually lighten the line of your motorcycle and make it breathe better. This kit includes: The aluminium battery box (Satin black only) A pair of "camembert" air filters A pair of aluminium side covers (Satin black or Brushed) with or without saddlebag(s) All the...

View

Aluminium intake cover for Triumph 900 (2016-...)

-20%

Triumph

Intake covers for Triumph 900 (2016)

$62.40 $78.00

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

View

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

-20%

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

$24.00 $30.00

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

License plate holder for original Moto Guzzi V9 fender

License plate holder for original Moto Guzzi V9 fender 2

-20%

V9 (2016 -...)

License plate holder for original Moto Guzzi V9 fender

$161.28 $201.60

License plate holder for original rear fender of Moto Guzzi V9. This bracket, painted in satin black epoxy, mounts directly in place of the original unit. It consists of a license plate holder, a round LED tail light (EU approved) with license plate illumination, a pair of indicator brackets of your choice, and a plug & play wiring harness.

View

Leather seat for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Leather seat for Royal Enfield 650 Interceptor / Continental GT

$648.00

Heritage leather seat for Royal Enfield 650 Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on a Royal Enfield seat more comfortable than the original one and so it remains compatible with your motorcycle. It has the same shape as your original seat, but covered with leather which will give...

View

Parts

Universal Medium side leather saddlebag

$208.80

Universal Medium leather side saddlebag for motorcycle. Handcrafted at our workshop, it enables you to bring some stuff while you ride, and gives a great vintage look to your motorcycle. It's available in aged brown, gold, black or ruby leather color. The bottom of the saddle is pre-drilled (120mm enter-axis) so you can assemble it easily on your bike....

View

Triumph

Classic Headlight / Integrated Speedometer for Triumph (pre-2016)

$1,008.00

Classic headlight with integrated speedometer for Triumph (before 2016 – air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal headlight with M8 side mounts, is the ideal way to visually lighten the front of your bike while retaining advanced speedometer functionalities. This speedometer is offered in a plug & play version,...

View

Triumph

Wide fork triple trees kit for Triumph T100-T120 (2016)

$1,440.00

Wide fork triple yokes kit for Triumph Bonneville T100 / T120 (2016-... - liquid-cooled), it enables you mount a wide front tire (3.50). The kit includes the upper and lower triple trees 20mm wider, the lower bearing, the brake discs struts, the handlebar clamps and the wheel axle. Enable to lower the front end by 25mm. This kit is used on our Triumph...

View

Triumph

Short leather seat kit for Triumph (pre- 2016)

$1,548.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

View

Parts

Tracker bar handlebars

$190.80

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

View

-20%

Triumph

Mini front mudguard for Triumph

$158.40 $198.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Green Filter Replacement Air Filter for Royal Enfield 650 Interceptor / Continental GT

Home

Green Filter Replacement Air Filter for Royal Enfield 650 Interceptor / Continental GT

$83.23

Optimize your motorcycle's performance with this Green Filter sports air filter, designed with double-layer oiled cotton for superior airflow and optimal filtration. Simple maintenance with the Green Filter kit (optional). Easy installation: directly replaces the original filter.More power, more torque, less fuel consumption.Washable and reusable for...

Classic rear mudguard kit - Fantic Caballero

Classic rear mudguard kit - Fantic Caballero 2

-20%
New

Home

Classic rear mudguard kit - Fantic Caballero

$334.08 $417.60

classic rear mudguard for Fantic Caballero in stainless steel. Its molded end gives it a classic and elegant look. It provides good protection against projections of the rear wheel. equipped with a rear light with LEDs with LEDs (CE approved), plate lighting (CE approved) Plug & amp; Play, a plate holder, rear indicators supports to choose from,...

View

Black Injection covers for Triumph Bonneville T120

Black Injection covers for Triumph Bonneville T120 2

-20%

Parts

Black Injection covers for Triumph Bonneville T120

$62.40 $78.00

Black Injection Covers for Triumph Bonneville T120. These injection covers are original Triumph T120 covers but have been treated with satin black epoxy paint. Sold as a pair.

Short seat kit rear loop for Royal Enfield 650

Interceptor / Continental GT 650

Short seat kit rear loop for Royal Enfield 650

$237.60

This rear loop is designed to shorten the back of your motorcycle, offering a sleek, minimalist style and a more compact overall silhouette. Made with a high-quality glossy black epoxy coating, it perfectly matches the frame’s color for discreet and seamless integration.