Parts » Moto Guzzi » v9

Leather seat for Moto Guzzi V9

Leather seat for your Moto Guzzi V9. This seat has the same shape and comfort as your original one, but it is handcrafted with black, brown, gold or ruby genuine leather. This seat is entirely manufactured at our workshop in France with high quality leather. 

This saddle comes with a free BAAK special cream to maintain the leather in good shape.

550 €

Bates headlight for Moto Guzzi

Bates type headlight for Moto Guzzi V7 and V9. This lower fixation lighthouse is 15cm diameter. Its casing and trim ring enables you to visually lighten your fork tubes and improve the look of your motorcycle.

Suits the Moto Guzzi V7 I, V7 II, V7 III, and Moto Guzzi V9. It comes with a fixation bracket and a plug & play wiring harness.

109 €

Leather fork gaiters + stainless steel collar

Pair of genuine leather fork gaiters. These 4, 6 or 8 folds fork gaiters are handmade in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. 

Diameter Ø41mm top and Ø63mm bottom, fits for Triumph Bonneville, Thruxton, Scrambler, Street Twin, T120 and Thruxton (except R version) and Moto Guzzi V7.

190 €

Leather handlebar grips

Leather handlebar grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. 

Available in aged brown, gold, black and ruby leather. Four thread colours available so it perfectly suits your bike.

Available for 25,4mm (1 inch) and 22mm handlebars.

145 €

BAAK N°1 handlebars

Wide stailness steel handlebars. It's flatter, wider and has more pullback / sweep to the driver than other handlebars. It will offer a very distinguised look to your motorcycle, and improve its handling qualities. 

The stainless steel tubes we selected, very thin and resistant, make it a good quality handlebar.

95 €

BAAK N°1 Handlebar crossbar

Wide stainless steel handlebar with crossbar. It offers a very comfortable driving position and great handling. It's flatter, wider and has more pullback to the driver than other handlebars. Its central crossbar offers a nice scrambler look.  

The stainless steel tubes we selected, very thin and resistant, make it a good quality handlebar.

125 €

Scrambler chromed handlebars

Scrambler chromed handlebars, 22mm diameter. It's 82cm wide and 13cm high. Made in steel, it offers a better finish level than most of the original handlebars. It's high and has a good return to the rider, which gives a better driving position and comfort. 

With its central bar, it will offer a real scrambler look to your motorcycle.

65 €

Flat track handlebar

Flat Track handlebar manufactured in steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. 

Available in 1 inch' (25,4mm) and 22mm diameter. It's 81cm wide and 13cm high.

69 €

Fatbar handlebar

Fatbar handlebar and risers in aluminium. This bar is perfect to give a more impressive look to your bike. This wide handlebar allows a more comfortable riding position than the original ones. 

The centric part is 28mm diameter, which requires to adapt compatible handlebar clamps in Fatbar handlebar as the ones we offer in option with this part.

250 €

Fatbar handlebar with leather protection

Fatbar handlebar with crossbar and leather / foam protection. This handlebar has a 22mm diameter for the grips and 28,6mm diameter for the clamps. Its design offers a confortable riding position. It's only available in satin black powder coat painting. 

Can be provided with optional BAAK aluminium handlebar clamps.

160 €

Aluminium handlebar clamps

Machined aluminium handlebar clamps for motorcycle. These risers are available in Fatbar diameter (28,6mm) or 1 inch diameter (25,4mm), it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing.

Designed and manufactured at BAAK's workshop.

135 €

Leather saddlebag for Moto Guzzi V9 & V7 III

Side leather saddlebag for Moto Guzzi V9 and V7 III. This saddlebag is handcrafted at the workshop in a great quality leather. It's available in aged brown, gold, black and ruby colour.

The kit includes two aluminium side covers and the bag fixed on the right side, left side, or one bag for each side. 

295 €

Aluminium side covers for Moto Guzzi V7

Aluminium side panels for Moto Guzzi V7 III and V9. It comes to replace the stock plastic side covers of your bike. These parts will bring a better finish level to your Moto Guzzi, using noble material.

Comes in pairs, with the necessary stainless steel screwing kit. Don't suit the Moto Guzzi V7 I and V7 II.

170 €

Moto Guzzi V9 Bates headlight bracket

Bates headlight fixation bracket for Moto Guzzi V9, required to mounta lower fixation headlight on your motorcycle.


Made in aluminium, 3mm thick, black powder coat painting. Available in black finish only. Comes with all the necessary stainless steel screwing.

25 €

Moto Guzzi V9 rearset

Machined rearset for Moto Guzzi V9. This machined stainles steel (5mm thick) kit enables you to move 70mm back the controls of your motorcycle and enjoy a more comfortable and sporty riding position. 

Manufactured at our workshop, satin black epoxy painting finish, comes in pairs with all the necessary stainless steel screwing. Rear brake hose included.

155 €

License plate support for Moto Guzzi V9 original fender

Moto Guzzi V9 license plate support for original rear fender. This satin black epoxy painted part comes in place of your original support.

This kit is composed of a license plate support, a round LED taillight with plate lightning, a pair of turn signals brackets on choice, a plug & play wiring harness and two optionnal pairs of blinkers. 

150 €

Side license plate support for Moto Guzzi

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. 

This support is satin black epoxy painted. The blinkers and blinkers bracket are optional.

This part suits the Moto Guzzi V7 I, V7 II and V7 III, and Moto Guzzi V9.

95 €

Monza gas cap

Monza gas tank cap. The legendary Monza cap will perfectly suit your gas tank thanks to our exclusive adapter. 

The full kit includes the gas cap, the seal, the necessary screwing and the adapter. This part is manufactured in aluminium, it's polished finish.

Beware of poor quality copies.

129 €

Under handlebar mirror

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility with its wide angle glass.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually. Fit both left and right sides, available in satin black only.

34 €

Mini round mirror

Mini round mirror, Ø8cm with M8 threading, for upper position. The mirror stem is 13cm long, its shape was specificly designed to guaranty a good rear visibility and a discreet look.

Suits for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

29 €

Round mirror Ø10cm

We have selected this LSL mirror, because they are beautiful and useful. They are fully anodized aluminum, the Ø10cm diameter mirror is blue, neither too large nor too small. They offer a good field of vision.
This mirror come with M10 fixation and is sold individually.

89 €

Handlebar mirror adapter

Handlebar adapters, required for mounting some mirrors. We offer two different solutions : 

  • 22mm handlebar adapter lower position, to mount our mini mirrors under your handlebar. 
  • Through rod fixation adapter, to mount any type of mirror in upper position on a handlebar with a through rod type fixation, in upper or lower position.

15 €

Shocks Big-Body for Bonneville T120

Wide Big Body shock absorbers for Moto Guzzi V9. We developed this part in order to give a stronger look and better shock absorption skills to the Moto guzzi V9.

It's the most wide shock absorbers you can find for this motorcycle. 

Sold in pair. Longevity 100 000Km. Length 340mm. Available in Classic or Full black finish.

495 €

Mini round aluminum flashing.

Aluminium mini blinkers, 4cm diameter, 21W bulbs, made in aluminium.

Very nice finish, much more discreet than most of the original turn signals. We use it on the major part of our custom projects.

Sold in pairs. UE approved.

52 €

Mini Turn Signals

Mini blinkers. These small indicators are beautifully made and measures only 6cm long. They are bulbs indicators, classic and beautiful.

It's 21W bulbs blinkers.

Sold in pairs, it's an EU approved part.

19 €

Front turn signals bracket for Moto Guzzi

Turn signals support for Moto Guzzi, simple, effective and very discreet. Stainless steel laser cut and epoxy painted in satin black.

It mounts on the upper regulator screw of your motorcycle. Suits Moto Guzzi V7 I, V7 II, V7 III and V9. Sold without blinkers.

19 €

Rear turn signals bracket for Moto Guzzi V7

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the shock absorber axis for a more discreet look. 

Comes in pairs. This part suits Moto Guzzi V7 I, V7 II, V7 III and V9.

19 €

Scroll To Top