Parts » Triumph » Street Twin / Street Cup

"Avant" pack for Triumph Street Twin

Full kit to visually lighten the front of your Triumph and give it a more aggressive look. 

This pack includes : 

  • Metal flat headlight
  • 60mm headlight brackets
  • Side speedometer support
  • Under the steering column turn signals support + long wiring harness + pair of front turn signals
  • Regulator support 

Suit the Triumph Street Twin, Street Cup and Street Scrambler.

379 €

Short seat kit for Triumph (since 2016)

Short leather seat kit for Triumph Bonneville T100 / T120 / Street Twin and Street Scrambler (new generation). Enables to get a more compact look and the elegance of a leather seat while keeping two seatings.

Comes with:

  • Machined aluminium short subframe system
  • Genuine leather seat
  • Stainless steel mudguard with plate holder and bates taillight
  • Blinkers support

1 150 €

Leather saddlebag for Triumph T120, T100, Street Twin

Side leather saddlebag for Triumph Bonneville T120, T100 (from 2016), Street Twin / Cup and Street Scrambler. This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some objetcs and gives a retro distinguished look to your bike.

It comes mounting on a Brushed or Satin black aluminium cover that comes in place of your original side cover. 

220 €

Black leather gas tank strap

Universal leather gas tank strap / belt, fits with any gas tank with cap on the side. It gives a distinguished look to your motorcycle tank. 

It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. It particularly fits for Triumph Bonneville, Scrambler, Thruxton, Street Twin and T120. Maximum lenght 190cm, minimum 107cm.

95 €

Leather seat for Triumph Street Twin / Street Scrambler

Leather seat for Triumph Street Twin / Street Scrambler. This leather saddle is handcrafted at our workshop. It's 2,5cm narrower than the original one, which considerably improves the look of the Triumph. We use high quality french origin leather to make this seat. 

The seat foam is 6cm thick which gives a good comfort and a flat look. It's available in classic ribbed or diamonds rib-shaped. 

550 €

Leather seat for Triumph Street Twin / Street Scrambler

This leather seat for Triumph Street Twin / Street Scrambler is handcrafted by ourself at our workshop. It's 2,5cm narrower than the original one, which considerably improves the look of your Triumph. We use an high quality french leather to handcraft this seat. 

The 6cm foam thickness gives a good comfort and a flat saddle look.

The seat lock system is preserved.

550 €

Mini rear fender for Triumph Street Twin, T100 & T120

Mini rear fender / mudguard made in stainless steel for Triumph Street Twin, Bonneville T120 and T100 (from 2016). This product includes a round LED taillight, a license plate lightning and a lincense plate support. 

You can choose to place your turn signals on the license plate support or on the shock absorbers axis. 2 models of optional turn signals available.

335 €

Short rear steel fender - Brushed finish

Short rear fender for Triumph Bonneville T120, T100 (from 2016), Street Twin and Street Scrambler, equipped with a taillight with license plate lightning, a license plate support and the blinkers support of your choice.

Shorter than the original one, this stainless steel part is really effective against the sprays and enables you to keep the original passenger bar / grab bar of the Triumph T120. 

335 €

Mini front fender for Triumph

Mini stainless steel front mudguard for Triumph, perfect to modify the look of your motorcycle while keeping a good protection.

It's pre-drilled for the bike of your choice : Triumph Bonneville, Scrambler, Thruxton, and the new Street Twin, Street Scrambler, T100 and T120 from 2016. 

115 €

Medium front mudguard for Triumph

Stainless steel medium front mudguard for Triumph, perfect to visually lighten the look of your motorcycle while keeping a good protection.

This front fender is pre-drilled for the bike of your choice : Triumph Bonneville, Scrambler, Thruxton, and the new Street Twin, Street Scrambler, Thruxton, T100 and T120 2016. 

135 €

Bates headlight for Triumph

Bates headlight for Triumph. This lower fixation lighthouse is 15cm diameter. Its casing and trim ring enables you to visually lighten your fork tubes and improve the look of your motorcycle.

Suits the Triumph Bonneville / Thruxton / Scrambler (before 2016) and the Triumph Street Twin / T100 / T120 / Thruxton 1200 (since 2016). It comes with a fixation bracket and a plug & play wiring harness.

114,01 €

Triumph Street Twin headlight - Brushed finish

Triumph Street Twin headlight 200mm diameter. More flat (135mm depth) than the original one, it offers a stronger look to your bike. The casing is in satin black metal, the hooping is available in chromed and brushed finish.

It enables you to keep the original optic with the Triumph logo in front of the bulb. It simply plugs on the original wiring harness of your Street Twin.

95 €

Engine protection for Triumph T120 / Street Twin

This sump guard / engine protection is made in aluminium. It gives a stronger look to your Triumph Street Twin, Bonneville T120 and T100 (from 2016) or Thruxton 1200. It's 3mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. 

This part is available in satin black or brushed finish.

115 €

Engine protection for Triumph - Satin black

This sump guard / engine protection is made in aluminium. It gives a stronger look to your Triumph Street Twin, Bonneville T120 and T100 (from 2016) or Thruxton 1200. It's 3mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. 

Available in satin black or brushed finish. It comes with all the necessary screwing for an easy mounting on your bike.

115 €

Bobber exhaust for Triumph (since 2016)

Bobber exhaust line, that suits the Triumph Street Twin, Bonneville T100 and T120 (since 2016), designed and manufactured at our workshop. The manifolds are stainless steel, the mufflers are aluminium. 

It provides a rough and deeper sound, without reasonance, but remains discreet. This part isn't approved for road use. 

1 250 €

Side number panel for Triumph Bonneville (since 2016)

Side number panel for Triumph Bonneville T120, Street Twin / Street Cup and T100 (since 2016) in brushed aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing. 

Available for Right or Left side, with the side cover in Brushed or Satin black finish.

127 €

Aluminium side covers for Triumph Street Twin / T120 / T100

Side covers for Triumph Bonneville T120, Street Twin / Street Cup and T100 (since 2016), made in aluminium. It replaces your original side covers to bring a strongest look to your motorcycle, using noble material.

Comes in pairs, with all the necessary screwing for left and right fixation. Available in brushed and satin black finish.

155 €

Fatbar handlebar

Fatbar handlebar and risers in aluminium. This bar is perfect to give a more impressive look to your bike. This wide handlebar allows a more comfortable riding position than the original ones. 

The centric part is 28mm diameter, which requires to adapt compatible handlebar clamps in Fatbar handlebar as the ones we offer in option with this part.

250 €

Fatbar handlebar with leather protection

Fatbar handlebar with crossbar and leather / foam protection. This handlebar has a 22mm diameter for the grips and 28,6mm diameter for the clamps. Its design offers a confortable riding position. It's only available in satin black powder coat painting. 

Can be provided with optional BAAK aluminium handlebar clamps.

160 €

BAAK N°1 handlebars

Wide stailness steel handlebars. It's flatter, wider and has more pullback / sweep to the driver than other handlebars. It will offer a very distinguised look to your motorcycle, and improve its handling qualities. 

The stainless steel tubes we selected, very thin and resistant, make it a good quality handlebar.

95 €

BAAK N°1 Handlebar crossbar

Wide stainless steel handlebar with crossbar. It offers a very comfortable driving position and great handling. It's flatter, wider and has more pullback to the driver than other handlebars. Its central crossbar offers a nice scrambler look.  

The stainless steel tubes we selected, very thin and resistant, make it a good quality handlebar.

125 €

Flat track handlebar

Flat Track handlebar manufactured in steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. 

Available in 1 inch' (25,4mm) and 22mm diameter. It's 81cm wide and 13cm high.

69 €

Aluminium handlebar clamps

Machined aluminium handlebar clamps for motorcycle. These risers are available in Fatbar diameter (28,6mm) or 1 inch diameter (25,4mm), it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing.

Designed and manufactured at BAAK's workshop.

135 €

Kit long cables for Triumph (new generation)

Long cables kit for Triumph (after 2016), it enables to mount wide handlebars on your bike. This kit includes the front brake hose extension and the clutch cable. 

Suits the Triumph Bonneville T100 / T120, Street Twin / Street Scrambler and Thruxton 1200. 

65 €

Leather cables guide

Leather cable guide. This strap enables you to fasten you cables, or tie it together to your handlebar. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. 

Available in Aged brown, Black and Gold leather. Available in 85mm, 105mm, 120mm or 135mmlenght. 20mm wide. 

Doesn't come in pairs.

8 €

Universal leather tank bag - Aged brown

Universal leather gas tank saddlebag. This discreet bag enables you to bring some stuff with you while riding. It's assembled with snaps on an adjustable leather strap that wraps the tank of side gas tank cap motorcycles. 

Its front pocket has a transparent touch-sensitive cover that enable to watch and use a GPS, smartphone or road map while travelling.

335 €

Bindings headlight

Motorcycle headlight bracket, for M8 side fixation. The brackets are designed and manufactured in BAAK's workshop in France.

Only available in satin black.

  • Ø41mm for TRiumph Bonneville (60mm length for original lighthouse)
  • 40mm and 60mm length for Moto Guzzi V7
  • Ø41mm and length 60mm for Triumph Street and Twin T120 (Doesn't fit with original headlight)

99 €

Scroll To Top