Bonneville Bobber (2017 -...)

Showing 1-35 of 35 item(s)

Bates headlight support - Triumph 1200 Bobber

Home

Bates headlight support - Triumph 1200 Bobber

Bates headlight mounting bracket for Triumph Bobber 1200. This bracket attaches to the lower triple tree of the Triumph Bobber 1200. This allows for the installation of a lower-mount Bates headlight. Made of 4mm thick stainless steel. Satin black epoxy paint.

Parts

Round 21W turn indicators

€69.00

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.

Parts

Mini LED turn signal mo.blaze Pin

€54.00

Motogadget LED mini indicator 3W minimalist design in aluminum with Ø8mm stem. When off, the indicators are almost invisible, yet they offer ideal brightness when in use. We use them on most of our custom builds. Each indicator is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Indicator dimensions: 19.5mm x...

View

Bouchon plat de réservoir pour triumph 2

-30%

Parts

Flat fuel tank cap for Triumph

€40.60 €58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

View

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

-35%

Parts

Front turn indicators bracket for Triumph Bobber 1200

€16.25 €25.00

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

View

Parts

Turn indicators / Brake light

€156.00

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical. CE-approved

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

€29.25 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

View

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

€29.25 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Universal

Universal handlebars controls kit

€198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

€24.00

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

View

Parts

License plate lightning

€18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

€18.00 €30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

Triumph

Classic Headlight / Integrated Speedometer for Triumph (2016–...)

€1,500.00

Classic Headlight / Integrated Speedometer for Triumph (2016–... – Liquid-cooled) Integrated into the housing of a ø180mm Classic headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while keeping the original information display and ensuring optimal readability. The speedometer...

View

Triumph

Bates headlight / integrated speedometer for Triumph (2016-...)

€1,350.00

Bates headlight / integrated speedometer for Triumph (2016-... / Liquid cooling) Integrated into the housing of a ø150mm Bates headlight, this motogadget Tiny Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while retaining the information from your original speedometer. The assembly is delivered pre-wired, with...

View

Leather seat for Triumph Bobber 1200 (2017-...)

Bonneville Bobber (2017 -...)

Leather seat for Triumph Bobber

€600.00

Leather seat for Triumph Bonneville Bobber 1200 (2017-...). This seat has the same shape as your original one, and a perfect finish level thanks to the great quality leather we selected and its diamonds-shape quilting on the seating area. This seat is manufactured by our craftsmen at BAAK's workshop in France. It's available in Aged brown, Black, Gold...

View

Mini front mudguard for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Mini front mudguard for Triumph Bobber

€168.00 €210.00

Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled and comes with its fixation bracket so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for the...

View

Classic mini front mudguard for Triumph Bobber

Classic mini front mudguard for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Classic mini front mudguard for Triumph Bobber

€168.00 €210.00

Classic Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't compatible with the models Bobber Black, Bobber TFC and...

Classic Medium front mudguard for Triumph Bobber

Classic Medium front mudguard for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Classic Medium front mudguard for Triumph Bobber

€168.00 €210.00

Classic Medium front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its mudguard fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for Triumph Bobber Black, Bobber TFC...

View

License plate holder for Triumph Bobber original mudguard (2017)

License plate holder for Triumph Bobber original mudguard (2017) 2

-30%

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€126.00 €180.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

View

Front turn indicators bracket for Triumph

-35%

Triumph

Front turn indicators bracket for Triumph

€19.50 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

View

Parts

Headlight bulb wiring extension

€19.00

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

Parts

Heritage headlight

€99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

View

Parts

Classic headlight

€90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

View

Original turn indicators brackets kit for Triumph (2016)

-35%

Triumph

Original turn indicators brackets kit for Triumph (2016)

€19.50 €30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

View

Turn indicators wiring harness for Triumph (2016-...)

Parts

Turn indicators wiring harness for Triumph (2016)

€29.00

This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket...

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View

Parts

Leather Conditioner

€18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

€24.00

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Parts

Exhaust wrap

€93.60

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

View

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...