Bonneville Bobber (2017 -...)

Bonneville Bobber (2017 -...)

Showing 1-21 of 21 item(s)

Universal Round LED Turn Signals in Aluminum - BAAK

Universal Round LED Turn Signals in Aluminum - BAAK 2

Parts

Turn signals Round - LED 5W version

Discover our Round turn signals in LED version. Made from aluminum with a 40mm diameter, 5W LED bulbs and an M10 mounting stem. These universal turn signals feature a very fine finish, they are small enough to be discreet and elegant, yet large enough to deliver a vintage look perfectly neo-retro. This LED version provides compatibility with the...

Headlight bracket Bates - Triumph 1200 Bobber

Headlight bracket Bates - Triumph 1200 Bobber 2

Bonneville Bobber (2017 -...)

Headlight bracket Bates - Triumph 1200 Bobber

Headlight mounting plate Bates for Triumph Bobber 1200. This plate mounts on the lower fork yoke of the Triumph Bobber 1200, allowing installation of a Bates headlight with bottom mounting. Made from 4mm thick stainless steel. Satin black epoxy paint.

Mini turn signal LED mo.blaze Pin

Mini turn signal LED mo.blaze Pin 2

Parts

Mini turn signal LED mo.blaze Pin

Mini motogadget LED turn signal 3W minimalist aluminium turn signal with an Ø8mm mounting stem. When off, these turn signals are almost invisible, while providing ideal brightness in operation. We use them on the majority of our custom projects. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your...

View

Micro turn signal LED mo.blaze Tens1

Micro turn signal LED mo.blaze Tens1 2

Universal

Micro turn signal LED mo.blaze Tens1

Micro motogadget LED turn signal minimalist aluminum unit with Ø8mm mounting stem. The motogadget mo.blaze tens is one of the smallest certified turn signals in the world. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Finish choice in Black or polished Aluminum finish. Turn signal...

View

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish 2

Parts

LED motorcycle turn signals type Bullet black/brushed bezel

Round LED 10W motorcycle turn signals, Bullet-style in black aluminum with brushed trim, simply beautiful. With a clear lens, they measure 20 mm in diameter and 36.5 mm in length. They install easily using a screw mounting (M8mm) and are compatible with a 12 V system. Delivered sleeved and with crimped Japanese round terminals ø3.2mm Approved to CE...

View

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

-20%

Parts

Turn signal brackets for Triumph Bobber 1200

$22.92 $28.65

Time left

Kit of turn signal brackets to relocate the front turn signals of your Triumph Bobber 1200 and thus streamline its lines. The bracket mounts at the level of your oil radiator.

View

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi 2

Parts

Turn Signals + Brake Light 3-in-1 - Full Black

These elegant aluminium turn signals streamline your motorcycle. The rear turn signals integrate brake lights and position lights. The front turn signals are classic and only provide the turn signal function. Powerful lighting. Stem M8 ø, 38mm long, 22mm ø lens.

View

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK 2

Parts

Universal Trail headlight plate

Our universal dual-headlight headlight fairing draws its inspiration from 1980s trail bikes. Ideal for a Scrambler project, this fairing is designed by us and made from fiberglass. It includes an extension of the wiring harness and aluminum mounting brackets that attach to the fork tubes (ø39 - ø40mm / ø41 - ø42mm / ø43mm optional).We offer it in a raw...

View

BAAK License plate lightning

BAAK License plate lightning 2

Parts

Universal license plate lighting

LED license plate light. This license plate light is approved to European ECE standards (12V / 2W). We use it on some of the license plate brackets manufactured at the BAAK workshop. License plate light dimensions: Length 17mm Diameter 12mm Mounting stem øM8.

Aluminum turn signal brackets for license plate bracket

Aluminum turn signal brackets for license plate bracket 2

Parts

Turn signal brackets on license-plate bracket - Universal

Turn signal brackets for license plate mount. These stainless steel turn signal mounting plates attach to your BAAK license plate bracket on the motorcycle of your choice. They are available in 3 versions: For turn signals with øM8 stem For turn signals with øM10 stem For original/accessory Triumph turn signals (2016-...) Supplied with stainless steel...

View

Classic headlight with integrated speedo for Triumph (2016-...) by BAAK

Classic headlight with integrated speedo for Triumph (2016-...) by BAAK 2

Triumph

Classic headlight with integrated gauge for Triumph (after 2016)

Classic Headlight / Integrated Speedometer for Triumph Integrated into the nacelle of a Classic ø180mm headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to tidy the cockpit of your Triumph while retaining the information from your original instrument and ensuring optimal readability. The speedometer dial is available...

View

Bates headlight / Integrated speedometer for Triumph (2016-...) by BAAK

Bates headlight / Integrated speedometer for Triumph (2016-...) by BAAK 2

Triumph

Bates headlight with integrated speedo for Triumph (after 2016)

Bates headlight / integrated speedometer for Triumph Integrated into a Bates housing ø150mm, this motogadget Tiny Plug & Play speedometer is a simple solution to clean up the cockpit of your Triumph while keeping the information from your original instrument. The assembly is delivered pre-wired, with its multiplexing box, its wiring harness, and its...

View

License plate bracket for original Triumph Bobber fender (2017-...)

License plate bracket for original Triumph Bobber fender (2017-...) 2

Bonneville Bobber (2017 -...)

License plate bracket for original Triumph Bobber fender (2017-...)

License plate bracket for original fender of Triumph Bonneville Bobber (2017-...). This rear light / license plate bracket assembly replaces the original unit. It is fitted with an EU-approved vintage LED tail light with integrated LED license plate illumination, a triangular license plate bracket, a plug & play wiring harness, optional turn signals...

View

Front turn signal bracket for Triumph

Front turn signal bracket for Triumph 2

Triumph

Front turn signal bracket for Triumph

Front turn signal bracket for Triumph, simple, effective and above all very discreet. Made of laser-cut stainless steel and painted in satin black epoxy. Matches our Regulator bracket for Triumph, or can be bolted to the upper mount of your oil cooler. This bracket is compatible with classic Triumphs older models (pre-2016) and newer models (2016-...)....

Headlight wiring harness extension

Parts

Headlight wiring harness extension

This headlight bulb extender is compatible with any motorcycle fitted with an H4 bulb. It allows you to reconnect your headlight to the machine if you relocate part of the original wiring harness. Length: 420mm. Handcrafted at the BAAK workshop. This extender is supplied by default with all headlights for Triumph, Moto Guzzi and Royal Enfield.

Heritage headlight

Heritage headlight 2

Parts

Heritage headlight

Heritage front headlight for motorcycle. This side-mount M8 headlight measures ø180mm in diameter. Bowl and bezel in metal, its lens is plastic. This headlight offers an exceptional level of finish; its flat bowl will give your machine a more compact look. It is offered with a Brushed or Chrome bezel. Our universal headlight protection grille fits this...

View

Classic Front Headlight ø180mm - Universal

Classic Front Headlight ø180mm - Universal 2

Parts

Classic Front Headlight ø180mm - Universal

Round front headlight for classic motorcycles, with M8 side mounting and a diameter of ø180mm. It features a metal bucket and bezel, with a plastic lens, providing an exceptional level of finish. Its profiled bucket gives it a decidedly classic look. Depending on the chosen motorcycle model, a plug-and-play wiring harness is supplied (which may explain a...

View

Turn signal bracket kit for original front and rear for Triumph (after 2016)

Turn signal bracket kit for original front and rear for Triumph (after 2016) 2

-20%

Triumph

Turn signal bracket kit for original front and rear for Triumph (after 2016)

$27.50 $34.38

Time left

Turn signal mounting kit allowing relocation of Triumph original and accessory turn signals that have a mounting locator, thereby streamlining the lines of your machine. The front bracket fits at the level of your oil radiator, the rear brackets on the upper shock absorber pivots. These brackets are sold without turn signals.

View

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn signal wiring harness for Triumph (after 2016)

This turn signal wiring harness is essential for fitting new turn signals to your Triumph (2016-... liquid-cooled). The harness is plug & play on your motorcycle’s original terminals. This 160mm harness is ideal for installing aftermarket turn signals. Supplied in pairs.

Headlight spacers

Headlight spacers 2

Parts

Headlight spacers

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 bulb (yellow)

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.