Parts » Moto Guzzi » v7 I And v7 Ii

Leather cable guide. This strap enables you to fasten you cables, or tie it together to your handlebar. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. 

Available in Aged brown, Black, Gold or Ruby leather. Available in 85mm, 105mm, 120mm or 135mmlenght. 20mm wide. 

Doesn't come in pairs.

Long cables kit for Moto Guzzi V7. Essential to fit a wide handlebars, from 76cm ​​wide.
Fits with Moto Guzzi V7 I, but doesn't suit Moto Guzzi V7 II.

The kit includes a clutch cable and brake hose. You don't need to change your accelerator cable.

Side covers for Moto Guzzi V7 I and V7 II, made in aluminium. It replaces the original side covers of your bike. These parts will bring a strongest look to your motorcycle, using noble material.

Comes in pairs, with all the necessary stainless steel screwing. Don't suit the Moto Guzzi V7 III.

Leather handlebar grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. 

Available in aged brown, gold, black and ruby leather. Four thread colours available so it perfectly suits your bike.

Available for 25,4mm (1 inch) and 22mm handlebars.

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility with its wide angle glass.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually. Fit both left and right sides, available in satin black only. 

Mini round mirror, Ø8cm with M8 threading, for upper position. The mirror stem is 13cm long, its shape was specificly designed to guaranty a good rear visibility and a discreet look.

Suits for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Classic round motorcycle mirror. This Ø100mm mirror offers a perfect finish while remaining discreet. It gives a great rear visibility and can be fitted on any motorcycle. Available in black only.

It can be adjusted thanks to its articulated 135m long shaft and to the kneecap of the mirror. 

It's sold per unit, and comes with two adapters (left thread and right thread).

Mini LED turn signals in aluminium. These blinkers are minimalistic, once switched off, it's nearly invisible wether it offers a perfect visibility when running. We use it on main part of our custom motorcycles project at the workshop.

Sold in pairs. Blinkers size : 19,5mm x 16mm. 12V / 3W.

Aluminium mini blinkers, 4cm diameter, 21W bulbs, made in aluminium.

Very nice finish, much more discreet than most of the original turn signals. We use it on the major part of our custom projects.

Sold in pairs. UE approved.

Mini blinkers. These small indicators are beautifully made and measures only 6cm long. They are bulbs indicators, classic and beautiful.

It's 21W bulbs blinkers.

Sold in pairs, it's an EU approved part.

Mini turn signals / blinkers made in plastic. With its M10 fixation, it comes in place of most of the original blinkers. 10w bulb included.

Much more discreet than the original blinkers, it offers a better finish to your motorcycle. Available with Long shaft (37mm) or Short shaft (17mm).

Sold in pairs. Blinkers dimension : 45x55mm. 

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. 

Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Short fork spring blocks. To adapt our shorter shocks, and proportionally belittle the front of your Triumph Bonneville / Scrambler / Thruxton or Moto Guzzi V7 I and II sice 2013, you will need these fork springs blocks.

It comes simply replacing the original ones. It comes with installation instructions.

Turn signals support for Moto Guzzi, simple, effective and very discreet. Stainless steel laser cut and epoxy painted in satin black.

It mounts on the upper regulator screw of your motorcycle. Suits Moto Guzzi V7 I, V7 II, V7 III and V9. Sold without blinkers.

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the shock absorber axis for a more discreet look. 

Comes in pairs. This part suits Moto Guzzi V7 I, V7 II, V7 III and V9.

Transparent mini turn signal bulb, 21 Watts, 12 Volts. Comes in pair.

Fixation bracket for Bates headlight, required for mounting a headlight in lower position on your motorcycle.

Made in aluminium, 4mm thick, brushed or black epoxy painting.

Motogadget Tiny speedometer fixation bracket. It's a machined aluminium bracket, satin black powder coated. It's available for Triumph Bonneville, Scrambler, Thruxton (old generation - before 2016) and for Moto Guzzi V7.

This part comes with all the necessary screwing.

Öhlins Black Edition fork for Moto Guzzi V7I & V7II. This is the most beautiful conventional style fork, it offers a great road feeling and a classic look.

We designed many bespoke parts in order to fit this part on the V7 : Triple yokes, stering column, wheels axles, caliper bracket, mudguard, progressive springs, headlight brackets...

Handlebar adapters, required for mounting some mirrors. We offer two different solutions : 

• 22mm handlebar adapter lower position, to mount our mini mirrors under your handlebar. 
• Through rod fixation adapter, to mount any type of mirror in upper position on a handlebar with a through rod type fixation, in upper or lower position.

Here are 15 meters from thermal wrap, 5 cm wide, to bundle up your exhaust system and give you a look of BAD BOY.

For black color, we recommend you to paint it with a special high temperature painting, so the color can resist over the months.

It's a great quality part, beware of low-cost ones! Comes with 8 optional stainless steel collars.

These collars are essential to mount your heat tape, do not tell us that you would commonly twist an old wire !

Set of 8 self-locking collars.

Thruster left and right handlebar grips produced by Biltwell motorcycles. Allows a better handtaking of your handlebar, and an incredible look.

Available in black and brown. Comes in pairs.

Handlebar diameter 1 "or 22mm.

Left and right handlebar grips Renegade, produced by Biltwell for character motorcycle. Allows a better handtaking of your handlebar, and an incredible look.

Handlebar diameter 1 "or 22mm. Comes in pairs.

This cream is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc.

Capacity : 150 ml.

Motorcycle headlight struts, made in aluminium, to perfectlly adjust the fixation of your headlight. The hole diameter is 8mm, the exterior diameter is 29mm.

For Moto Guzzi V7 headlight : 10mm

For Triumph headlight : 5mm

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness.

Length : 420mm