Parts » Triumph » Thruxton (Before 2016)

Side number panel for Triumph (before 2016)

Side number panel for Triumph Bonneville, Scrambler and Thruxton (before 2016 - air cooled) in brushed aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing. 

Available for Right or Left side, with the side cover in Brushed or Satin black finish.

127 €

Beringer braking kit for Triumph

Beringer complete front braking kit for Triumph. This kit is composed of a radial 4 pistons caliper, a Classic disk, a clutch control and a master cylinder. It garantees an better braking feeling and an improved power during every braking action.
The quality of these elements assures a great look for your motorbike. It's possible to buy each element of the kit separately. 

420 €

Monza gas cap

Monza gas tank cap. The legendary Monza cap will perfectly suit your gas tank thanks to our exclusive adapter. 

The full kit includes the gas cap, the seal, the necessary screwing and the adapter. This part is manufactured in aluminium, it's polished finish.

Beware of poor quality copies.

129 €

Flat track handlebar

Flat Track handlebar manufactured in steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. 

Available in 1 inch' (25,4mm) and 22mm diameter. It's 81cm wide and 13cm high.

69 €

Mini front fender for Triumph

Mini stainless steel front mudguard for Triumph, perfect to modify the look of your motorcycle while keeping a good protection.

It's pre-drilled for the bike of your choice : Triumph Bonneville, Scrambler, Thruxton, and the new Street Twin, Street Scrambler, T100 and T120 from 2016. 

115 €

Medium front mudguard for Triumph

Stainless steel medium front mudguard for Triumph, perfect to visually lighten the look of your motorcycle while keeping a good protection.

This front fender is pre-drilled for the bike of your choice : Triumph Bonneville, Scrambler, Thruxton, and the new Street Twin, Street Scrambler, Thruxton, T100 and T120 2016. 

135 €

High front mudguard for Triumph

High front mudguard for Triumph, perfect to give a Scrambler look to your ride while keeping a good protection.

This stainless steel front fender comes with a satin black bracket to attach it on your lower fork triple trees. Available for Triumph Bonneville, Scrambler and Thruxton (before 2016).

165 €

Leather saddle for Triumph

This flat leather seat for Triumph is handcrafted at our workshop. It's narrower than the original one (-2,5cm), which considerably improves the look of your Triumph. We use an high quality french leather to manufacture this seat. 

The foam thickness is 6cm, which gives a good comfort and a flat saddle look.

It fits with Triumph Bonneville (T100 & SE), Scrambler and Thruxton before 2016. 

550 €

Leather seat for Triumph

This leather seat for Triumph will increase the finish of your bike. Developed and manufactured entirely at BAAK's workshop in France.

Much narrower than the original (-2.5cm), it has a perfect thickness to keep comfort (6cm) and style. This saddle comes with a free BAAK special cream to maintain the leather in good shape.

Suits Triumph Bonneville (T100 & SE), Thruxton, Scrambler (before 2016).

550 €

Shims short fork spring

Short fork spring blocks. To adapt our shorter shocks, and proportionally belittle the front of your Triumph Bonneville / Scrambler / Thruxton or Moto Guzzi V7 I and II, you will need these fork springs blocks.

It comes simply replacing the original ones. It comes with installation instructions.

19 €

Fork kit for Triumph (springs + short blocks)

This kit enables you to easily improve the front end performances of your Triumph. It includes Hagon progressive fork springs and optionnal short fork blocks that reduce the eight of your bike of 2,5cm.

This kit fits with Triumph Bonneville (T100 / SE) and Thruxton, EFI or carburetor.

145 €

Leather cables guide

Leather cable guide. This strap enables you to fasten you cables, or tie it together to your handlebar. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. 

Available in Aged brown, Black, Gold or Ruby leather. Available in 85mm, 105mm, 120mm or 135mmlenght. 20mm wide. 

Doesn't come in pairs.

8 €

AIS Removal Kit

AIS system removal kit for Triumph. This anti-pollution system restrains your engine and tends to make your exhaust manifold become blue. The removal of this system thanks to our kit will also offer more progressive slowing down (no more backfire)

Fits the Triumph Bonneville, Thruxton and Scrambler with carburetor.

Bonneville, Thruxton and Scrambler Triumph has carburetors.

19 €

Removal Kit lambda sensors

Installation of this kit eliminates the lambda probes / sensors, to lure the injection system so your engine can provide more power, better engine rev increase and a more stable ticking over.

Fits the Triumph Bonneville T100 (2006 - ...), Scrambler, Thruxton, Thruxton 1200, Street Twin, Street Scrambler et T120.

59 €

Regulator - Turn signals - Horn support for Triumph

This bracket enables you to relocate your rectifier, front turn signals and horn below your steering column. Visually lightens the line of the front of your bike by grouping these parts on one support.

Fits with Triumph Bonneville (T100 / SE), Thruxton and scrambler, EFI or carburetor (2001 - 2016).

Manufactured in stainless steel at our workshop, satin black powder coat painted.

49 €

Front bracket flashing for Triumph

This turn signal bracket / support for Triumph is simple, effective and very discreet. Stainless steel laser cut and satin black powder coated.

Fits with the bracket regulator Triumph, or can be screwed on the superior fixing of the oil radiator.

Triumph Bonneville (before 2016), Thruxton, Scrambler, Street Twin, Street Scrambler, T100 and T120. 

19 €

Rear turn signal support for Triumph

Rear turn signals support for Triumph. Simple, effective and very discreet.  Stainless steel bracket laser cut (3mm thick) and satin black powder coat painted.

Fits with any rear fender. Delivered without turn signals.

Suits the Triumph Bonneville, Scrambler and Thruxton before 2016.

22 €

Switch Bracket for Triumph

Switch / ignition bracket for Triumph. This simple switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits right side on the injection models (EFI).

It requires to move the wiring harness that is in your headlight, under the gas tank, without having to lengthen any electric cable. 

Aluminum, laser cut, satin black powder coat painted.

49 €

Rectifier bracket for Triumph

This bracket enables you to relocate the voltage rectifier, in place of the horn. The horn can be attached below, on the same bracket.

I's manufactured in aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank.

Suits the Triumph Bonneville, Thruxton and Scrambler (before 2016 - air cooled).

30 €

Fork gaiters in silicone

High quality silicone fork gaiters. For the following diameters fork tubes :

  • Ø41mm : Bonneville, Scrambler and Thruxton T100, Street Twin and T120. 
  • Ø40mm : Moto Guzzi V7 I, V7 II, V7 III, and V9, Royal Enfield Continental GT.

Comes in pairs.

49 €

Oil temperature gauge Triumph

Oil temperature screw gauge, comes in place of the original oil filler cap. Allows you to monitor the oil temperature of your engine.

Fits with Triumph Bonneville, Thruxton, Scrambler, T120, T100 (from 2016) and Street Twin.

32 €

Mini LED turn signals

Mini LED turn signals in aluminium. These blinkers are minimalistic, once switched off, it's nearly invisible wether it offers a perfect visibility when running. We use it on main part of our custom motorcycles project at the workshop.

Sold in pairs. Blinkers size : 19,5mm x 16mm. 12V / 3W.

78 €

Mini round aluminum flashing.

Aluminium mini blinkers, 4cm diameter, 21W bulbs, made in aluminium.

Very nice finish, much more discreet than most of the original turn signals. We use it on the major part of our custom projects.

Sold in pairs. UE approved.

55 €

Mini Turn Signals

Mini blinkers. These small indicators are beautifully made and measures only 6cm long. They are bulbs indicators, classic and beautiful.

It's 21W bulbs blinkers.

Sold in pairs, it's an EU approved part.

19 €

Rear turn signals brackets for Triumph

Rear turn signals bracket for Triumph Bonneville, Scrambler, Thruxton, Street Twin, T100 (from 2016) and T120.

Enables you to mount your turn signals on the shock absorber axis for a more discreet look. Compatible with the original passenger grab handle.
Flashing Axis ø10mm, shock absorber axis Ø14mm or Ø16mm, length 50mm.

Comes in pairs.

19 €

Triumph spoked rim

Aluminium spoked wheels for Triumph. This set of satin black (epoxy painted) aluminium rims and stainless steel spokes is lightweight and offers a great finish. It will give better handling to your motorcycle. 


Suits Triumph Bonneville, Scrambler or Thruxton (before 2016). Available in different sizes, only rims + spokes unassembled (not radiated). 

950 €

Scroll To Top