Thruxton (2004-2016)

Thruxton (2004-2016)

Showing 1-18 of 18 item(s)

Front and rear Classic fender pack for Triumph (pre-2016)

Front and rear Classic fender pack for Triumph (pre-2016) 2

-20%

Triumph

Front and rear Classic fender pack for Triumph (pre-2016)

$385.06 $481.32

Time left

Front and rear fender pack for Triumph before 2016 - Bonneville - Thruxton - Scrambler. Designed to give your Triumph a retro, premium look while improving usability, this Classic fender pack delivers a more balanced silhouette, a timeless style and careful finishing down to the last detail.Made from stainless steel, the front and rear fenders combine...

View

Bracket for large leather saddlebag for short seat kit Triumph (before 2016)

Bracket for large leather saddlebag for short seat kit Triumph (before 2016) 2

-20%

Triumph

Bracket for large leather saddlebag for short seat kit Triumph (before 2016)

$220.03 $275.04

Time left

Designed for our large removable leather saddlebags rolled or satchel-style, this bracket is compatible with our Triumph short seat kit (pre-2016) This bracket meets the need to be able to fit one or two large leather saddlebags only if you have a BAAK short seat kit. The bracket can be easily screwed on or off so you do not have to keep it permanently...

View

Accessory bracket for 41mm fork tube - Universal

Accessory bracket for 41mm fork tube - Universal 2

-20%

Parts

Accessory bracket for 41mm fork tube - Universal

$41.26 $51.57

Time left

This aluminum bracket mounts to your original fork tube to allow you to attach accessories such as a speedometer, GPS, switch, etc. Compatible with all ø41mm forks. M8 thread.

Rear brake caliper protector Triumph

Rear brake caliper protector Triumph 2

-20%

Triumph

Rear brake caliper protector Triumph

$33.00 $41.26

Time left

Protect your rear brake caliper with this stainless-steel guard specially designed for Triumph motorcycles. The rear caliper on your Triumph sits below the wheel axle and is therefore highly exposed to stone impacts off-road and to curbs in town. This caliper guard is specifically shaped to cover the caliper and reduce the risk of damage from impacts....

View

Universal reflector for license plate

Universal reflector for license plate 2

-20%

Home

Universal reflector for license plate

$9.08 $11.35

Time left

Black finish, mounts on license plate bracket or directly on the license plate.

Classic side covers for Speed Twin 1200 / Thruxton 1200

Classic side covers for Speed Twin 1200 / Thruxton 1200 2

-20%

Home

Classic side covers for Speed Twin 1200 / Thruxton 1200

$68.76 $85.95

Time left

Classic side covers for Triumph (from 2016), designed and manufactured in aluminum at our workshop in France. These covers replace the original side panels of your machine to give it a more assertive look. Available for the right or left side. Supplied with the necessary mounting hardware. Available in Brushed or Satin Black finish. These side covers...

View

US license plate bracket with license plate light bracket

US license plate bracket with license plate light bracket 2

-20%

Parts

US license plate bracket with license plate light bracket

$20.90 $26.13

Time left

This license plate bracket is suited to US-format (horizontal) license plates. It is made from 3mm thick aluminum, finished in satin black epoxy paint. This bracket allows mounting a license plate light. It is mandatory to purchase one of our license plate brackets offered by BAAK.

License plate bracket for US side-mounted plate

License plate bracket for US side-mounted plate 2

-20%

Parts

License plate bracket for US side license plate

$20.90 $26.13

Time left

This license plate bracket is suited to US-format (vertical) license plates mounted in a side position. It is made from 3mm-thick aluminum, painted with satin black epoxy paint. It is essential to purchase one of our BAAK side license plate brackets.

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph 2

-20%

Triumph

Classic Mini front fender for Triumph

$99.01 $123.77

Time left

Front Classic Mini Fender for Triumph, made from stainless steel. The mouldings at its ends give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. You can reuse the original fasteners. This Front Classic fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France....

View

Regulator bracket for Triumph (pre-2016)

Regulator bracket for Triumph (pre-2016) 2

-20%

Triumph

Regulator bracket for Triumph (pre-2016)

$27.50 $34.38

Time left

Regulator mounting plate for Triumph (pre-2016 - air-cooled). This bracket allows the voltage regulator to be relocated to the horn position. The horn can then be mounted below, on the same plate. Compatible with our Front turn signal bracket for Triumph. Laser-cut aluminium. Installation requires relocating your wiring harness under the tank. All...

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

Bracket for regulator / turn signals / horn for Triumph (pre-2016) 2

-20%

Triumph

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

$44.92 $56.15

Time left

Bracket allowing you to mount your regulator, front turn signals and horn on a single bracket, for Triumph (pre-2016 - air-cooled). This accessory visually lightens the lines of your motorcycle by relocating these parts beneath the steering head. This bracket measures 21.8 cm wide and 12 cm high. It mounts to the original horn anchor point. This...

Contact switch relocation kit for Triumph (before 2016)

Contact switch relocation kit for Triumph (before 2016) 2

-20%

Triumph

Contact switch relocation kit for Triumph (before 2016)

$44.92 $56.15

Time left

Switch bracket for Triumph (pre-2016). This bracket allows the ignition switch to be moved between the fuel tank and the left carburetor. It mounts on the right on fuel-injected (EFI) models. Its installation requires relocating under the tank the wiring harness that is normally in the headlight, without having to lengthen any electrical cables....

Support for Motogadget Tiny speedometer for Triumph (before 2016)

Support for Motogadget Tiny speedometer for Triumph (before 2016) 2

-20%

Triumph

Support for Motogadget Tiny speedometer for Triumph (before 2016)

$44.92 $56.15

Time left

Tiny Motogadget speedo mounting plate for Triumph (pre-2016). This is a machined aluminium plate, satin black epoxy painted. Available in Above the steering stem position, or in the classic position in front of the handlebars. This accessory is supplied with the fasteners required for installation.

View

Headlight plate for Bates Triumph (before 2016)

Headlight plate for Bates Triumph (before 2016) 2

-20%

Triumph

Headlight plate for Bates Triumph (before 2016)

$154.94 $193.67

Time left

Aluminium Bates-style headlight plate for Triumph (pre-2016 - air-cooled). Essential for a harmonious aesthetic behind a Bates headlight, it hides the steering column as well as all the cables. Supplied with 4 leather mounting straps in black / brown / gold or chocolate. Available in satin black and brushed aluminium finishes. Dimensions 220 x 190mm

View

Classic Medium front mudguard for Triumph

Classic Medium front mudguard for Triumph 2

-20%

Triumph

Front fender Classic Medium for Triumph

$110.02 $137.52

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Rear Classic fender for Triumph (pre-2016)

Rear Classic fender for Triumph (pre-2016) 2

-20%

Triumph

Rear Classic fender for Triumph (pre-2016)

$275.04 $343.80

Time left

This classic rear fender for Triumph (pre-2016) in stainless steel is handmade in France by our craftsmen. Its moulded tip gives it a finely worked look, with a classic spirit. It is shorter and more discreet than the original. This kit includes the pre-drilled fender for the selected motorcycle model, the stainless steel hardware kit, choice of turn...

View

Fork lowering shims for Triumph and Moto Guzzi

Fork lowering shims for Triumph and Moto Guzzi 2

-15%

Parts

Fork lowering shims for Triumph and Moto Guzzi

$18.50 $21.77

Time left

Short fork spring shims. To fit our short shocks and lower the front of your Triumph or Moto Guzzi proportionally, you will need these short fork spring shims. These shims are 2 cm shorter and replace the original shims.

View

Aluminium side covers for Triumph (pre- 2016)

Aluminium side covers for Triumph (pre- 2016) 2

-20%

Triumph

Classic side covers for Triumph (pre-2016)

$68.76 $85.95

Time left

Classic side covers for Triumph (pre-2016 - air-cooled), made from aluminium and available in Brushed or Satin Black finish. These covers replace your original plastic side covers. They give your machine a bolder look while concealing the air box. Supplied with the necessary mounting hardware. Available for right or left side.Made in France

View