Parts » Universal

Bindings headlight

Motorcycle headlight bracket, for M8 side fixation. The brackets are designed and manufactured in BAAK's workshop in France.

Only available in satin black.

  • Ø41mm for TRiumph Bonneville (60mm length for original lighthouse)
  • 40mm and 60mm length for Moto Guzzi V7
  • Ø41mm and length 60mm for Triumph Street and Twin T120 (Doesn't fit with original headlight)
  • Ø43mm for BMW NineT

99 €

Leather handlebar grips

Leather handlebar grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. 

Available in aged brown, gold, black and ruby leather. Four thread colours available so it perfectly suits your bike.

Available for 25,4mm (1 inch) and 22mm handlebars.

145 €

Handlebar grips

Left and right handlebar grips Renegade, produced by Biltwell for character motorcycle. Allows a better handtaking of your handlebar, and an incredible look.

Handlebar diameter 1 "or 22mm. Comes in pairs.

18 €

Handlebar grips

Thruster left and right handlebar grips produced by Biltwell motorcycles. Allows a better handtaking of your handlebar, and an incredible look.

Available in black and brown. Comes in pairs.

Handlebar diameter 1 "or 22mm.

18 €

Street Bar handlebars with optional handlebar clamps

Street Bar handlebar and risers / clamps in aluminium. This bar is perfect to give a more agressive look to your motorcycle and a more sporty riding position.  

The centric part / clamping area is 28,6mm diameter, the ends are 22mm diameter, which can require to adapt compatible handlebar clamps in Fat-bar handlebar as the ones we offer in option with this part.

115 €

Street Bar handlebar with leather protection

Street Bar handlebar with crossbar and leather / foam protection. This handlebar has a 22mm diameter for the grips and 28,6mm diameter for the clamps. Its design offers a confortable riding position. It's only available in satin black powder coat painting. 

Can be provided with optional BAAK aluminium handlebar clamps.

160 €

Handlebar

Tracker Bar, made out of steel. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a combortable riding position. 

It's available in satin black finish only.

115 €

BAAK N°1 handlebars - Satin black

Wide stailness steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguised look to your motorcycle, and improve its handling qualities and your riding position. 

The stainless steel tubes we selected, very thin and resistant, makes it a good quality part.

115 €

BAAK N°1 handlebars - Ø22mm

Wide stainless steel BAAK N°1 handlebars in Ø22mm diameter. It's flatter, wider and has more pullback / sweep to the driver than most of the other handlebars. It will offer a very distinguised look to your motorcycle, improves its handling qualities and your riding position. 

The stainless steel tubes we selected, very thin and resistant, makes it a great quality part.

95 €

BAAK N°1 Handlebar crossbar

Wide stainless steel handlebar with crossbar. It offers a very comfortable driving position and great handling. It's flatter, wider and has more pullback to the driver than other handlebars. Its central crossbar offers a nice scrambler look.  

The stainless steel tubes we selected, very thin and resistant, make it a good quality handlebar.

145 €

Flat track handlebars

Flat Track handlebar manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. 

Available in Ø22mm diameter, and in Chromed or Brushed finish. 

69 €

Scrambler chromed handlebars

Scrambler chromed handlebars, 22mm diameter. Made out of steel, it offers a better finish level than most of the original handlebars. It's high and has a good pullback / swipe to the rider, which gives a better driving position and comfort. 

With its central bar, it will offer a real scrambler look to your motorcycle.

65 €

Aluminium handlebar clamps

Machined aluminium handlebar clamps for motorcycle. These risers are available in 22mm diameter, 28,6mm diameter or 1 inch diameter (25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing.

Designed and manufactured at BAAK's workshop.

135 €

Leather cables guide

Leather cable guide. This strap enables you to fasten you cables, or tie it together to your handlebar. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. 

Available in Aged brown, Black, Gold or Ruby leather. Available in 85mm, 105mm, 120mm or 135mmlenght. 20mm wide. 

Doesn't come in pairs.

8 €

Leather cell phone mount - Aged brown

Universal cell phone mount made out of leather. This tiny bag is design to be assembled on your motorcycle handlebar. It enables you watch and use your smartphone while riding has its front transparent surface is touch sensitive. It gets closed thanks to a velcro that makes it easy to connect the phone cable while riding.

Available in Aged brown, Black, Ruby or Gold genuine leather.

125 €

Thermal tape

Here are 15 meters from thermal wrap, 5 cm wide, to bundle up your exhaust system and give you a look of BAD BOY.

For black color, we recommend you to paint it with a special high temperature painting, so the color can resist over the months.

It's a great quality part, beware of low-cost ones! Comes with 8 optional stainless steel collars.

83 €

Bates type taillight

Bates type LED taillight for motorcycle. This universal black light can be assembled on your rear mudguard. The fixation enable you to adjust the inclination of the taillight. Available in Full black, and with a Brushed or Chromed trim ring.

50mm diameter. This taillight is EU approved.

39 €

Vintage taillight

Round motorcycle taillight made in metal. Ø65mm, with Led light. It includes a license plate lightning under the light.

It is painted in black epoxy, available with or without STOP brushed cover. Much more discreet than the original taillights, and a will give your bike great vintage look.

44 €

Old school taillight

Old school LED motoryclce taillight with integrated license plate lightning and fix license plate support. Really discreet and effective.

Measurement : 45mm diameter, 70mm depth. 

This taillight is EU approved.

69 €

Camembert air filters

"Camembert" style round air filter. This pair of air filters offer a retro look and a great filtration quality to your motorcycle. 

  • Connection sleeve : Ø53,5mm
  • Filter : Ø139mm and 41mm thick.

Comes in pair with two stainless steel fixation collars.

85 €

Mini round mirror

Mini round mirror, Ø8cm with M8 threading, for upper position. The mirror stem is 13cm long, its shape was specificly designed to guaranty a good rear visibility and a discreet look.

Suits for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

29 €

Under handlebar mirror

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility with its wide angle glass.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually. Fit both left and right sides, available in satin black only. 

34 €

Classic round mirror

Classic round motorcycle mirror. This Ø100mm mirror offers a perfect finish while remaining discreet. It gives a great rear visibility and can be fitted on any motorcycle. Available in black only.

It can be adjusted thanks to its articulated 135m long shaft and to the kneecap of the mirror. 

It's sold per unit, and comes with two adapters (left thread and right thread).

45 €

Handlebar mirror adapter

Handlebar adapters, required for mounting some mirrors. We offer two different solutions : 

  • 22mm handlebar adapter lower position, to mount our mini mirrors under your handlebar. 
  • Through rod fixation adapter, to mount any type of mirror in upper position on a handlebar with a through rod type fixation, in upper or lower position.

15 €

Brake lights / license plate bracket

Approved LED rear brake light round vintage, with integrated license plate lightning, mounted on a universal plate holder.
To adapt the fender of your choice. Between centers of 45mm mounting holes M5. Supplied with stainless hardware.

Light dimension : Diameter 70mm / Depth 50mm.

65 €

Documents tube holder

This tube motorcycles documents holder enables you place your insurance card / document anywhere on your motorcycle. This cylinder is waterproof, the card remains perfectly visible, it's easy to assemble anywhere on the motorcycle. Available in black color only.

Height : 70mm / Diameter : 20mm.

32 €

Scroll To Top