Parts » Universal

300x125mm universal brushed front fender

Short and wide front fender / mudguard, perfect for a cafe racer, scrambler or bobber project. The fender is not pre-drilled. It's up to you to drill your holes to fit on your bike. 

Measurements : 300x125mm 

Available finishes:

  • Brushed
  • Satin Black
  • To be painted - powder coat primer
  • Glossy black
  • Polished

This front mudguard is handcrafted at our workshop in France.

95 €

Classic short front mudguard Universal - Brushed

Short Classic universal front mudguard, perfect to improve the look of your motorcycle while keeping a good protection against the front wheel projections. It's manufactured out of stainless steel and offers a perfect finish level.

This front fender isn't pre-drilled so it can be fitted on any motorcycle. Available in 4 different finishes.

75 €

Classic Medium front mudguard Universal

Medium Classic universal front mudguard, perfect to improve the front of your motorcycle while keeping a good protection against the front wheel splashes. It's made out of stainless steel and offers a great finish level.

This front fender isn't pre-drilled so it can be fitted on any motorcycle for your custom project. Available in 5 different finishes.

95 €

Universal mini rear fender

Mini universal rear fender, made of stainless steel. Comes with a license plate support, an EU approved taillight with an integrated license plate lightning. 

This rear fender isn't drilled so you can adapt it on the motorcycle of your choice. This mudguard is designed and handcrafted at our workshop.

285 €

Universal short rear fender

Short universal rear mudguard, made of stainless steel. Comes with a license plate support and an EU approved round taillight with an integrated license plate lightning. 

This rear fender isn't drilled so you can fit it on the motorcycle of your choice. Handcrafted at BAAK's workshop.

285 €

Universal Medium leather saddlebag

Universal leather side saddlebag for motorcycle. Handcrafted at our workshop, it enable you to bring some objects while you ride, and gives a great vintage look to your motorcycle. 

The bottom of the saddle is pre-drilled (120mm enter-axis) so you can assemble it easily on your bike. The necessary fixation screwing is supplied.

145 €

Universal leather Mini saddlebag

Universal side leather saddlebag in Mini size. This discreet saddlebag is handcrafted at our workshop. It enables you to bring some objects and will suit well with the retro look motorcycle. 

It comes with all the necessary stainless steel screwing and is pre-drilled so it can be fitted on any motorcycle side cover.

145 €

Leather fork gaiters + stainless steel collar

Pair of genuine leather fork gaiters. These 4, 6 or 8 folds fork gaiters are handmade in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. 

Diameter Ø41mm top and Ø63mm bottom, fits for Triumph Bonneville, Thruxton, Scrambler, Street Twin, T120 and Thruxton (except R version) and Moto Guzzi V7.

190 €

Black leather gas tank strap

Universal leather gas tank strap / belt, fits with any gas tank with cap on the side. It gives a distinguished look to your motorcycle tank. 

It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. It particularly fits for Triumph Bonneville, Scrambler, Thruxton, Street Twin and T120. Maximum lenght 190cm, minimum 107cm.

95 €

Universal 3 buttons handlebar controls

Universal handlebar controls, including a Turn signals switch and 2 push buttons, hold by a leather strap. It's available for 22mm or 25,4mm (1 inch) diameter handlebar. The push buttons can be linked to any functions on the motorcycle. 

Manufactured out of machined aluminium, satin black powder coat painted. This parts is supposed to be screwed on your handlebar.

300 €

Universal 1 button handlebar control

Universal 1 push button handlebar control, manufactured out of machined aluminium and available for 22mm or 25,4mm (1 inch) diameter handlebar. The push buttons can be linked to any functions on the motorcycle.

This part is powder coated, and designed to be screwed on your handlebar. Diameter : 30mm / Thickness : 17mm.

200 €

Universal Bates headlight / speedometer

Here's how to purify your machine while keeping all original features of a speedometer. The mini speedometer shows the total daily mileage, LED indicator, oil pressure, high beam and neutral. Button operation speedometer integrates discreetly the casing of the lighthouse.

Lighthouse Ø15cm to lower fixing bates style, equipped with a speedometer Ø5,3cm upscale.

450 €

Motorcycle headlight Ø180mm - Brushed trim ring

Classic motorcycle headlight with British style, 180mm diameter. We offer it as a universal version, or a version designed for Triumph and Moto Guzzi, compatible with your original wiring harness.

The casing is in satin black metal, two different trim ring finishes are available. M8 side fixations.

95 €

Bates motorcycle universal headlight

Universal Bates type headlight for motorcycle. This lower fixation lighthouse is 15cm diameter. Its casing and trim ring enables you to visually lighten your fork tubes and improve the look of your motorcycle.

It comes without fixation bracket and a plug & play wiring harness.

64 €

Universal classic headlight

Universal classic metal headlight, 200mm diameter. More flat than most of the original headlights (depth : 135mm), it will offer a stronger look to your bike. The casing is in satin black metal, the hooping is available in chromed and brushed finish.

This part suits the H4 light bulbs. It's EU an approved part. 

95 €

Yellow H4 bulb

Yellow H4 bulb for motorcycle headlight. Fits any headlight using an H4 bulb in stock configuration. It enables you to offer a firmly vintage look to your motorcycle, without adding a filter on your headlight pane. 12V100/90W.

This product preserve the lighting qualities of your motorcycle. Perfect for a backdating projet.

12 €

Universal exhaust muffler

Universal exhaust muffler in aluminium. This silencer fits any engine size motorcycle and offers a flawless brushed finish, perfect to improve the look and sound of your build. 

It includes a M8 insert for the fixation, and a spring on the other side. Available in two different lenght and for manifolds in diameter Ø38mm, Ø40mm and Ø42,5mm. 

Sold per unit.

225 €

Bindings headlight

Motorcycle headlight bracket, for M8 side fixation. The brackets are designed and manufactured in BAAK's workshop in France.

Only available in satin black.

  • Ø41mm for TRiumph Bonneville (60mm length for original lighthouse)
  • 40mm and 60mm length for Moto Guzzi V7
  • Ø41mm and length 60mm for Triumph Street and Twin T120 (Doesn't fit with original headlight)
  • Ø43mm for BMW NineT

99 €

Leather handlebar grips

Leather handlebar grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. 

Available in aged brown, gold, black and ruby leather. Four thread colours available so it perfectly suits your bike.

Available for 25,4mm (1 inch) and 22mm handlebars.

145 €

Handlebar grips

Left and right handlebar grips Renegade, produced by Biltwell for character motorcycle. Allows a better handtaking of your handlebar, and an incredible look.

Handlebar diameter 1 "or 22mm. Comes in pairs.

18 €

Handlebar grips

Thruster left and right handlebar grips produced by Biltwell motorcycles. Allows a better handtaking of your handlebar, and an incredible look.

Available in black and brown. Comes in pairs.

Handlebar diameter 1 "or 22mm.

18 €

Fatbar handlebar n°1

Fatbar handlebar n°1 and risers / clamps in aluminium. This bar is perfect to give a more impressive look to your bike. This wide handlebar allows a more comfortable riding position than the original ones. 

The centric part is 28mm diameter, the ends are 22mm diameter, which can require to adapt compatible handlebar clamps in Fatbar handlebar as the ones we offer in option with this part.

115 €

Fatbar handlebar n°1 with leather protection

Fatbar handlebar n°1 with crossbar and leather / foam protection. This handlebar has a 22mm diameter for the grips and 28,6mm diameter for the clamps. Its design offers a confortable riding position. It's only available in satin black powder coat painting. 

Can be provided with optional BAAK aluminium handlebar clamps.

160 €

Handlebar

Fatbar handlebar n°2, made out of steel. This Fatbar type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a combortable riding position. 

It's available in satin black finish only.

115 €

Scroll To Top